This topic is locked
Posted 17 October 2023 - 22:37
ciao volevo domandare che sarebbe ora che fate una imagine per dreambox 7020hd e 7020hdv2 grazi
hello i wanted to ask that it would be time you make an image for dreambox 7020hd and 7020hdv2 thank you
Edited by Frenske, 18 October 2023 - 08:21.
Please only use English, Dutch or German language.
Posted 18 October 2023 - 08:21
This won’t happen due to obvious reasons related that DMM stopped all support.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. 
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 18 October 2023 - 08:52
Edited by littlesat, 18 October 2023 - 08:52.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 18 October 2023 - 14:26
This won’t happen due to obvious reasons related that DMM stopped all support.
Support will never come, DMM is bankrupt and no longer exists.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 18 October 2023 - 18:50
Well… officially it is ‘on hold’. Only the chairman is still present, all others are layed-off… An official Chapter11 has not been issued (yet)…
Leontech is no longer producing for DreamProperty GmbH due to lack of funds..
Posted 18 October 2023 - 19:48
Point is that you can forget anything like support ever coming from DMM, the rest isn't really relevant.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 19 October 2023 - 10:02
Posted 19 October 2023 - 14:06
everything from enigma2 is end of story.Almost all manufacturers of e2 boxes have stopped production.Nowadays, with smart TVs, external STBs are no longer necessary.Smart TVs can also display an enigma2 GUI to operate them.The openpli developers have no interest in becoming more modern, they stick with a 20 year old thing.
The only thing that is true is the last line, and you'e not much help there either. I'm still waiting for your first contribution.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 19 October 2023 - 14:34
everything from enigma2 is end of story.Almost all manufacturers of e2 boxes have stopped production.Nowadays, with smart TVs, external STBs are no longer necessary.Smart TVs can also display an enigma2 GUI to operate them.The openpli developers have no interest in becoming more modern, they stick with a 20 year old thing.
The only thing that is true is the last line, and you'e not much help there either. I'm still waiting for your first contribution.
Edited by luisteraar, 19 October 2023 - 14:35.
Posted 19 October 2023 - 15:22
Maybe lookup the word "contribution" in the dictionary.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 19 October 2023 - 15:25
..... I'm still waiting for your first contribution.
....and that's a fact!
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the 
button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Posted 19 October 2023 - 15:32
Contribution to public
It wil come to contribution if it can be installed on all (newer) samsung TV.s
convert it to LG is also possible but need work and time
It's private project now .
If a openpli developer also wil work on it that wil be great.
Posted 19 October 2023 - 16:13
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the button on the buttom right of this message
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Posted 19 October 2023 - 16:22
The point I see is
If i have a contribution certificate then i can make it public
so that every one can install it via usb.
Until then i have to work in develop mode (restricted mode)
TV's are protected to install all software.
Developrs can help me to speed it up.
Iám also thinking about a general loader on the tv so
it can install from the stb
Edited by luisteraar, 19 October 2023 - 16:26.
Posted 19 October 2023 - 16:31
Nowadays you can offer a sneak preview so please post some nice movies on YouTube and offer the link to the ones that have shown any interest. In that way you can show your innovation to us and you’ll never encounter any license issues. Isn’t that a great idea? Then the interested users are finally given the opportunity to witness your amazing innovations after which the flag can be raised. Or aren’t you interested to show your innovations?
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 19 October 2023 - 16:37
It is not a inovation just converting the enigma2 gui to html5.
The modern way.
OK no one interested then i go on on my way.
I was trying to offer it so others have use of it.
Posted 19 October 2023 - 17:39
Why do you reply ‘no one is interested’?It is not a inovation just converting the enigma2 gui to html5.
The modern way.
OK no one interested then i go on on my way.
I was trying to offer it so others have use of
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 20 October 2023 - 09:22
The point I see is
If i have a contribution certificate then i can make it public
so that every one can install it via usb.
Until then i have to work in develop mode (restricted mode)
TV's are protected to install all software.
Developrs can help me to speed it up.
Iám also thinking about a general loader on the tv so
it can install from the stb
You're still missing the point, you're talking about a specific plugin for your TV, we're talking about all the improvements that you talk about a lot but haven't released one publicly yet so that everyone can benefit from them.
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the button on the buttom right of this message
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Posted 20 October 2023 - 09:41
The point is it is stil in develop state.
If there are testers am i willing to explain how to
install for testing.
Posted 20 October 2023 - 14:38
Not sure if you were paying attention, but this is the OpenPLi STB software forum, not the samsung TV app forum. We couldn't care less about that, there are plenty of TV apps already that can be used to view streams from a box (any that accepts m3u8 files will do).
If you can't be bothered to help with what we're doing here, then by all means move to some other forum, I'm sure members of both forums will appreciate that.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
0 members, 2 guests, 0 anonymous users
