578 replies to this topic

[neo29200]

I'm very but Thanks for your answers

[FloydKulis]

 

Witam 

Chcę zwrócić uwagę ,że nie działa  moduł CI+ECP CANAL+

Czy jest szansa na uzdrowienie ?

Tak zainstalowałem " enigma2 - plugin - Extensions - ci_plus_helper - openpli8 . x_3_all . ipk" moduł jest widoczny, ale nie można go dodać, caid i nie odtwarza programów

 

Czy utworzyłeś folder /etc/ciplus?

Wyjmij moduł, a następnie włóż go z powrotem. Jeśli wszystko pójdzie dobrze, w telewizorze pojawi się baner informacyjny, na którym będziesz mógł śledzić proces.

Tak folder jest , ale nadal nie odtwarza i jest komunikat że moduł jest niezgodny .

Nadmienię ,że dekoder to VU ULTIMO 4K

 

Did you manage to run "Black Module" for VU on Openpla?

[sety]

WireGuard not installed

openpli 9.0-release vuduo4kse

vuduo4kse login: root
root@vuduo4kse:~# opkg install kernel-module-wireguard
 * opkg_prepare_url_for_install: Couldn't find anything to satisfy 'kernel-module-wireguard'.
root@vuduo4kse:~#
root@vuduo4kse:~# opkg install wireguard-tools
 * opkg_prepare_url_for_install: Couldn't find anything to satisfy 'wireguard-tools'.
root@vuduo4kse:~#

[sety]

 

WireGuard not installed

openpli 9.0-release vuduo4kse

vuduo4kse login: root
root@vuduo4kse:~# opkg install kernel-module-wireguard
 * opkg_prepare_url_for_install: Couldn't find anything to satisfy 'kernel-module-wireguard'.
root@vuduo4kse:~#
root@vuduo4kse:~# opkg install wireguard-tools
 * opkg_prepare_url_for_install: Couldn't find anything to satisfy 'wireguard-tools'.
root@vuduo4kse:~#

Friends, maybe someone will respond, I need WireGuard, it used to work without problems, now it is not on FID's at all, 

for the sake of interest I installed OpenATV, it works there without problems, 

but I love it) OpenPLi, if I wrote in the wrong topic, please move the message

[WanWizard]

I've seen your post, but you'll have to wait until I've got time. It might be related to a reset of the buildservers which triggered a complete rebuild of all images.

[sety]

WanWizard thank you very much, I will of course wait, no problem, the main thing is that there will be WireGuard

[Tomalef]

Hello everybody

I installed the OpenPLi 9.0 image on an Octagon SF8008. 

From then on, the up button every 5 minutes opens the channel menu.

I took the batteries out of the control and it happens the same way.

I also reset the box, installed everything again and the same thing happens

I was only able to solve it by going to the "button up" settings and setting it to "do nothing"

Is this normal, or is there a way to solve it?

Thanks in advance

[DimitarCC]

You can try to remove /lib/modules/4.4.35/extra/hisi_keys.ko and reboot. It should solve the rcu issue

[WanWizard]

What causes this? I use an SF8008 as my current office / test box, and I've never seen this behaviour? IR interference?

[DimitarCC]

On many of the owners of sf8008 here that driver cause rcu to get crazy with no obvious reason. I dont know what causes that. But removing that ko fixes all the issues with crazy rcu....

[Tomalef]

You can try to remove /lib/modules/4.4.35/extra/hisi_keys.ko and reboot. It should solve the rcu issue

 

Solved, :-) 

Thank you very much for sharing DimitarCC

[WanWizard]

WanWizard thank you very much, I will of course wait, no problem, the main thing is that there will be WireGuard

 

Have you checked again? It should be in the feeds now.

[mjray]

Ok.

 

Afaik there is nothing that allows you to configure the output, audio should always be available, video if you select RCA as output.

 

I haven't got one of these cables myself, so I can't test.

It seems like there's some setting missing from alsamixer or /proc/stb/audio which should unmute that output. Is there any way I can test except downgrading to 6.x and seeing what's in there? Is there much risk in downgrading/upgrading repeatedly, other than annoying other users of the device?

 

I think I've a spare cable somewhere here (consequence of taking bits off old video kit before disposal). Can I send it to you?

[WanWizard]

Alsa isn't used on the box? A/V is processed completely in hardware.

 

And everything in /proc/stb is drivers, we don't have access to the source code, it is the manufacturer that should fix those.

[Isaac]

Is it possible to always (!) show the clock in the display (SF8008)?

(running, standby, off)

[WanWizard]

Install the vfdcontrol plugin.

[mjray]

Alsa isn't used on the box? A/V is processed completely in hardware.

 

Yes, I realise that. I said it seems like an alsa mute control is off somewhere, not that it's actually what's happening (because if it was, I'd be able to fix it!).

 

And everything in /proc/stb is drivers, we don't have access to the source code, it is the manufacturer that should fix those.

Have the drivers changed between 6 and 9? Is there a changelog? As usual, I'm not even sure where I should be looking.

Edited by mjray, 29 October 2024 - 17:46.

[WanWizard]

What box are you talking about exactly? OpenPLi 6.2 is about 7 years old, so depending on the box, chances are...

[gianny40]

Hi, I recently installed version 9 on my decoder, everything works fine, but I have a problem, through a procedure I installed openvpn and everything went well, but I don't know how to check if the vpn works, I tried to check the IP if it has changed with the IP Checker plugin, but after the installation it is not displayed in the plugins, if you can help me solve this problem I would be grateful.