46 replies to this topic

[WanWizard]

Thanks!

[rantanplan]

As mentioned above, it would be possible to try using the Kodi Remote plugin from your android phone.

[rantanplan]

 

The Dual driver was updated on 11.9, it is possible that there were changes regarding 'mali'.
Or the rebuild simply doesn't recognize the new driver.

 

Problem was in the BSP, driver recipe wasn't added to MACHINE_ESSENTIAL so it wasn't added to the image.

 

So Kodi starts now on my box, but the OK problem is still there, even with the patch from @foxbob above.

 

I know that it doesn't work that easily and that foxbob unfortunately starts from a different basis.

All versions were tested six months ago, unfortunately without success.
I'm sure that you could use the lirc package here too, but lirc also needs to be implemented in the build.

But I thought it would be much easier and less extensive to look for the error in the e2.
But I don't have the ability to do that myself.

There is definitely a limitation of the error in e2.

https://forums.openp...dpost&p=1525755

this Commit
https://github.com/O...82e52b5b48c2fd3
This small commit solved the 'ok' problem at the time.
It has been changed again somewhere.

[WanWizard]

I can't comment either way, I can only do a bit of trial and error testing.

 

Lets see what Beeker comes up with tomorrow.

[Beeker]

 

 

 

There is definitely a limitation of the error in e2.

https://forums.openp...dpost&p=1525755

this Commit
https://github.com/O...82e52b5b48c2fd3
This small commit solved the 'ok' problem at the time.
It has been changed again somewhere.

 

 

That commit has nothing to do with the OK button. The OK button works with and without that commit in E2.

It has actually nothing to do with the remote control (it looks like it is).

It solves an empty listbox,, and with an empty listbox there's nothing to go up and nothing to go down.

 

I've read everything and never read a confirmation that this commit was the culprit, only maybe, perhaps, might be, could be,

 

Kodi works with Enigma2 killed too.

 

Anyway I'll do some test.

And I have some things in mind to test.

 

I'll let you know.

Edited by Beeker, 2 November 2023 - 16:05.

[rantanplan]

https://github.com/s...omment-69394140

 

My statement refers to this comment.

After a lot of work on this plugin, I can't say anything more about it.
If desired, I can divide the patch a little to make it easier to work on.

Edited by rantanplan, 2 November 2023 - 19:12.

[Beeker]

For Kodi you can use the Mute button as OK button for now.

Maybe you need to re-install Kodi.

This workaround should be in NB now.

Edited by Beeker, 6 November 2023 - 09:57.

[littlesat]

NB = Nightly Build... 

@Beeker, Good temporary work-a-round... 

It is still obvious that the simple 'OK' button cannot be forwarded to Kodi...

Edited by littlesat, 6 November 2023 - 12:23.

[WanWizard]

I backported it to 9.0-release, as Kodi there is unusable too.

[Beeker]

NB = Nightly Build... 

@Beeker, Good temporary work-a-round... 

It is still obvious that the simple 'OK' button cannot be forwarded to Kodi...

I miss the code for the OK button.

libxkbcommon-1.0.3 provides the macros. xkbcommon-keysyms.h

/* Cursor control & motion */

#define XKB_KEY_Home                          0xff50
#define XKB_KEY_Left                          0xff51  /* Move left, left arrow */
#define XKB_KEY_Up                            0xff52  /* Move up, up arrow */                   82            
#define XKB_KEY_Right                         0xff53  /* Move right, right arrow */             84
#define XKB_KEY_Down                          0xff54  /* Move down, down arrow */
#define XKB_KEY_Prior                         0xff55  /* Prior, previous */
#define XKB_KEY_Page_Up                       0xff55
#define XKB_KEY_Next                          0xff56  /* Next */
#define XKB_KEY_Page_Down                     0xff56
#define XKB_KEY_End                           0xff57  /* EOL */
#define XKB_KEY_Begin                         0xff58  /* BOL */


/* Misc functions */

#define XKB_KEY_Select                        0xff60  /* Select, mark */
#define XKB_KEY_Print                         0xff61
#define XKB_KEY_Execute                       0xff62  /* Execute, run, do */
#define XKB_KEY_Insert                        0xff63  /* Insert, insert here */
#define XKB_KEY_Undo                          0xff65
#define XKB_KEY_Redo                          0xff66  /* Redo, again */
#define XKB_KEY_Menu                          0xff67
#define XKB_KEY_Find                          0xff68  /* Find, search */
#define XKB_KEY_Cancel                        0xff69  /* Cancel, stop, abort, exit */
#define XKB_KEY_Help                          0xff6a  /* Help */
#define XKB_KEY_Break                         0xff6b
#define XKB_KEY_Mode_switch                   0xff7e  /* Character set switch */
#define XKB_KEY_script_switch                 0xff7e  /* Alias for mode_switch */
#define XKB_KEY_Num_Lock                      0xff7f

I've tried a lot. I had added 0xff59- 0xff5f to XKB_KEY_Ok1.... XKB_KEY_Ok10 and more.

 

In Enigma2 I found this regarding RC codes, but I don't see a connection.

 

keyids.py

	"KEY_HOME": 102,
	"KEY_UP": 103,
	"KEY_PAGEUP": 104,
	"KEY_LEFT": 105,
	"KEY_RIGHT": 106,
	"KEY_END": 107,
	"KEY_DOWN": 108,
	"KEY_PAGEDOWN": 109,
	"KEY_INSERT": 110,
	"KEY_DELETE": 111,
	"KEY_MACRO": 112,

 

[Beeker]

I also synced everything regarding Kodi with OE-A. I only needed to remove a small patch for ffmpeg, because I can't build with Clang in OpenPLi.

I could solve a few compile errors, but not all so quickly.

[rantanplan]

https://github.com/k...b214cb3c8994b5e

Maybe you can use it

[k0bi]

NB is for all OS versions? I have installed latest for my zgemma h7s but mute button is still working as mute.
Anyway thanks guys for your all efforts, some days it will work

[rantanplan]

https://openpli.org/

 

buildstatus devekop ;-)

only when it's finished could it be in there.
But it is also possible that it still needs a review.
I don't know if the last rebuild had the patch included.

[WanWizard]

It should be in the nightly build image dated November 6th.

[antrabe]

no works on oactagon sf8008 desapear the picture in he screen but seems that kodi is active but not image

[littlesat]

no works on oactagon sf8008 desapear the picture in he screen but seems that kodi is active but not image

This is kind of off-topic I guess as we're concentrating here on the OK button not working in Kodi.

[WanWizard]

Just flashed my own develop build (from last night) on my test box, and I can confirm the mute-key-workaround works.

[k0bi]

Works �� thanks

After this all storm for not working OK button I have discovered Netflix is only play sound but no video so sad �

[WanWizard]

We don't make Kodi, so you have to take that problem elsewhere.