Posted 11 November 2023 - 17:48
I open this issue to know if someone more happen or if its only to me due my receive AV is a denon AV2100W when i active the plugin kodi the HDMI output is not working. I can see through web ip that works but i cant see on the TV.
With last
OpenPLi » Nightly buildsEdited by antrabe, 11 November 2023 - 17:49.
Posted 11 November 2023 - 19:05
You can't see what on the TV? The Kodi user interface? The UI of the box itself?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 11 November 2023 - 22:44
Yes, its like the hdmi output stop and with the web i can see with screenshots that kodi is working. I stop the kodi plugin checking the screenshots and he hdmi works again. Very strange its the only image that works in this way.
I have multiboot opbh and works fine kodi.
There is no crash only when active kodi hdmi output stop. I check to change the hdmi cable and is the same behaviour.
Posted 12 November 2023 - 13:39
I can't reproduce this on my text box, let me try on an SF8008.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 12 November 2023 - 13:47
if you need i can post any log. I dont know if with any telne command can be usseful. Or if you have octagon SF8008 you can check directly if happen the same than in mine.
Edited by antrabe, 12 November 2023 - 13:51.
Posted 12 November 2023 - 13:56
I have a different problem. I tested with a current nightly build.
Kodi starts without problems, but with a weird cracking sound when it cuts the TV. When I close Kodi again, I don't get TV video back, only audio. No image visable in the WebIf either. And as soon as I try to zap, the box completely locks up, the only thing I can do is use the power switch.
This smells like a driver crash to me.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 12 November 2023 - 14:06
I have a different problem. I tested with a current nightly build.
Kodi starts without problems, but with a weird cracking sound when it cuts the TV. When I close Kodi again, I don't get TV video back, only audio. No image visable in the WebIf either. And as soon as I try to zap, the box completely locks up, the only thing I can do is use the power switch.
This smells like a driver crash to me.
yes thats exactly happen to me. volume is top up level and no more picture. And if you via web can see the kodi menu and go out of the plugin the picture back but with black screen. This happen on opbh and was solved with the new kodi version i think 20.2.
Posted 12 November 2023 - 16:55
Afaik OpenBH is an OE-Alliance image, and our Kodi configuration should be in sync what that.
It could be that OE-A has other / newer drivers, they usually get test drivers, which we only implement stable drivers if provided by the manufacturer.
edit; a quick search shows this is the case, they have received new drivers 3 times, while we recevied the last update on 20221108. So this requries complaining to Octagon.
Edited by WanWizard, 12 November 2023 - 16:55.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 12 November 2023 - 18:14
Afaik OpenBH is an OE-Alliance image, and our Kodi configuration should be in sync what that.
It could be that OE-A has other / newer drivers, they usually get test drivers, which we only implement stable drivers if provided by the manufacturer.
edit; a quick search shows this is the case, they have received new drivers 3 times, while we recevied the last update on 20221108. So this requries complaining to Octagon.
Ok thanks for the info. I could request directly to octagon the last drivers in this email : info@octagon-germany.de.
Posted 13 November 2023 - 12:04
We've contacted them as well, but so far without a response.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 13 November 2023 - 18:11
We've contacted them as well, but so far without a response.
ok thank you very much I´ll try to conatct them to push a little bit more.
Posted 15 November 2023 - 18:00
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. 
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 15 November 2023 - 18:35
@Antrabe
I think that some nuance is needed to get it clear what is the truth regarding who does what, how and when.
As we always made clear, is that the driver developers of all manufacturers maintain the BSP. As soon as the drivers are updated in the BSP by the developer we can update those details in our build. No sooner no later.
Obviously the one that replied to your request is not informed by the present management how this works with Openpli. Other teams build their own BSP but we still feel it should be the responsibility of the manufacturer. The name of the person that seemed to have been answered your mail is already retired since 2021. My contact wondered who actually / really answered to your request. That specific person lives in Turkey and has no internet. They should change the name in the male like I just suggested.
The driver developers are about to update our BSP and from the next build after the update we also have the latest drivers. I hope I have cleared this Babylonian confusion of speach.
Is the official email in their website. Yes could be used by several octagon users but the access should be by the manufacturer. They develop test and upload the drivers as far as he told me so we should wait. Thanks
Posted 16 November 2023 - 06:22
opePli https://github.com/O...dules-sf8008.bb
oe-alliance https://github.com/o...dules-sf8008.bb
Use openATV for test new drivers.
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Posted 9 December 2023 - 17:14
I found the solution if i change the resolution to 1080 the picture comes again and works fine. Now only the issue with the button remain OK not works but mute yes. I thinks this 2 issues are easy to solve for the coders.
Posted 8 January 2024 - 20:22
The solution is already provided by Octagon please Openpli Team could you check if the fix its correct? and could be added to the git?
Thanks
Posted 8 January 2024 - 22:43
Develop and 9.0-release already have the latest driver updates, the build for 8.3-release is currently running.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
0 members, 3 guests, 0 anonymous users
