35 replies to this topic

[Tech]

or

/etc/init.d/softcam restart

[Pr2]

Trying to switch a card into n@gr@ mode with the STB internal reader is a real challenge.
The card is very sensitive to frequency so it is better to use a TBS TBS3102 card reader where the clocking is precise. It is also working with the red external reader that you can find on AliExpress for exemple.
But I don't know if the oscam-cak is compiled with external card reader support. If it's not I would advice to enable it.

Edited by Pr2, 3 December 2023 - 15:09.

[Robinson]

Here is something I can find on Oscam wiki:

 

 

Keep in mind that most internal readers of non-dreamboxes clock the cards automatically and copletely ignore any user clockspeed setting. But you should set cardmhz and mhz anyway, as its still used to calculate the correct timings in OSCam. If you set cardmhz/mhz correct the timings will better match with the actual (automatically) clockspeed of the internal card reader. As for a result slighly better ecm responses or more stable functioning.

 

I actually have a 1861 Nagra card. It worked for a few days in the internal reader of HD51 byt then suddenly the entitlements disappeared.

I will probably have to call my provider. I'm not sure if the card is working in CI+ CAM. I will check tomorrow.

[WanWizard]

Not sure how entitlements can dissappear (if you mean in the UI, it is because they are expired).

 

There are quite a few issues with EMM's and the oscam CAK7 code. With dvbapi (i.e. card in the local box) it is reported that the card updates, but if the card is in another box, it will not receive EMM's and entitlements don't update.

[Robinson]

Maybe they expired indeed..OScam webiterface does not show any and no new entitlements have been received.

Perhaps it is a question of correct entries in READER section of oscam.server.

I am still wondering if I need to set cardmhz and mhz values.

[WanWizard]

I am still wondering if I need to set cardmhz and mhz values.

 

No, and like I said, virtually all hardware is frequency locked, and these values don't do anything.

 

The problem is your card hasn't received any EMM's, so the entitements didn't update. I have the same with mine, I need to run them in SECA mode to get them updated.

[Robinson]

Another quotation from OSCAM:

 

 

E.G. You have a dream 800 HD PVR, thats a mips so you should set cardmhz to 2700. We got a nagra card that should run on 5 MHz. If

you want to clock the card ok just use cardmhz = 2700 an mhz = 500.

 

 

The question is what the cardmhz value is for HD51 and what frequency does Nagra CAID 1861 run.

[WanWizard]

No, and like I said, virtually all hardware is frequency locked, and these values don't do anything.

 

[Dorfkind]

What provider is it?

Please provide a log, so we can see entitlements etc...

 

Mine looks like
 

2023/09/24 08:12:22 379F077F r   (reader) lower_card [nagra merlin] CAID:   186A
2023/09/24 08:12:22 379F077F r   (reader) lower_card [nagra merlin] Prv.ID: 00 00 34 11 (sysid)
2023/09/24 08:12:22 379F077F r   (reader) lower_card [nagra merlin] Provider Sys ID: 34 11 is active to: 2023/11/14
2023/09/24 08:12:22 379F077F r   (reader) lower_card [nagra merlin] -----------------------------------------
2023/09/24 08:12:22 379F077F r   (reader) lower_card [nagra merlin] |id  |tier    |valid from  |valid to    |
2023/09/24 08:12:22 379F077F r   (reader) lower_card [nagra merlin] +----+--------+------------+------------+
2023/09/24 08:12:22 379F077F r   (reader) lower_card [nagra merlin] |8011|0BEA    |2022/12/25  |2023/12/26  |
2023/09/24 08:12:23 379F077F r   (reader) lower_card [nagra merlin] -----------------------------------------

For my HD+ HD04 card it says

mhz                           = 500

I didin't change it, was standard...

HTH

[WanWizard]

It should remain default, the reader takes the settings from the ATR.

[Robinson]

Here is my reader entry for Polish Polsat CAID 1861:

[reader]
label                         = CP
enable                        = 1
description                   = czytnik wbudowany
protocol                      = internal
device                        = /dev/sci0
autospeed                     = 0
fallback                      = 1
caid                          = 1861
boxkey                        = XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
rsakey                        = XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
detect                        = cd
mhz                           = 368
cardmhz                       = 2700
group                         = 1
blockemm-unknown              = 1
 MOD1-XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
MOD2-XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX 
data50                        = XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
mod50                         = XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

And here is part of the log:

2023/12/03 19:13:02 4F49399B c   (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 9 disabled ecmpids!
2023/12/03 19:13:02 4F49399B c   (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 1861 PROVID 000000 ECMPID 0E35 ANY CHID PMTPID 040D VPID 0216
2023/12/03 19:13:03 4F49399B c      (ecm) dvbapiau    (1861@000000/0000/3ABD/89:5CD284E0FF1BEBD203334CFA8C039B37): not found (191 ms) by CP          - TVP 1 HD                (lg)
2023/12/03 19:13:03 4F49399B c   (reader) CP [nagra] EMM: reader_caid 1861 != emmpid caid 0B01 -> SKIP!
2023/12/03 19:13:03 4F49399B c   (reader) CP [nagra] EMM: reader_caid 1861 != emmpid caid 0500 -> SKIP!
2023/12/03 19:13:03 4F49399B c   (reader) CP [nagra] EMM: reader_caid 1861 != emmpid caid 0B00 -> SKIP!
2023/12/03 19:13:03 4F49399B c   (reader) CP [nagra] EMM: reader_caid 1861 != emmpid caid 1803 -> SKIP!
2023/12/03 19:13:03 4F49399B c   (reader) CP [nagra] EMM: reader 1861 match since emmpid has no provid -> SEND!
2023/12/03 19:13:03 4F49399B c   (reader) CP [nagra] EMM: reader_caid 1861 != emmpid caid 0100 -> SKIP!
2023/12/03 19:13:03 4F49399B c   (reader) CP [nagra] EMM: reader_caid 1861 != emmpid caid 0100 -> SKIP!
2023/12/03 19:13:03 4F49399B c   (reader) CP [nagra] EMM: reader_caid 1861 != emmpid caid 0100 -> SKIP!
2023/12/03 19:13:03 4F49399B c   (reader) CP [nagra] EMM: reader_caid 1861 != emmpid caid 1813 -> SKIP!
2023/12/03 19:13:03 4F49399B c   (reader) CP [nagra] EMM: reader_caid 1861 != emmpid caid 1813 -> SKIP!
2023/12/03 19:13:03 4F49399B c   (reader) CP [nagra] EMM: reader_caid 1861 != emmpid caid 1813 -> SKIP!
2023/12/03 19:13:03 4F49399B c   (reader) CP [nagra] EMM: reader_caid 1861 != emmpid caid 1884 -> SKIP!
2023/12/03 19:13:03 4F49399B c   (reader) CP [nagra] EMM: reader_caid 1861 != emmpid caid 18FE -> SKIP!
2023/12/03 19:13:03 4F49399B c   (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 9 disabled ecmpids!
2023/12/03 19:13:03 4F49399B c   (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 1861 PROVID 000000 ECMPID 0E35 ANY CHID PMTPID 040D VPID 0216
2023/12/03 19:13:03 4F49399B c      (ecm) dvbapiau    (1861@000000/0000/3ABD/89:5CD284E0FF1BEBD203334CFA8C039B37): not found (1 ms) by CP          - TVP 1 HD               
2023/12/03 19:13:04 4F49399B c      (emm) emm:
2023/12/03 19:13:04 4F49399B c      (emm)   82 70 8B 00 00 00 00 00 04 84 00 B4 08 3F 0E 52 
2023/12/03 19:13:04 4F49399B c      (emm)   F0 43 0A 32 CF 0F 45 31 FC E0 EC 6B 20 FF 4F 00 
2023/12/03 19:13:04 4F49399B c      (emm)   2B 0B B1 24 D5 D3 A7 00 B4 D3 DE EA 9A ED 94 27 
2023/12/03 19:13:04 4F49399B c      (emm)   19 A6 3A 93 8B 6F DF 02 0B 28 40 C9 38 8D 4D 1D 
2023/12/03 19:13:04 4F49399B c      (emm)   24 F5 E2 0D C0 FD 80 1F 2C C7 56 E8 71 69 84 A8 
2023/12/03 19:13:04 4F49399B c      (emm)   84 70 7F 72 AA BE 17 02 6A 47 A1 13 E4 84 04 6C 
2023/12/03 19:13:04 4F49399B c      (emm)   CF 85 FF C0 74 2D 94 E7 69 C7 96 2A BF 80 DE 7A 
2023/12/03 19:13:04 4F49399B c      (emm)   DE 52 3E AA 4C 3E 26 06 69 FB 2B E1 A4 FF 9D B0 
2023/12/03 19:13:04 4F49399B c      (emm)   53 B6 16 6C FF 9B 5C F9 F5 10 A3 F8 43 07 
2023/12/03 19:13:04 4F49399B c   (reader) CP [nagra] EMM: reader 1861 match since emmpid has no provid -> SEND!
2023/12/03 19:13:04 4F49399B c   (reader) CP [nagra] EMM: emmtype global. Reader serial ################.
2023/12/03 19:13:04 4F49399B c   (reader) CP [nagra] EMM: emm UA/SA: ################.
2023/12/03 19:13:04 4F49399B c   (reader) CP [nagra] EMM: emm is being sent to reader
2023/12/03 19:13:04 4F49399B c   (reader) emulator [emu] EMM: skip emm, group mismatch

I have no tiers under the entitlement tab.in OScam Webinterface.

Yesterday I had 3 tiers (don't remember the expiry dates) but in the evening the entries disappeared.

 

:

[Dorfkind]

Maybe you find some hints here
https://forum.grater...czaniu-kanałów/

 

I just can read fragments, sorry

[Robinson]

What provider is it?

Please provide a log, so we can see entitlements etc...

 

 

Another part of the log looks like this.

Does anyone see something suspicious?

2023/12/04 11:52:05 5F5B2F27 r   (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max allotted of 1
2023/12/04 11:52:05 5F5B2F27 r      (emu) Reading key file: /etc/tuxbox/config/oscam-emu/SoftCam.Key
2023/12/04 11:52:05 5F5B2F27 r      (emu) Total keys in memory: W:0 V:15 N:0 I:6 F:122 G:0 P:172 T:12 A:0
2023/12/04 11:52:09 31FB3D36 r   (reader) CP [internal] detect native nagra card
2023/12/04 11:52:10 31FB3D36 r   (reader) CP [internal] ready for requests
2023/12/04 11:52:10 31FB3D36 r   (reader) CP [internal] found card system nagra
2023/12/04 11:52:10 31FB3D36 r   (reader) CP [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max allotted of 1
2023/12/04 11:52:10 31FB3D36 r   (reader) CP [nagra] ROM:    D N A S P 1 9 0
2023/12/04 11:52:10 31FB3D36 r   (reader) CP [nagra] REV:    M e r Q 2 B
2023/12/04 11:52:10 31FB3D36 r   (reader) CP [nagra] SER:    ############
2023/12/04 11:52:10 31FB3D36 r   (reader) CP [nagra] CAID:   1861
2023/12/04 11:52:10 31FB3D36 r   (reader) CP [nagra] Prv.ID: 00 00 70 01 (sysid)
2023/12/04 11:52:10 31FB3D36 r   (reader) CP [nagra] Prv.ID: 00 00 00 00 
2023/12/04 11:52:10 31FB3D36 r   (reader) CP [nagra] IRD ID: ############
2023/12/04 11:52:10 31FB3D36 r   (reader) CP [nagra] active to: 2024/02/04 02:32
2023/12/04 11:52:10 31FB3D36 r   (reader) CP [nagra] -----------------------------------------
2023/12/04 11:52:10 31FB3D36 r   (reader) CP [nagra] |id  |tier    |valid from  |valid to    |
2023/12/04 11:52:10 31FB3D36 r   (reader) CP [nagra] +----+--------+------------+------------+
2023/12/04 11:52:10 31FB3D36 r   (reader) CP [nagra] -----------------------------------------
2023/12/04 11:52:10 00000000 s     (main) init for all local cards done
2023/12/04 11:52:10 00000000 s (emmcache) loaded 249 emmcache records from /etc/tuxbox/config/oscam-emu/oscam.emmcache in 4 ms
2023/12/04 11:52:10 00000000 s (emmcache) loaded 249 emmstat records from /etc/tuxbox/config/oscam-emu/oscam.emmstat in 1 ms
2023/12/04 11:52:10 00000000 s (anticasc) anti cascading disabled
2023/12/04 11:52:10 00000000 s     (gbox) local gbox failed init
2023/12/04 11:52:10 4F49399B c   (client) plain dvbapi-client granted (anonymous, au=off)
2023/12/04 11:52:10 4F49399B c   (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam-emu/oscam.ccache
2023/12/04 11:52:10 4F49399B c   (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)
2023/12/04 11:52:10 4F49399B c   (dvbapi) PMT mode 6: Connecting to enigma CA PMT listen socket...

Probably the best way will be to move the card to the original equipment in order to get the entitlements. In my case it is a CI+ CAM.
 

[WanWizard]

au=off for dvbapi? so the card will never get emm's?

[Dorfkind]

no valid tiers...I would ask the provider to send an activision signal...and turn AU on, as WanWizard already said

[Robinson]

Do you mean oscam.user file?

[account]
user 			= dvbapi
group 			= 1
au 			= 1

In that case I will have to call the provider.

Thank you.