61 replies to this topic

[littlesat]

I have the idea that one time I experience it with a vu+ultimo 4K. Can you retry and then just wait. Here at that time it took minutes to get through it and then an update was performing fine. At that time I was thinking it could be a network or website performance issue but now I’m thinking it might be this…. No idea at the moment why.

Edited by littlesat, 25 December 2023 - 18:56.

[littlesat]

Thanks that you tried to reproduce it in the python’s console…. But I’m afraid that this does not lead to the spinner… but it is something else that needs also further investigations…

[Dimitrij]

Maybe add timeout...

	def getLatestImageTimestamp(self):
		def gettime(url):
			try:
				print('[UpdatePlugin] Trying to fetch time from %s' % url)
				data = urlopen("%s/Packages.gz" % url, timeout=5)
				if data:
					return strftime("%Y-%m-%d %H:%M:%S", gmtime(timegm(data.info().getdate('Last-Modified')) - altzone))
				return ""
			except Exception as er:
				print('[UpdatePlugin] Error in get timestamp', er)
				return ""
		return sorted([gettime(open("/etc/opkg/%s" % file, "r").readlines()[0].split()[2]) for file in listdir("/etc/opkg") if not file.startswith("3rd-party") and file not in ("arch.conf", "opkg.conf", "picons-feed.conf")], reverse=True)[0]

 

[littlesat]

I remember somehow in the past there was a timeout. Now I have no idea why it was removed. 5 sec delay is also long. But then still there is something behind it that it cannot retrieve the information. It is also kind of obvious it suddenly pops up…

Edited by littlesat, 26 December 2023 - 09:58.

[VeryClear]

Here's another log. This time it resumed on its own normally, after a spinning wheel of 2-3 minutes.
 
I've assigned the Update check to a 'long-yellow' press. Should be irrelevant though, I've also tried without using the hotkey.

 

Spoiler

[CI] done, found 2 common interface slots
[CI] Streaming CI routing interface not advertised, assuming DVR method
[CI] Streaming CI finish interface not advertised, assuming "tuner" method
[eInit] + (40) eServiceCenter
[eServiceCenter] settings instance.
[CI] Slot 0: reset requested
[eInit] + (41) Stream server
[CI] flush
[CI] ci inserted in slot 0
[Avahi] AvahiServiceEntry (null) (_e2stream._tcp) 8001
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] Will Register vusolo2 (_e2stream._tcp) on vusolo2:8001
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] Registered vusolo2 (_e2stream._tcp) on vusolo2:8001
[eInit] + (41) Encoders
[eInit] + (41) eServiceFactoryDVB
[eInit] + (41) eServiceFactoryFS
[eInit] + (41) eServiceFactoryM2TS
[eInit] + (41) eServiceFactoryHDMI
[eInit] + (41) eServiceFactoryTS
[eInit] + (41) eServiceFactoryWebTS
[eInit] + (41) eServiceFactoryDVD
[eInit] reached rl 70
[eDVBDB] ---- opening lame channel db
[eDVBDB] reading services (version 4)
[eDVBDB] loaded 476 channels/transponders and 6318 services
eDVBSatelliteEquipmentControl::clear()
[eDVBUsbAdapter] linking adapter1/frontend0 to vtuner0
[eDVBResourceManager] scanning for frontends..
[eDVBFrontend0] opening frontend
[eDVBFrontend0] opening frontend
[eDVBFrontend0] frontend 0 has DVB API 50a
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend0] close frontend
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend1] opening frontend
[eDVBFrontend1] opening frontend
[eDVBFrontend1] frontend 1 has DVB API 50a
[eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend1] close frontend
[eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend2] opening frontend
[eDVBFrontend2] opening frontend
[eDVBFrontend2] frontend 2 has DVB API 50a
[eDVBFrontend2] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend2] close frontend
[eDVBFrontend2] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBAdapterLinux] get demux 0
[eDVBAdapterLinux] get demux 1
[eDVBAdapterLinux] get demux 2
[eDVBAdapterLinux] get demux 3
[eDVBAdapterLinux] get demux 4
[eDVBAdapterLinux] get demux 5
[eDVBAdapterLinux] get demux 6
[eDVBAdapterLinux] get demux 7
[eDVBAdapterLinux] get demux 8
[eDVBResourceManager] found 2 adapter, 3 frontends(3 sim) and 9 demux
[eDVBLocalTimeHandler] Use valid Linux Time [:)] (RTC?)
[eEPGCache] Initialized EPGCache (wait for setCacheFile call now)
[eEPGTransponderDataReader] Initialized
[MAIN] Loading spinners...
[MAIN] found 7 spinner!
[setIoPrio] best-effort level 3 ok
[SystemInfo] ERROR: /usr/lib/enigma.info is not available! The system is unlikely to boot or operate correctly.
[HardwareInfo] Scanning hardware info
Detected: vusolo2 (1500A0)
[CamControl] No softcam link? /etc/init.d/softcam
[Misc_Options] 12Vdetect cannot open /proc/stb/misc/12V_output: No such file or directory
[Console] command: mount /dev/mtdblock2 /tmp/Multibootj2wl3yfd
[eConsoleAppContainer] Starting /bin/sh
[Console] command: umount /tmp/Multibootj2wl3yfd
[eConsoleAppContainer] Starting /bin/sh
[Multiboot] Bootslots found: {}
[Harddisk] enumerating block devices...
[Harddisk] new device=sda dev_path=/dev/sda disk_path=/dev/sda removable=False internal=True rotational=1 card=False
[Console] command: ('hdparm', 'hdparm', '-S0', '/dev/sda')
[eConsoleAppContainer] Starting hdparm
[Harddisk] new device=sdb dev_path=/dev/sdb disk_path=/dev/sdb removable=True internal=False rotational=1 card=False
[Keyboard] Adding keymap 'Dreambox Keyboard English' ('eng.kmap').
[Keyboard] Adding keymap 'Default (US)' ('default.kmap').
[Keyboard] Adding keymap 'Dreambox Keyboard Deutsch' ('dream-de.kmap').
[Keyboard] Adding keymap 'azerty keyboard' ('azerty.kmap').
[Keyboard] Adding keymap 'German keyboard' ('de.kmap').
Activating language English
[Keyboard] Activating keymap: 'Default (US)'.
[Console] command: loadkmap < /usr/share/keymaps/default.kmap
[eConsoleAppContainer] Starting /bin/sh
[Geolocation] Warning: Geolocation has been disabled by user configuration!
[NimManager] Reading satellites.xml
[gRC] main thread is non-idle! display spinner!
[NimManager] Reading cables.xml
[NimManager] Reading terrestrial.xml
[CI] ci inserted in slot 0
[CI SESS] slot: 0x7841a0
[CI SESS] RESOURCE MANAGER 1
[CI SESS] new session nb 1 0x742036a0
[CI SESS] sendOpenSessionResponse
[NIM] removing internal link on frontend id 0
eDVBSatelliteEquipmentControl::clear()
[SecConfigure] sec config cleared
[eDVBFrontend] setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7356 DVB-S2 NIM (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
[eDVBFrontend] setSlotInfo for dvb frontend 1 to slotid 1, descr BCM7356 DVB-S2 NIM (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
[eDVBFrontend] setSlotInfo for dvb frontend 2 to slotid 2, descr Nova-T Stick, need rotorworkaround No, enabled Yes, DVB-S2 No
[SecConfigure] slot: 0 configmode: simple
[eDVBSatelliteEquipmentControl::setSlotNotLinked] slot=0
[SecConfigure] diseqcmode: diseqc_a_b
[eDVBSatelliteEquipmentControl::addLNB] lnb=0)
...
[eDVBDB] Renumbering...
[CI SESS] slot: 0x7841a0
[CI SESS] DATE-TIME
[CI SESS] new session nb 2 0x742036c8
[CI SESS] sendOpenSessionResponse
[CI SESS] slot: 0x7841a0
[CI SESS] APPLICATION MANAGER 1
[CI SESS] new session nb 3 0x74203810
[CI SESS] sendOpenSessionResponse
[CI SESS] slot: 0x7841a0
[CI SESS] CA MANAGER
[CI SESS] new session nb 4 0x74203850
[CI SESS] sendOpenSessionResponse
[CI AM] in final state.
[CI SESS] slot: 0x7841a0
[CI AM] application info:
[CI AM] len: 13
[CI AM] application_type: 1
[CI AM] application_manufacturer: 00 00
[CI AM] manufacturer_code: 00 00
[CI AM] menu string: TivωSat
[CI AM] fixed menu string: TivSat
[Skin] Loading skin file '/usr/share/enigma2/skin_default/skin.xml'.
[fb] double buffering available!
[gFBDC] resolution: 720x576x32 stride=7680, 12960kB available for acceleration surfaces.
[font] Adding font '/usr/share/fonts/nmsbd.ttf' -> 'Regular'.
[font] Adding font '/usr/share/fonts/andale.ttf' -> 'Fixed'.
[font] Adding font '/usr/share/fonts/tuxtxt.ttf' -> 'Console'.
[font] Adding font '/usr/share/fonts/DejaVuSans.ttf' -> 'DejaVuSans'.
[font] Adding font '/usr/share/fonts/ae_AlMateen.ttf' -> 'Replacement'.
[font] Adding font '/usr/share/fonts/fallback.font' -> 'Fallback'.
[Skin] Loading skin file '/usr/share/enigma2/skin_default/skin.xml' complete.
[Skin] Loading skin file '/usr/share/enigma2/skin_subtitles.xml'.
[font] Adding font '/usr/share/fonts/LiberationSans-Regular.ttf' -> 'Subs'.
[font] Adding font '/usr/share/fonts/LiberationSans-Italic.ttf' -> 'Subsi'.
[font] Adding font '/usr/share/fonts/LiberationSans-Bold.ttf' -> 'Subsb'.
[font] Adding font '/usr/share/fonts/LiberationSans-BoldItalic.ttf' -> 'Subsz'.
[font] Adding font '/usr/share/fonts/fallback.font' -> 'Fallback'.
[Skin] Loading skin file '/usr/share/enigma2/skin_subtitles.xml' complete.
[Skin] Loading skin file '/usr/share/enigma2/display/skin_default/skin_display.xml'.
[Skin] Loading skin file '/usr/share/enigma2/display/skin_default/skin_display.xml' complete.
[Skin] Loading skin file '/usr/share/enigma2/PLi-FullNightHD/skin.xml'.
[fb] double buffering available!
[gFBDC] resolution: 1920x1080x32 stride=7680, 5400kB available for acceleration surfaces.
[Skin] Loading skin file '/usr/share/enigma2/PLi-FullNightHD/skin_templates.xml'.
[Skin] Loading skin file '/usr/share/enigma2/PLi-FullNightHD/skin_templates.xml' complete.
[Skin] Loading skin file '/usr/share/enigma2/PLi-FullNightHD/skin_plugins.xml'.
[Skin] Loading skin file '/usr/share/enigma2/PLi-FullNightHD/skin_plugins.xml' complete.
[font] Adding font '/usr/share/fonts/LiberationSans-Regular.ttf' -> 'Regular'.
[font] Adding font '/usr/share/fonts/lcd.ttf' -> 'LCD'.
[font] Adding font '/usr/share/fonts/tuxtxt.ttf' -> 'Console'.
[font] Adding font '/usr/share/fonts/andale.ttf' -> 'Fixed'.
[font] Adding font '/usr/share/fonts/DejaVuSans.ttf' -> 'DejaVuSans'.
[font] Adding font '/usr/share/fonts/fallback.font' -> 'Fallback'.
[Skin] Loading skin file '/usr/share/enigma2/PLi-FullNightHD/skin.xml' complete.
[Skin] Loading skin file 'skin_user.xml'.
[Skin] Warning: Skin file 'skin_user.xml' does not exist!
[CI SESS] slot: 0x7841a0
[CI CA]ca info:183d 183e 183f
[InputDevice] getInputDevices by-path
[InputDevice] Unknown device type: IR-receiver inside an USB DVB receiver
[InputDevice] getInputDevices mice
[InputDevice] getInputDevices mouse0
[eAVSwitch] cannot open /proc/stb/avs/0/input_choices: No such file or directory
[eDVBVolumecontrol] Setvolume: raw: 100 100, -1db: 0 0
[eTuxttxtApp] enable caching
[UsageConfig] NTP auto but not active, DVB time enabled
[eEPGCache] time updated.. but cache file not set yet.. dont start epg!!
[Timezones] Note: Classic time zones in '/etc/timezone.xml' are not available.
[Timezones] Setting time zone to 'Europe/Athens'.
[Timezones] Local time is 'Tue 26-Dec-2023 02:44:36' - UTC time is 'Tue 26-Dec-2023 00:44:36'.
[keymapparser] keymap file /usr/share/enigma2/keytranslation.xml not found
[Network.py] nameservers from resolv.conf: [[192, 168, 1, 1]]
[Network] read configured interface: {'eth0': {'dhcp': True}}
[Network] self.ifaces after loading: {'eth0': {'up': True, 'dhcp': True, 'preup': False, 'predown': False, 'dns-nameservers': [], 'ip': [192, 168, 1, 5], 'netmask': [255, 255, 255, 0], 'bcast': [192, 168, 1, 255], 'mac': '00:1d:ec:0e:b0:04', 'gateway': [192, 168, 1, 1]}}
[waitForNetwork] Online, reload interface data
[Network.py] nameservers from resolv.conf: [[192, 168, 1, 1]]
[Network] read configured interface: {'eth0': {'dhcp': True}}
[Network] self.ifaces after loading: {'eth0': {'up': True, 'dhcp': True, 'preup': False, 'predown': False, 'dns-nameservers': [], 'ip': [192, 168, 1, 5], 'netmask': [255, 255, 255, 0], 'bcast': [192, 168, 1, 255], 'mac': '00:1d:ec:0e:b0:04', 'gateway': [192, 168, 1, 1]}}
[eDboxLCD] setLCDBrightness 25
[eDboxLCD] setLCDBrightness 127
[AutoBackup] fallback to default translation for Automatic settings backup
[EPGImportFilter] fallback to default translation for Filter EPGImport data for selected bouquets
Current Picon Path : /media/usb/picon/
[OpenWebif] -D- tuner '0' 'BCM7356 DVB-S2 NIM (internal)' 'Tuner A'
[OpenWebif] -D- tuner '1' 'BCM7356 DVB-S2 NIM (internal)' 'Tuner B'
[OpenWebif] -D- tuner '2' 'Nova-T Stick' 'Tuner C'
[Network] Getting attribute: mac for adapter: eth0
[Network] Getting attribute: dhcp for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: gateway for adapter: eth0
[TIMER] record time changed, start prepare is now: Thu Jan 1 01:59:40 1970
Plugin Extensions/WebInterface failed to load: No module named 'Plugins.Extensions.WebInterface.plugin'
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
[BackupSuite] Unable to initialize MPHelp: No module named 'Plugins.SystemPlugins.MPHelp' - Help not available!
[MovieCut] set language to en
[MovieCut] set language to en
[MovieCut] fallback to default Enigma2 Translation for Execute cuts...
[Opkg] Added to OPKG destinations: /media/hdd
[Opkg] Added to OPKG destinations: /media/usb
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to mount shares again
[VideoHardware] reading preferred modes override, using all video modes
[VideoHardware] getModeList for port DVI-PC
[VideoHardware] remove DVI-PC because of not existing modes
[VideoHardware] getModeList for port Scart
[VideoHardware] getModeList for port Scart
[VideoHardware] getModeList for port DVI
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[VideoHardware] setMode - port: DVI mode: 1080p rate: auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[eInit] + (41) eServiceFactoryMP3
[TIMER] record time changed, start prepare is now: Fri Dec 29 22:32:40 2023
[TimerSanityCheck] Exception - timer does not have to be checked!
[Timer] Record RecordTimerEntry(name=Fratelli di Crozza, begin=Fri Dec 29 22:33:00 2023, serviceref=1:0:19:10E3:3E8:13E:820000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Sat Dec 30 22:37:40 2023
[TimerSanityCheck] Exception - timer does not have to be checked!
[Timer] Record RecordTimerEntry(name=Accordi & disaccordi, begin=Sat Dec 30 22:38:00 2023, serviceref=1:0:19:10E3:3E8:13E:820000:0:0:0:, justplay=0)
[Skin] No skin to read or screen to display.
[Skin] Processing screen '', position=(0, 0), size=(0 x 0) for module 'auto3D'.
[Skin] Processing screen 'SimpleSummary' from list 'auto3D_summary, SimpleSummary', position=(0, 0), size=(132 x 64) for module 'SimpleSummary'.
[Screen] Showing screen '['auto3D_summary', 'SimpleSummary']'.
[Screen] Showing screen 'auto3D'.
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[Avahi] AvahiServiceEntry (null) (_http._tcp) 80
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] Will Register vusolo2 (_http._tcp) on vusolo2:80
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] Registered vusolo2 (_http._tcp) on vusolo2:80
[eEPGCache] setCacheFile read/write epg data from/to '/media/usb/epg.dat'
[eEPGCache] time updated.. start EPG Mainloop
[Skin] Parsing embedded skin ''.
[Skin] Processing screen '', position=(0, 0), size=(1920 x 1080) for module 'Screensaver'.
[Skin] Processing screen 'SecondInfoBar', position=(0, 0), size=(1920 x 1080) for module 'SecondInfoBar'.
[eEPGCache] 5859 events read from /media/usb/epg.dat
[eEPGTransponderDataReader] start Mainloop
[Screen] Showing screen 'SecondInfoBar'.
[Skin] Processing screen 'SecondInfoBarSimple', position=(0, 0), size=(1920 x 1080) for module 'SecondInfoBar'.
[Screen] Showing screen 'SecondInfoBarSimple'.
[Skin] Parsing embedded skin ''.
[Skin] Processing screen '', position=(0, 0), size=(1920 x 7) for module 'HideVBILine'.
[Screen] Showing screen 'HideVBILine'.
[Skin] Processing screen 'ChannelSelection', position=(0, 0), size=(1920 x 1080) for module 'ChannelSelection'.
[ActionMap] Keymap(s) 'InfobarEPGActions' -> Undefined action(s) 'showEventInfoMultiEPG, showInfobarOrEpgWhenInfobarAlreadyVisible'.
[Skin] Processing screen 'RdsInfoDisplay', position=(22, 90), size=(1920 x 300) for module 'RdsInfoDisplay'.
[Skin] Processing screen 'RdsInfoDisplaySummary', position=(0, 0), size=(132 x 64) for module 'RdsInfoDisplaySummary'.
[Screen] Showing screen 'RdsInfoDisplaySummary'.
[Skin] Processing screen 'UnhandledKey', position=(1856, 10), size=(34 x 45) for module 'UnhandledKey'.
[Skin] Processing screen 'VideoMode', position=(127, 67), size=(600 x 75) for module 'VideoMode'.
[Skin] Processing screen 'Dish', position=(30, 90), size=(195 x 303) for module 'Dish'.
[Skin] Processing screen 'BufferIndicator', position=(660, 45), size=(600 x 48) for module 'BufferIndicator'.
[HelpActionMap] removed duplicity: InfobarTimeshiftActions ('seekFwdManual', 'Seek forward (enter time)')
[HelpActionMap] removed duplicity: InfobarTimeshiftActions ('seekBackManual', 'Seek backward (enter time)')
[HelpActionMap] removed duplicity: InfobarSeekActions ('jumpPreviousMark', 'Jump to previous marked position')
[HelpActionMap] removed duplicity: InfobarSeekActions ('jumpNextMark', 'Jump to next marked position')
[Skin] Processing screen 'TimeshiftState', position=(150, 67), size=(1620 x 150) for module 'TimeshiftState'.
[Screen] Warning: Skin is missing element 'speed' in .
[Screen] Warning: Skin is missing element 'statusicon' in .
[Skin] Processing screen 'TimeshiftLive', position=(105, 105), size=(450 x 45) for module 'TimeshiftLive'.
[Skin] Processing screen 'SubtitleDisplay', position=(0, 0), size=(1920 x 1080) for module 'SubtitleDisplay'.
RemovePopup, id = ZapError
[Skin] Processing screen 'InfoBar', position=(0, 0), size=(1920 x 1080) for module 'InfoBar'.
[Screen] Showing screen 'RdsInfoDisplay'.
[Skin] Processing screen 'InfoBarSummary', position=(0, 0), size=(132 x 1) for module 'InfoBarSummary'.
[Screen] Showing screen 'InfoBarSummary'.
[Screen] Showing screen 'TimeshiftState'.
[Screen] Showing screen 'InfoBar'.
[Skin] Processing screen 'Volume', position=(0, 360), size=(30 x 330) for module 'Volume'.
[Screen] Warning: Skin is missing element 'VolumeText' in .
[Skin] Processing screen 'Mute', position=(937, 15), size=(45 x 45) for module 'Mute'.
[Volume] Volume set to 100.
[eDVBVolumecontrol] Setvolume: raw: 100 100, -1db: 0 0
[Skin] Processing screen 'Scart', position=(0, 0), size=(1920 x 1080) for module 'Scart'.
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[Navigation] playing: 1:0:19:452F:30D4:13E:820000:0:0:0:
[Screen] Showing screen 'InfoBar'.
[eDVBServicePlay] timeshift
not pauseable.
setPixmapNum(0) failed! defined pixmaps: {}
[eDVBServicePlay] timeshift
not pauseable.
setPixmapNum(0) failed! defined pixmaps: {}
[eDVBServicePlay] timeshift
not pauseable.
setPixmapNum(0) failed! defined pixmaps: {}
[eDVBServicePlay] timeshift
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
[eDVBResourceManager] allocate channel.. 30d4:013e
[eDVBSatelliteEquipmentControl] SlotID: 0 direct_connected: 1
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] lnb 1 found
[eDVBSatelliteEquipmentControl] sat 130 found
[eDVBSatelliteEquipmentControl] ret0 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] final score 10004
[eDVBSatelliteEquipmentControl] SlotID: 1 direct_connected: 1
[eDVBSatelliteEquipmentControl] lnb 2 found
[eDVBSatelliteEquipmentControl] lnb 3 found
[eDVBSatelliteEquipmentControl] sat 130 found
[eDVBSatelliteEquipmentControl] ret0 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] final score 10004
[eDVBFrontend0] opening frontend
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] SlotID: 0 direct_connected: 1
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] lnb 1 found
[eDVBSatelliteEquipmentControl] sat 130 found
[eDVBSatelliteEquipmentControl] ret0 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] final score 10004
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 1 Freq 11013000 Pol 0 SR 29899000 INV 2 FEC 0 orbpos 130 system 1 modulation 2 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1263 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:452F:30D4:13E:820000:0:0:0:
[CI] Slot 0 plugged
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=0, source=-1 fesource=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[Avahi] watch activated: 0x1
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend0] set static current limiting
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend0] set sequence pos 3
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend0] set sequence pos 4
[Avahi] timeout elapsed
[Avahi] Resolving service 'vusolo2' of type '_e2stream._tcp'
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[eDVBFrontend0] setVoltage 2
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 1
[Avahi] timeout elapsed
[Avahi] Resolving service 'vusolo2' of type '_e2stream._tcp'
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[eDVBFrontend0] sleep 200ms
[Avahi] timeout elapsed
[Avahi] Resolving service 'vusolo2' of type '_e2stream._tcp'
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[eDVBFrontend0] invalidate current switch params
...
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eEPGChannelData] abort non avail schedule other reading
[Skin] Processing screen 'UpdatePlugin', position=(0, 0), size=(1920 x 1080) for module 'UpdatePlugin'.
[Skin] Processing screen 'SimpleSummary' from list 'UpdatePlugin_summary, SimpleSummary', position=(0, 0), size=(132 x 64) for module 'SimpleSummary'.
[Screen] Showing screen '['UpdatePlugin_summary', 'SimpleSummary']'.
[Screen] Showing screen 'UpdatePlugin'.
[SoftwareUpdate] status is: {'8.0-release': {'machines': ['vuultimo4k', 'vusolo4k', 'vuuno4k', 'vuuno4kse', 'vuzero4k', 'vuduo4k', 'vuduo4kse', 'revo4k', 'galaxy4k', 'lunix3-4k', 'lunix4k', 'h9', 'h9se', 'h9combo', 'h9combose', 'h10', 'i55plus', 'i55se', 'hd51', 'hd60', 'vs1500', 'gbquad4k', 'gbue4k', 'e4hd', 'h7', 'multibox', 'sf8008', 'sf8008m', 'gbtrio4k', 'ustym4kpro', 'osmio4k', 'osmio4kplus', 'osmini4k', 'dm8000', 'osmega', 'osmini', 'osminiplus', 'osnino', 'osninoplus', 'osninopro', 'formuler1', 'formuler3', 'formuler4', 'formuler4turbo', 'et7000mini', 'vs1000', 'hd11', 'hd1200', 'hd1265', 'hd1500', 'hd2400', 'hd530c', 'mbmicro', 'mbmicrov2', 'mbtwinplus', 'spycat', 'spycatmini', 'spycatminiplus', 'vuduo2', 'vuduo', 'vusolo2', 'vusolo', 'vusolose', 'vuultimo', 'vuuno', 'vuzero', 'xpeedc', 'fusionhd', 'fusionhdse', 'purehd', 'purehdse', 'et1x000', 'et10000', 'et7x00', 'et8000', 'et8500', 'h3', 'h4', 'h5', 'h6', 'i55', 'alphatriplehd', 'vipercombo', 'vipert2c', 'vipercombohdd', 'viperslim', 'lunix', 'xp1000', 'et4x00', 'et5x00', 'et6x00', 'et9x00', 'hd500c', 'hd1100', 'lc', 'sh1'], 'message': 'You can not do a software update in 8.0-release anymore.\n\nPlease use the Flash option in the menu or flash using an USB stick to upgrade to a newer release.', 'abort': True, 'from': '20000101000000', 'to': '20381231235959'}, '99.99-release': {'machines': ['a', 'b', 'c', 'd'], 'message': 'this is an example\nwith two lines', 'abort': False, 'from': '20000101000000', 'to': '20381231235959'}}
executing opkg --add-dest /media/hdd:/media/hdd --add-dest /media/usb:/media/usb update
[eConsoleAppContainer] Starting /bin/sh
data: Downloading http://downloads.ope...ty/Packages.gz.
Updated source 'openpli-3rd-party'.
Downloading http://downloads.ope...el/Packages.gz.
Updated source 'openpli-3rd-party-mips32el'.
Downloading http://downloads.ope...o2/Packages.gz.
Updated source 'openpli-3rd-party-vusolo2'.
Downloading http://downloads.ope...ll/Packages.gz.
Updated source 'openpli-all'.
Downloading http://downloads.ope...el/Packages.gz.
Updated source 'openpli-mips32el'.
Downloading http://downloads.ope...ns/Packages.gz.
Updated source 'openpli-picons'.
Downloading http://downloads.ope...o2/Packages.gz.
Updated source 'openpli-vusolo2'.

executing opkg --add-dest /media/hdd:/media/hdd --add-dest /media/usb:/media/usb list-upgradable
[eConsoleAppContainer] Starting /bin/sh
data: gstreamer1.0-plugins-bad-rtmp - 1.20.5-r0.109 - 1.20.5-r0.110
libgstmpegts-1.0-0 - 1.20.5-r0.109 - 1.20.5-r0.110
gstreamer1.0-plugins-bad-mpegpsdemux - 1.20.5-r0.109 - 1.20.5-r0.110
gstreamer1.0-plugins-bad-faad - 1.20.5-r0.109 - 1.20.5-r0.110
gstreamer1.0-plugins-bad-opusparse - 1.20.5-r0.109 - 1.20.5-r0.110
libgstisoff-1.0-0 - 1.20.5-r0.109 - 1.20.5-r0.110
libgstcodecparsers-1.0-0 - 1.20.5-r0.109 - 1.20.5-r0.110
gstreamer1.0-plugins-bad-autoconvert - 1.20.5-r0.109 - 1.20.5-r0.110
libgsturidownloader-1.0-0 - 1.20.5-r0.109 - 1.20.5-r0.110
gstreamer1.0-plugins-bad-videoparsersbad - 1.20.5-r0.109 - 1.20.5-r0.110
gstreamer1.0-plugins-bad-mpegtsdemux - 1.20.5-r0.109 - 1.20.5-r0.110
libgstadaptivedemux-1.0-0 - 1.20.5-r0.109 - 1.20.5-r0.110
gstreamer1.0-plugins-bad-dash - 1.20.5-r0.109 - 1.20.5-r0.110
gstreamer1.0-plugins-bad-smoothstreaming - 1.20.5-r0.109 - 1.20.5-r0.110
gstreamer1.0-plugins-bad-hls - 1.20.5-r0.109 - 1.20.5-r0.110

[UpdatePlugin] Trying to fetch time from http://downloads.ope...develop/vusolo2
[UpdatePlugin] Error in get timestamp 'HTTPMessage' object has no attribute 'getdate'
[UpdatePlugin] Trying to fetch time from http://downloads.ope...pli-develop/all
[gRC] main thread is non-idle! display spinner!
[eEPGChannelData] nownext finished(1703551521)
[eEPGChannelData] schedule finished(1703551531)
[eEPGChannelData] stop caching events(1703551531)
[eEPGChannelData] next update in 60 min
[UpdatePlugin] Error in get timestamp 'HTTPMessage' object has no attribute 'getdate'
[UpdatePlugin] Trying to fetch time from http://downloads.ope...evelop/mips32el
[UpdatePlugin] Error in get timestamp 'HTTPMessage' object has no attribute 'getdate'
[Skin] Processing screen 'ChoiceBox', position=(0, 0), size=(1920 x 1080) for module 'ChoiceBox'.
[Skin] Processing screen 'ChoiceBox_summary' from list 'ChoiceBox_summary, SimpleSummary', position=(0, 0), size=(132 x 64) for module 'SimpleSummary'.
[Screen] Showing screen '['ChoiceBox_summary', 'SimpleSummary']'.
[Screen] Showing screen '['ChoiceBox']'.
[eDVBServicePMTHandler] OCready
[eDVBPESReader] ERROR reading PES (fd=71): Value too large for defined data type
[eDVBPESReader] ERROR reading PES (fd=72): Value too large for defined data type
[ActionMap] Keymap 'WizardActions' -> Action = 'down'.
[ActionMap] Keymap 'DirectionActions' -> Unknown action 'downUp'! (Typo in keymap?)
[ActionMap] Keymap 'WizardActions' -> Action = 'down'.
[ActionMap] Keymap 'DirectionActions' -> Unknown action 'downUp'! (Typo in keymap?)
[ActionMap] Keymap 'WizardActions' -> Action = 'down'.
[ActionMap] Keymap 'DirectionActions' -> Unknown action 'downUp'! (Typo in keymap?)
[ActionMap] Keymap 'WizardActions' -> Action = 'ok'.
[Screen] Showing screen '['UpdatePlugin_summary', 'SimpleSummary']'.
[Screen] Showing screen 'UpdatePlugin'.
[Skin] Processing screen 'TextBoxPigLess' from list 'TextBoxPigLess, TextBox', position=(0, 0), size=(1920 x 1080) for module 'TextBox'.
[Skin] Processing screen 'SimpleSummary' from list 'TextBoxPigLess_summary, TextBox_summary, SimpleSummary', position=(0, 0), size=(132 x 64) for module 'SimpleSummary'.
[Screen] Showing screen '['TextBoxPigLess_summary', 'TextBox_summary', 'SimpleSummary']'.
[Screen] Showing screen '['TextBoxPigLess', 'TextBox']'.
[ActionMap] Keymap 'OkCancelActions' -> Action = 'cancel'.
[Screen] Showing screen '['UpdatePlugin_summary', 'SimpleSummary']'.
[Screen] Showing screen 'UpdatePlugin'.
[UpdatePlugin] Trying to fetch time from http://downloads.ope...develop/vusolo2
[UpdatePlugin] Error in get timestamp 'HTTPMessage' object has no attribute 'getdate'
[UpdatePlugin] Trying to fetch time from http://downloads.ope...pli-develop/all
[UpdatePlugin] Error in get timestamp 'HTTPMessage' object has no attribute 'getdate'
[UpdatePlugin] Trying to fetch time from http://downloads.ope...evelop/mips32el
[UpdatePlugin] Error in get timestamp 'HTTPMessage' object has no attribute 'getdate'
[Skin] Processing screen 'ChoiceBox', position=(0, 0), size=(1920 x 1080) for module 'ChoiceBox'.
[Skin] Processing screen 'ChoiceBox_summary' from list 'ChoiceBox_summary, SimpleSummary', position=(0, 0), size=(132 x 64) for module 'SimpleSummary'.
[Screen] Showing screen '['ChoiceBox_summary', 'SimpleSummary']'.
[Screen] Showing screen '['ChoiceBox']'.
[ActionMap] Keymap 'WizardActions' -> Action = 'back'.
[Screen] Showing screen '['UpdatePlugin_summary', 'SimpleSummary']'.
[Screen] Showing screen 'UpdatePlugin'.
[Screen] Showing screen 'InfoBarSummary'.
[ActionMap] Keymap 'InfobarMenuActions' -> Action = 'mainMenu'.
loading mainmenu XML...
[Skin] Processing screen 'menu_mainmenu' from list 'menu_mainmenu, Menu', position=(0, 0), size=(1920 x 1080) for module 'MainMenu'.
[Skin] Processing screen 'MenuSummary', position=(0, 0), size=(16 x 1) for module 'MenuSummary'.
[Screen] Showing screen 'MenuSummary'.
[Screen] Showing screen '['menu_mainmenu', 'Menu']'.
[ActionMap] Keymap 'OkCancelActions' -> Action = 'ok'.
[Skin] Processing screen 'Menu' from list 'menu_shutdown, Menu', position=(0, 0), size=(1920 x 1080) for module 'Menu'.
[Skin] Processing screen 'MenuSummary', position=(0, 0), size=(16 x 1) for module 'MenuSummary'.
[Screen] Showing screen 'MenuSummary'.
[Screen] Showing screen '['menu_shutdown', 'Menu']'.
[ActionMap] Keymap 'OkCancelActions' -> Action = 'ok'.
[eDVBServicePlay] timeshift
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:452F:30D4:13E:820000:0:0:0:
[eDVBCAService] free service 1:0:19:452F:30D4:13E:820000:0:0:0:
[eDVBServicePlay] timeshift
[eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
[eDVBPCR0] DEMUX_STOP ok
[eDVBPCR0] destroy
[eDVBVideo0] DEMUX_STOP ok
[eDVBVideo0] VIDEO_STOP ok
[eDVBVideo0] destroy
[eDVBAudio0] AUDIO_STOP ok
[eDVBAudio0] DEMUX_STOP ok
[eDVBAudio0] AUDIO_CONTINUE ok
[eDVBAudio0] destroy
[eDVBText0] DEMUX_STOP ok
[eDVBText0] destroy
[eDVBResourceManager] start release channel timer
[Skin] Processing screen 'QuitMainloopScreen', position=(0, 0), size=(1920 x 1080) for module 'QuitMainloopScreen'.
[Screen] Showing screen 'QuitMainloopScreen'.
[Skin] Parsing embedded skin ''.
[Skin] Processing screen '', position=(0, 0), size=(0 x 0) for module 'TryQuitMainloop'.
[Skin] Processing screen 'SimpleSummary' from list 'TryQuitMainloop_summary, SimpleSummary', position=(0, 0), size=(132 x 64) for module 'SimpleSummary'.
[Screen] Showing screen '['TryQuitMainloop_summary', 'SimpleSummary']'.
[Screen] Showing screen 'TryQuitMainloop'.
[eDVBDB] ---- saving lame channel db
[eDVBDB] saved 476 channels and 6318 services!
[eDVBResourceManager] release cached channel (timer timeout)
[eDVBLocalTimerHandler] remove channel 0x1623668
[eEPGTransponderDataReader] remove channel 0x1623668
[eDVBResourceManager] stop release channel timer
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_watch_free
[Avahi] avahi_timeout_update
[Avahi] avahi_timeout_free
[eEPGCache] store epg to realpath '/media/usb/epg.dat'
[eEPGCache] 6031 events written to /media/usb/epg.dat
[eDVBLocalTimeHandler] set RTC to previous valid time
[eInit] - (41) Stream server
[eInit] - (41) Encoders
[eInit] - (41) eServiceFactoryDVB
[eInit] - (41) eServiceFactoryFS
[eInit] - (41) eServiceFactoryM2TS
[eInit] - (41) eServiceFactoryHDMI
[eInit] - (41) eServiceFactoryTS
[eInit] - (41) eServiceFactoryWebTS
[eInit] - (41) eServiceFactoryDVD
[eInit] - (41) eServiceFactoryMP3
[eInit] - (40) eServiceCenter
[eInit] - (35) CA handler
[eInit] - (35) CI Slots
[eInit] - (30) eActionMap
[eInit] - (22) Hdmi CEC driver
[eInit] - (21) input device driver
[eInit] - (20) AVSwitch Driver
[eInit] - (20) misc options
[eInit] - (20) RC Input layer
[eInit] - (20) UHF Modulator
[eInit] - (20) DVB-CI UI
[eInit] - (15) eWindowStyleManager
[eInit] - (10) gRC
[gRC] waiting for gRC thread shutdown
[gRC] thread has finished
[eInit] - (9) Font Render Class
[eInit] - (9) gLCD
[eInit] - (9) GFBDC
[eInit] - (8) graphics acceleration manager
[eInit] - (5) Tuxtxt
[eInit] - (1) Background File Eraser
[eInit] reached rl -1
[MAIN] executing main
TuxTxt service started 23b
TuxTxt running thread...(23b)
TuxTxt stopped service 23b

[Dimitrij]

VeryClear

test

openPli 8.0 add  modified /usr/lib/enigma2/python/Screens/SoftwareUpdate.py

Save the old file SoftwareUpdate.pyо

 

[littlesat]

What did you change dimitrij?

[Dimitrij]

What did you change dimitrij?

post 23

[littlesat]

I'm afraid just adding the timeout does not help... Seems in the new python 3 getdate does not exist or something like that. 

[VeryClear]

So, no need to try what Dimitrij suggested?

[littlesat]

Please try what Dimar suggested.... better than wait for new builds.

[VeryClear]

Ok, just flashed v8 but wasn't there an attached file in Dimitrij's post? Not seeing it any more.

[boolean]

littlesat already made the appropriate changes and also changed "getdate" to "get". I'm guessing the next nightly will contain this change, which should be finished around 27-12-2023 08:03 UTC.

[Dimitrij]

it not work

>>> url = 'http://downloads.openpli.org/feeds/openpli-develop/all'
>>> data = urlopen("%s/Packages.gz" % url, timeout=1).info().get('Last-Modified')
>>> data
'Wed, 27 Dec 2023 08:48:12 GMT'
data - altzone

Edited by Dimitrij, 27 December 2023 - 11:20.

[Tech]

Build fails with the latest commit https://github.com/O...job/19977511168

 

You need to install an extra package by CLi 'opkg install enigma-info'

[Dimitrij]

Maybe simple(return data)?

>>> url = 'http://downloads.openpli.org/feeds/openpli-develop/all'
>>> data = urlopen("%s/Packages.gz" % url, timeout=1).info().get('Last-Modified')
>>> data
'Wed, 27 Dec 2023 08:48:12 GMT'
return data

 

[littlesat]

What does not work at the getdata? I do not experience it here..... 

[Dimitrij]

What does not work at the getdata? I do not experience it here..... 

This https://github.com/O...56e87353d55411b not work

[littlesat]

Wierd here it works as a charm…

Edited by littlesat, 27 December 2023 - 17:39.

[Dimitrij]

Wierd here it works as a charm…

message = _("Do you want to update your receiver?") + "\n"

or

message = _("Do you want to update your receiver to %s?") % latestImageTimestamp + "\n"

					latestImageTimestamp = self.getLatestImageTimestamp()
					if latestImageTimestamp:
						message = _("Do you want to update your receiver to %s?") % latestImageTimestamp + "\n"
					else:
						message = _("Do you want to update your receiver?") + "\n"
					message += "(" + (ngettext("%s updated package available", "%s updated packages available", self.total_packages) % self.total_packages) + ")"