https://n4k.sourceforge.io//3.2/
Neutrino Images.
I need some help. Which file to download and how to install?
Posted 22 December 2023 - 19:48
https://n4k.sourceforge.io//3.2/
Neutrino Images.
I need some help. Which file to download and how to install?
Posted 23 December 2023 - 01:41
This is now 7.3
It works according to your information.
switch to Version 9.0
But you see the path of the firmware.
The firmware can be easily replaced by overwriting it with ftp and then rebooting.
Reboot.
A more recent version of the firmware may work.
original Source
https://github.com/e...master/availink
Upddated Source
https://github.com/a...df75a1/availink
or zip
https://github.com/a...1_1.8.29209.zip
Posted 23 December 2023 - 12:02
This is now 7.3
It works according to your information.
switch to Version 9.0
But you see the path of the firmware.
The firmware can be easily replaced by overwriting it with ftp and then rebooting.
Reboot.
A more recent version of the firmware may work.
original Source
https://github.com/e...master/availink
Upddated Sourcehttps://github.com/a...df75a1/availink
or zip
Hi.
It's working, the updaeted source!!! I replaced those files in /lib/firmware/avalink using WInSCP
The 9°E 12466V 16APSK 419502/3 PLS Gold 262140 Multistream Stream 12 OPENPLI 9 is now working. After several hours when I turned ON the receiver all the channels are now working on that frequency. No more "Tune failed". Now I will copy my channels list from OPENPLI 7.3. to OPENPLI 9 so I can make further tests.
Now I have one question, if the driver will work on all SAT like is now working on that frequency, after new updates, the driver I manulay copied, will still work on OPENPLI 9? Or I will have to copy those files after every new update?
Posted 23 December 2023 - 12:18
Next step is update the BSP in develop, and if that still works, see if we can get it backported to 9.0-release, which might be a challenge as there been quite a few changes to the BSP in the last days...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 23 December 2023 - 15:53
Next step is update the BSP in develop, and if that still works, see if we can get it backported to 9.0-release, which might be a challenge as there been quite a few changes to the BSP in the last days...
It's not a problem.
You could add the updated firmware as a patch in version 9.
In any case, it's good to know that it wasn't the driver, but just the firmware of the tuner used.
Posted 24 December 2023 - 12:43
Until now all is working OK. I have installed all what I need (multistalker included). The only sat I have to test with high SR is 80°E but now I can't because some days ago some workers went on the roof and accidently they moved my antenna. I have to wait the technician to fix the problem. Right now I reach only 55°E and 14°W instead 80°E - 45°W. Some years ago I reached 61°W (this is maximum from my position) there was a Venezuelan channel, but this is history… 80°E is also a maximum due to a hill, otherwise 90°E will be my maximum.
For me it will be the best solution to include in the OPENPLI 9 the driver that is working fine. I hope also for other users will be OK.
Thank you again for all your help!
Posted 24 December 2023 - 14:04
Thank you very much for your feedback.
It was updated for the Develop (nightly build.
This can also be easily transferred to version 9 and version 8.3 via CherryPick.
Once the restructuring in the BSP layers has been completed, you can also assign the firmware there correctly in terms of version.
But the version number is more cosmetic.
The main thing is functionality.
Posted 26 December 2023 - 17:07
New open source frontend driver Repository: https://github.com/edision-open/dvb-frontends-avl62x1+
blindscan source
https://github.com/e...-open/blindscan
Is it possible to adjust the tuning range to start at 10490 MHz?
https://www.lyngsat....am_10492-H.html
https://flysat.com/e...llite/es-hail-2
Posted 27 December 2023 - 11:16
Is it possible to adjust the tuning range to start at 10490 MHz?
Plugin blindscan
self.Ku_band_freq_limits = {"low": 10700, "high": 12750} self.universal_lo_freq = {"low": 9750, "high": 10600} self.c_band_freq_limits = {"low": 3000, "high": 4200, "default_low": 3400, "default_high": 4200}
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Posted 30 January 2024 - 12:10
A possible solution that is recommended is to try to replace the avl6261.ko file with an older version and check again. For this contact the OPENPLI forum in order to inform you further.
Also it is highly advisable to report this issue to the developers of the OPENPLI image that you are using, in order to investigate it further and fix this issue probably in any new update.
currently there should be 6 working versions of avl6261.ko available (solving SR and FREQ range) and 2 version firmware (solution processing modes)
avl6261ko.zip 1.27MB 10 downloads
Edited by EnoSat, 30 January 2024 - 12:14.
Posted 30 January 2024 - 14:45
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Posted 30 January 2024 - 14:48
Why is an OE-A commit relevant? We never had this update in our BSP, so no need for a revert.
https://github.com/O...1.8.27679.bb#L7
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 30 January 2024 - 17:53
Are you sure? The last time Edision updated the BSP was 3 years ago.
Someone committed somethng in OE that bypasses or overrides the BSP (which would be very bad)?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Kriege Sendersuchlauf nicht mehr hin ...Started by meierblom, 18 Mar 2024 sendersuchlauf, tuner |
|
|||
Tuner settingsStarted by Bloe, 18 Mar 2021 Monoblock, Switch, Singel lnb and 2 more... |
|
|||
Multistream t2 mi Yamai 55 oost probleemStarted by Phoenixx, 14 Mar 2021 Multistream, tuner, yamai |
|
|||
Tuner lijkt te verdwijnen op ET6500Started by argearge1, 9 Jan 2021 tuner |
|
|||
Plugin - Ability to retrieve NIB tuner configuration settings?Started by LoveMyDish, 4 Nov 2019 plugins, tuner |
|
0 members, 15 guests, 0 anonymous users