I installed the latest development nightly update this morning, and now my Ultimo is stuck on the Merry Christmas page.
Any suggestions as to what the easiest fix is?
Problem with Nightly development build for VU Ultimo 4K
Started by dog-man, 27 Dec 2023 12:43
10 replies to this topic
Re: Problem with Nightly development build for VU Ultimo 4K #2
-
- Senior Member
- 419 posts
+2
Neutral
Posted 27 December 2023 - 13:12
I just checked and can still use DCC to access the receiver, if that helps with an easy fix?
Re: Problem with Nightly development build for VU Ultimo 4K #3
-
- PLi® Core member
- 13,764 posts
+214
Excellent
Posted 27 December 2023 - 13:35
you must install via telnet enigma-info package
init 4 opkg install enigma-info init 3
Kdo nic nedělá, nic nezkazí!
Re: Problem with Nightly development build for VU Ultimo 4K #4
-
- Senior Member
- 419 posts
+2
Neutral
Posted 27 December 2023 - 14:09
you must install via telnet enigma-info package
init 4 opkg install enigma-info init 3
Thank you, I will give it a try and report back.
Re: Problem with Nightly development build for VU Ultimo 4K #5
-
- Senior Member
- 419 posts
+2
Neutral
Posted 27 December 2023 - 14:29
Seems to be working normally again after doing the above.
Thank you.
Re: Problem with Nightly development build for VU Ultimo 4K #6
-
- Forum Moderator
PLi® Core member - 14,890 posts
+485
Excellent
Posted 27 December 2023 - 17:43
This issue will be solved after the next develop build which will be finished in a few hours 
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the 
button on the buttom right of this message
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Re: Problem with Nightly development build for VU Ultimo 4K #7
-
- PLi® Core member
- 57,063 posts
+698
Excellent
Posted 27 December 2023 - 17:54
This is the risk with using develop. A dependency for the enigma.info file was missing.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: Problem with Nightly development build for VU Ultimo 4K #8
-
- PLi® Core member
- 70,223 posts
+1,798
Excellent
Posted 27 December 2023 - 19:00
This issue will be solved after the next develop build which will be finished in a few hours
Indeed it is best to wait, as not all enigma-info packages have been build yet, and some are a few days old and not complete.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Problem with Nightly development build for VU Ultimo 4K #9
-
- Senior Member
- 605 posts
+3
Neutral
Posted 27 December 2023 - 20:43
This issue will be solved after the next develop build which will be finished in a few hours
Issue not solved.
Re: Problem with Nightly development build for VU Ultimo 4K #10
-
- PLi® Contributor
- 6,165 posts
+261
Excellent
Posted 27 December 2023 - 20:46
You have to wait a rebuild of all the package for all the STB is still running.
I have the issue too on a Zgemma H.10 and the package enigma-info is not yet available, so I flash the 9.0 Release to watch TV.
There is always a risk with Nightly Build, that's release version exists.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: Problem with Nightly development build for VU Ultimo 4K #11
-
- Senior Member
- 605 posts
+3
Neutral
Posted 27 December 2023 - 20:50
No problems i wait.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
