26 replies to this topic

[maelkid2015]

Hello, Everyone Happy New Year firstly:)

 

I am new at this forum and hope i can find any solution here from you guys.

 

I have a zegmma H7S and dish satellite with 3-4 multi receivers frequency. 

 

My problem is that i cant connect or open "Open Webif" with my pc

 

I don't know much about these this and i wanted some help how to connect and how to use it...also to connect it with IPTV.

 

Thanks in advance

[WanWizard]

If you have configured the network of your box correctly, and have connected it, then the IP address of your box will be visible on the box, in Information, About.

 

Just type this address in your browser.

[WanWizard]

Moved this question to the English language forum.

[maelkid2015]

If you have configured the network of your box correctly, and have connected it, then the IP address of your box will be visible on the box, in Information, About.

 

Just type this address in your browser.

I haven't done nothing . I was part of one year subscription for watching, and everything is controlled from them , but lately they are not serious and i want to control it myself. I googled and it was possible. What if i turn to factory mode the box? Can you provide me other steps or any video please?

[WanWizard]

Perhaps start with looking at our wiki : https://wiki.openpli.org, which has lots of information and screen shots.

 

As to the "watching" bit, you had an illegal subscription, nobody here can help you with that, it is against the forum rules.

[Pr2]

Illegal providers tend to lock down the box by disabling access to it (so no telnet, no ssh, no ftp and perhaps no OpenWebif).

If you decide to reflash your box with OpenPLi image, be careful that you will lost your illegal subscription.

If you box support multiboot then flash OpenPLi in another slot so you can start learning how to use it.

[maelkid2015]

Hello

 

Can't I send any pic so you can provide more information plz?

[piplan1966]

Hi
You can also send the program link,
You click on more reply option then click on choose file then attach file then click on submit

[Pr2]

Click on the More Reply Options to be able to attach pictures to your message on this forum.

[maelkid2015]

Hello again,

 

Hope you can help me with my videos and pics

 

Regards and thanks

Attached Files

•  WhatsApp Video 2024-01-09 at 10.10.32 PM.mp4   3.21MB   5 downloads
•  WhatsApp Video 2024-01-09 at 10.17.50 PM.mp4   4.51MB   2 downloads
•  whats 3.jpg   84.61KB   1 downloads
•  zegma1.jpg   84.61KB   1 downloads
•  zegma2.jpg   80.75KB   1 downloads
•  zegma3.jpg   90.02KB   1 downloads

[s3n0]

Hi.

 

Does your desktop PC contain Windows or Linux ? You can handle Linux easily. With Windows, it's a bit more complicated, since it's a "picture book" and not an operating system.

 

I mean testing the connection with the help of the ping command, which is probably the first step. Of course you have to be sure of the correct IP address and you have to have your set-top box and PC in the same LAN sub-network (the home network should be OK though).

 

Then test the open ports of the set-top box - remotely. You can use a port scanner for Windows, but AV systems may report it as a dangerous tool. Download and use for example PortQRY: https://ss64.com/nt/portqry.html

 

If it is not a third-party OpenPLi, you should also be able to edit, or disable / enable, the password for OpenWebif as well as the OpenWebif web-server itself, directly in the GUI of your OpenPLi, so try to find it there and enable it if it is disabled. Then also verify the password for OpenWebif.

 

When you try to connect via a web-browser, what error exactly does the browser write ? Does it write any error at all ?

 

And which web-browser are you using ? Have you tried more web-browsers to connect to OpenWebif or just one ?

Edited by s3n0, 10 January 2024 - 10:01.

[WanWizard]

The screenshots say the IP of the box is 192.168.1.40, and there is an active network connection.

 

So http://192.168.1.40 in the browser should work, unless this is not a genuine OpenPLi but a modified one, in which case all bets are on.

[s3n0]

Yes... but that doesn't mean that OpenWebif doesn't work or is uninstalled. We still don't know if it is possible to connect to the set-top box, for example, through a terminal (Telnet / SSH) and find out if OpenWebif is installed. If it is not possible to do connect through the terminal, then it would be good to test all opened ports. Propably... this OpenWebif is on a different port than the standard 80. If OpenWebif is installed, then it should only be enough to modify its settings via the GUI MENU. I don't know what to think about it, I'm just trying to help .

[WanWizard]

It is installed (see the screenshot of the plugins), but the code could be modified.

 

If it is running on https, and/or on a non-standard port, you could see that in the OpenWebif config, by selecting it in the plugin screen and pressing OK.

[maelkid2015]

Hi

 

The guy which i had the deal, could easily enter from my pc at home and also from his home pc with team viewer .

 

This box is controlled from the guy i had deal, he can make me possible to stop watching satellite channels, iptv and all downloaded movies as well.

 

Do i have any solution to be independent from him? 

 

Thank you everyone for your answer, I really appreciate it:) 

[Pr2]

Illegal providers tend to lock down the box by disabling access to it (so no telnet, no ssh, no ftp and perhaps no OpenWebif).

If you decide to reflash your box with OpenPLi image, be careful that you will lost your illegal subscription.

If you box support multiboot then flash OpenPLi in another slot so you can start learning how to use it.

[WanWizard]

Chances are that your illegal subscription will end as soon as "the guy" detects you've been fiddling with it.

 

If that doesn't bother you:

 

Get a USB stick or other storage device, and plug it in. Then go to the autobackup menu, select the USB device, and make a manual backup. Zip the backup, and see if someone here is willing to go through it to remove everything non-standard.

 

When done, do what Pr2 suggests, and flash OpenPLi 9.0 into a free multiboot slot (via de flash image menu option). When done, plug the USB stick with the modified backup in, and boot the newly flashed slot. When prompted for a restore of the backup, select yes.

[Pr2]

I guess he should install backsuite and create a backup of its current image as-is with it, so he will perhaps be able to restore it in a multiboot slot when enabled on its box.

But not sure if BackupSuite allows this but at least he should be able to reinstall its current "protected" image.

[WanWizard]

I don't think that is useful or needed. Flashing another slot doesn't affect the current installation, and you can't extract parts of the config from a backupsuite backup, which is what is required here to get a standard setup without losing config.

[maelkid2015]

Everyone thanks for replying my questions and helping me:)

 

I could open as its on pic , any help how can i control myself everything? Adding other canals or removing? 

 

I have l list of downloaded movies shown at other pic, also there are movies downloaded and translated from Italian to Albanian and from English to Albanian, any way to download or find with eng subtitles or french?

 

I have no idea how they are controlling this thing or download thousands of movies and putting in a list:( I am saying this cuz they are over 55 and have no background in technology and am sure about this

 

Thanks again for your help:)  

Attached Files

•  c6a693b0-02f1-409b-abbc-f0774efb5c17.jpg   56.47KB   0 downloads
•  filma.jpg   79.01KB   0 downloads