32 replies to this topic

[WanWizard]

That is only from the recovery image, on the image itself you can flash any version ?

[satmario]

since yesterday's openpli 9 update

backup can be restored via backupsuite.

I am dealing with a different problem.

Every month I do a full Octagon backup via backupsuite.

Restoring backups works fine, but none can be updated.

Every attempt to update the software ends in a system crash.

Can you please advise where the problem is?

 

##############################################

Traceback (most recent call last):

  File "/usr/lib/enigma2/python/Screens/SoftwareUpdate.py", line 146, in checkTraficLight

  File "/usr/lib/enigma2/python/StartEnigma.py", line 302, in openWithCallback

    dlg = self.open(screen, *arguments, **kwargs)

  File "/usr/lib/enigma2/python/StartEnigma.py", line 312, in open

    dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)

  File "/usr/lib/enigma2/python/StartEnigma.py", line 255, in instantiateDialog

    return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)

  File "/usr/lib/enigma2/python/StartEnigma.py", line 279, in doInstantiateDialog

    dlg.applySkin()

  File "/usr/lib/enigma2/python/Screens/Screen.py", line 240, in applySkin

  File "/usr/lib/enigma2/python/Screens/Screen.py", line 253, in createGUIScreen

  File "/usr/lib/enigma2/python/Components/GUIComponent.py", line 106, in GUIcreate

  File "/usr/lib/enigma2/python/Components/VariableText.py", line 24, in postWidgetCreate

TypeError: in method 'eLabel_setText', argument 2 of type 'std::string const &'

[ePyObject] (CallObject(<bound method MessageBox.left of <class 'Screens.MessageBox.MessageBox'>(Due to a driver issue it is possible the box will no longer start after an update.

Flashing the new image is not a problem, and neither is upgrading to 9.0-release.

 

Chcete zaktualizovat Váš přijímač?)>,()) failed)

 

 

dmesg

 

<4>[hi_dvb_ca_ioctl,609] detach descrambler fail

<6>[iframe_confirm:190] iframe confirm

<6>

<4>Enter DMX_OsiPcrChannelDetachSync 0 0

<6>[iframe_finish:208] iframe finish

<6>

<4>video[0] ready to play

<4>DmxPcrAcquire 0 -1073056816

<4>Enter DMX_OsiPcrChannelAttachSync 0 0 4325376

<4>[08:28:19:710 ERROR-HI_VPSS]:HI_DRV_VPSS_RelPortFrame[520]:Port = 0 RelPortFrame 467 Failed

<4>@si2166_i2c_gate_ctrl

<4>@si2166_i2c_gate_ctrl

<4>@OPS diseqc tone = 0(22K-OFF)

<4>@si2166_diseqc_set_voltage OFF

<4>@OPS diseqc tone = 0(22K-OFF)

<4>@si2166_diseqc_set_voltage OFF

<4>[1;32mdvb video add event 17 - 7 0

<4>[m

<4>proc_vmpeg_0_dst_apply_write 00000001

<4>

<4>stStdTiming[h:1280, v:1024]

<4>stStdTiming[h:1600, v:900]

<4>stStdTiming[h:1152, v:864]

<4>stStdTiming[h:1680, v:1050]

<4>stStdTiming[h:1280, v:1024]

<4>stStdTiming[h:1600, v:900]

<4>stStdTiming[h:1152, v:864]

<4>stStdTiming[h:1680, v:1050]

<4>stStdTiming[h:1280, v:1024]

<4>stStdTiming[h:1600, v:900]

<4>stStdTiming[h:1152, v:864]

<4>stStdTiming[h:1680, v:1050]

<4>FAT-fs (mmcblk0p3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

<4>proc_vmpeg_0_dst_apply_write 1

<4>proc_vmpeg_0_dst_apply_write 1

<4>bestfit

<4>wol offpanscan

<4>panscan

<4>panscan

<4>panscan

<4>proc_video_videomode_50hz_write [1080i50]

<4>proc_video_videomode_60hz_write [1080i]

<4>proc_video_videomode_24hz_write [1080p24]

<4>panscan

<4>@si2166_i2c_gate_ctrl

<4>@si2166_i2c_gate_ctrl

<4>@OPS diseqc tone = 0(22K-OFF)

<4>@si2166_diseqc_set_voltage OFF

<4>hi_dvb_set_source [dmx: 0, tuner: 0, isvtuner: 0]

<6>[hi_dvb_attach_tsport:740 dmx 0,port 32]0 5 1 0 184

<4>@si2166_diseqc_set_voltage 18V(HORIZONTAL)

<4>send discq: E0 00 00 01 C4 A2, len:3

<4>send discq: E0 00 03 01 14 A3, len:3

<4>send discq: E0 10 39 F0 44 B3, len:4

<4>@OPS diseqc tone = 1(22K-ON)

<4>si2166_set_frontend [frequency:1744000,symbol_rate:29900000,is_id:255,pls_code:262143,pls_mode:3,isdbt_sb_segment_idx:0x00000000]

<4>si2166_set_frontend [stream_id:0xffffffff]

<4>fPLL_MHz 0, LPF_KHz 30400

<4>Filter_bw_control_bit = 24

<4>fPLL_MHz 1744, LPF_KHz 30400

<4>Filter_bw_control_bit = 24

<4>si2166_set_frontend end at 1744000 took 105 ms

<4>Enter DMX_OsiPcrChannelDetachSync 0 0

<4>******************************************VIDEO_GET_FRAME_RATE 25

<4>DmxPcrAcquire 0 -1073056816

<4>Enter DMX_OsiPcrChannelAttachSync 0 0 4325376

<4>audio[0] ready to play

<4>Enter DMX_OsiPcrChannelDetachSync 0 0

<4>DmxPcrAcquire 0 -1073056816

<4>Enter DMX_OsiPcrChannelAttachSync 0 0 4325376

<4>video[0] ready to play

<6>[1;32mdvb video add event 2 - 25 0 30 0

<6>[m

<6>[1;32mdvb video add event 16 - 0 1

<6>[m[1;32mdvb video add event 17 - 7 0

<4>[m

<4>[08:28:32:870 ERROR-HI_VPSS]:HI_DRV_VPSS_RelPortFrame[520]:Port = 0 RelPortFrame 1 Failed

<6>[1;32mdvb video add event 16 - 1 0

<6>[m

<6>[1;32mdvb video add event 2 - 30 0 25 0

<6>[m[08:28:34:615 ERROR-HI_DEMUX]:DescKeyDetach[332]:Channel 5 has not attached any descrambler

<4>[hi_dvb_ca_ioctl,417] detach descrambler fail

<4>proc_vmpeg_0_dst_apply_write 00000001

<4>

<4>proc_vmpeg_0_dst_apply_write 00000001

<4>

<4>proc_vmpeg_0_dst_apply_write 00000001

<4>

<4>proc_vmpeg_0_dst_apply_write 00000001

<4>

<4>proc_vmpeg_0_dst_apply_write 00000001

<4>

<4>proc_vmpeg_0_dst_apply_write 00000001

<4>

<4>proc_vmpeg_0_dst_apply_write 00000001

<4>

<4>proc_vmpeg_0_dst_apply_write 00000001

<4>

<4>Enter DMX_OsiPcrChannelDetachSync 0 0

<4>proc_vmpeg_0_dst_apply_write 00000001

<4>

<4>[hi_dvb_ca_ioctl,609] detach descrambler fail

<4>[hi_dvb_ca_ioctl,609] detach descrambler fail

<4>[hi_dvb_ca_ioctl,609] detach descrambler fail

<4>video[0] ready to play

<6>[iframe_confirm:190] iframe confirm

<6>

<6>[iframe_finish:208] iframe finish

<6>

<4>@si2166_i2c_gate_ctrl

<4>@si2166_i2c_gate_ctrl

<4>@OPS diseqc tone = 0(22K-OFF)

<4>@si2166_diseqc_set_voltage OFF

<4>@OPS diseqc tone = 0(22K-OFF)

<4>@si2166_diseqc_set_voltage OFF

<4>[1;32mdvb video add event 17 - 7 0

<4>[m

<4>proc_vmpeg_0_dst_apply_write 00000001

<4>

<4>stStdTiming[h:1280, v:1024]

<4>stStdTiming[h:1600, v:900]

<4>stStdTiming[h:1152, v:864]

<4>stStdTiming[h:1680, v:1050]

<4>stStdTiming[h:1280, v:1024]

<4>stStdTiming[h:1600, v:900]

<4>stStdTiming[h:1152, v:864]

<4>stStdTiming[h:1680, v:1050]

<4>stStdTiming[h:1280, v:1024]

<4>stStdTiming[h:1600, v:900]

<4>stStdTiming[h:1152, v:864]

<4>stStdTiming[h:1680, v:1050]

<4>FAT-fs (mmcblk0p3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

<4>proc_vmpeg_0_dst_apply_write 1

<4>proc_vmpeg_0_dst_apply_write 1

<4>bestfit

<4>wol offpanscan

<4>panscan

<4>panscan

<4>panscan

<4>proc_video_videomode_50hz_write [1080i50]

<4>proc_video_videomode_60hz_write [1080i]

<4>proc_video_videomode_24hz_write [1080p24]

<4>panscan

<4>@si2166_i2c_gate_ctrl

<4>@si2166_i2c_gate_ctrl

<4>@OPS diseqc tone = 0(22K-OFF)

<4>@si2166_diseqc_set_voltage OFF

<4>hi_dvb_set_source [dmx: 0, tuner: 0, isvtuner: 0]

<6>[hi_dvb_attach_tsport:740 dmx 0,port 32]0 5 1 0 184

<4>@si2166_diseqc_set_voltage 18V(HORIZONTAL)

<4>send discq: E0 00 00 00 44 E5, len:3

<4>send discq: E0 00 03 00 94 E5, len:3

<4>send discq: E0 10 39 F0 E4 E5, len:4

<4>@OPS diseqc tone = 1(22K-ON)

<4>si2166_set_frontend [frequency:1744000,symbol_rate:29900000,is_id:255,pls_code:262143,pls_mode:3,isdbt_sb_segment_idx:0x00000000]

<4>si2166_set_frontend [stream_id:0xffffffff]

<4>fPLL_MHz 0, LPF_KHz 30400

<4>Filter_bw_control_bit = 24

<4>fPLL_MHz 1744, LPF_KHz 30400

<4>Filter_bw_control_bit = 24

<4>si2166_set_frontend end at 1744000 took 100 ms

<4>******************************************VIDEO_GET_FRAME_RATE 0

<4>DmxPcrAcquire 0 -1073056816

<4>Enter DMX_OsiPcrChannelAttachSync 0 0 4325376

<4>audio[0] ready to play

<4>Enter DMX_OsiPcrChannelDetachSync 0 0

<4>DmxPcrAcquire 0 -1073056816

<4>Enter DMX_OsiPcrChannelAttachSync 0 0 4325376

<4>video[0] ready to play

<6>[1;32mdvb video add event 1 - 0 0 1920 1080

<6>[m

<6>[1;32mdvb video add event 2 - 0 0 30 0

<6>[m[1;32mdvb video add event 16 - 0 1

<6>[m[1;32mdvb video add event 17 - 7 0

<6>[m

<4>[hi_dvb_ca_ioctl,417] detach descrambler fail

<4>[08:35:54:304 ERROR-HI_VPSS]:HI_DRV_VPSS_RelPortFrame[520]:Port = 0 RelPortFrame 1 Failed

<6>[1;32mdvb video add event 2 - 30 0 25 0

<6>[m

<6>[1;32mdvb video add event 16 - 1 0

<6>[mproc_vmpeg_0_dst_apply_write 00000001

<4>

<4>proc_vmpeg_0_dst_apply_write 00000001

<4>

<4>proc_vmpeg_0_dst_apply_write 00000001

<4>

 

[satmario]

I use openpli in all boxes since 2019.

I don't remember as many updates as in recent years.

Somewhere there will be an error that continues with many updates.

[WanWizard]

There are hardly ever any updates in an OpenPLi release image.

 

There is a warning out for updates, and appearently that code has not been checked or tested for a while, so the problem is rather the lack of an update .

 

So this needs looking at.

[satmario]

I've never had a problem with an update even though a 2 month old backup was pulled.

This version is December 2023

Even if I use backup image openpli January 2024 same problem.

Green screen

​

[WanWizard]

It has nothing to do with updates, or the update mechanism.

 

OpenPLi has a built-in warning system, where we can enable warnings for certain boxes and/or releases, to inform users not to update if there are issues, via a json file on our website.

 

A warning has been enabled for the SF8008, which might hang after an update due to a driver update issue. It is this enabling that is causing the green screen on both 8.3-release and 9.0-release.

 

I don't know what is causing the problem, and how to fix it, as I am not a Python developer. I've passed the issue on so it can be looked at.

 

In general, there is no need to ever update a release image, as the image itself hardly ever has updates. An update is only needed for stuff like picons, channel lists, or if you use the transponder xml for scanning.

[satmario]

Thank you very much for the information friend and passing the problem on

​

[fatmate]

Just to prevent the crash (Green Screen) :
 

1- Download the file  : https://raw.githubus...VariableText.py

 

2- Change line-11:
     From : self.message = text
     To      : self.message = str(text)

 

3- Copy the file to : /usr/lib/enigma2/python/Components/

 

4- Restart GUI.
 
Result: There will be no crash and a proper message will be shown.

[littlesat]

Yes that is a solution…. But it is kind of egg/chicken…. And maybe better to and easier to flash 9.0 as you still can get the thing with the driver. Maybe we can consider to adapt here but then still a reflash is needed

Edited by littlesat, 24 January 2024 - 22:39.

[fatmate]

I'm sure PLi Team has the proper solution, but that was a temporary approach for me on both version.

 

Image : OpenPLi 8.3-release

Build Date : 2024-01-17

Tested on : Octagon SF8008

 

And, for v9.0, it is line-10 in : https://gitlab.openp...VariableText.py

[littlesat]

There was also a minor update from python involved here that causes a chicken/egg syndrome. That is naughty!

Edited by littlesat, 24 January 2024 - 22:43.

[WanWizard]

This is the correct fix: https://github.com/O...c9e3892fb9761e1

 

The problem exists because of a bug in the Python 2.7 version used in 8.3-release, in which json.load() returns a unicode string instead of standard string ( in python 3 terms, it returns str instead bytes ). This bug was not present in earlier versions, and corrected in later ones.

 

You can also fix it by updating on the commandline:

opkg update && opkg upgrade

or to flash the current 8.3-release with a backup/restore.

 

The change in VariableText is a hack, the problem should be fixed at source. Besides that, in Pyhton 3 str() won't work, as you need to encode/decode between str and bytes.

 

And downloading the develop version of the py and installing it in 8.3-release is very bad advice, that could lead to all kinds of trouble.

Edited by WanWizard, 25 January 2024 - 14:25.
correct typo

[Pr2]

You should use, there is a small typo in WanWizard answer:

opkg update && opkg upgrade