39 replies to this topic

[Pastoman]

Hi, I have a uClan USTYM 4K PRO receiver and after uploading openpli9 (25.2.20234) only the second tuner (DVB-T2/C) is detected and the DVB-S2X tuner is not available.

 

 20240228091507.jpg   45.98KB   3 downloads 

 

Maybe is needed to update the drivers in the image, because I have a new revision of this receiver (motherboard like the SF8008 Supreme).

 

I tried OpenATV and this problem is not there, it just shows DVB-T2/C tuner as tuner A and DVB-S2X tuner as tuner B (it was the other way around in the previous revision).

 

 

[Dimitrij]

Please answer

cat /proc/bus/nim_sockets

And maybe need install develop image.

Update uclan-dvb-modules-ustym4kpro.bb

Edited by Dimitrij, 28 February 2024 - 10:31.

[WanWizard]

No issue here with the current develop. I'll flash the release image now.

[WanWizard]

Both tuners are detected in 9.0-release on my box:

root@ustym4kpro:~# cat /proc/bus/nim_sockets
NIM Socket 0:
Type: DVB-S2X
Name: Si2166D
Has_Outputs: no
Frontend_Device: 0
I2C_Device: 0
NIM Socket 1:
Type: DVB-T2
Name: ATBM7821 DVB-T2/C
Has_Outputs: no
Frontend_Device: 1
I2C_Device: 1

Attached Files

•  1_0_19_22C5_80D_2_11A0000_0_0_0_20240228120448.jpg   68.12KB   0 downloads

[Dimitrij]

 

DVB-S2X: Availink AVL62X1

[WanWizard]

Meaning? The tuner is not an Avalink, it's a Silicon Labs Si2166D ?

 

Same on the SF8008, which is an identical box:

root@sf8008:~# cat /proc/bus/nim_sockets
NIM Socket 0:
Type: DVB-S2X
Name: Si2166D
Has_Outputs: no
Frontend_Device: 0
I2C_Device: 0
NIM Socket 1:
Type: DVB-T2
Name: ATBM7821 DVB-T2/C
Has_Outputs: no
Frontend_Device: 1
I2C_Device: 1

Also, the driver update you referred to is already in 9.0-release.

[EnoSat]

SF8008 COMBO

root@sf8008:~# cat /proc/bus/nim_sockets
NIM Socket 0:
Type: DVB-S2X
Name: Si2166D
Has_Outputs: no
Frontend_Device: 0
I2C_Device: 0
NIM Socket 1:
Type: DVB-T2
Name: ATBM7821 DVB-T2/C
Has_Outputs: no
Frontend_Device: 1
I2C_Device: 1

SF8008 SUPREME COMBO

root@sf8008:~# cat /proc/bus/nim_sockets
NIM Socket 0:
Type: DVB-S2
Name: AVL62X1
Has_Outputs: no
Frontend_Device: 0
I2C_Device: 0
NIM Socket 1:
Type: DVB-T2
Name: ATBM7821 DVB-T2/C
Has_Outputs: no
Frontend_Device: 1
I2C_Device: 1

Ustym 4K PRO

root@ustym4kpro:~# cat /proc/bus/nim_sockets
NIM Socket 0:
Type: DVB-S2
Name: AVL62X1
Has_Outputs: no
Frontend_Device: 0
I2C_Device: 0
NIM Socket 1:
Type: DVB-T2
Name: ATBM7821 DVB-T2/C
Has_Outputs: no
Frontend_Device: 1
I2C_Device: 1

Edited by EnoSat, 28 February 2024 - 18:22.

[WanWizard]

Interesting, you have a different tuner than I in the Ustym 4K Pro.

 

Different production run, or secretly also a "supreme" version? What wifi chipset does your box have?

[EnoSat]

root@ustym4kpro:~# lsusb
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 0bda:c812 Realtek Semiconductor Corp. 802.11ac NIC
Bus 001 Device 004: ID 05e3:0751 Genesys Logic, Inc. microSD Card Reader
Bus 001 Device 003: ID 1004:6300 LG Electronics, Inc. G2/Optimus Android Phone [Charge mode]
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

[WanWizard]

Gotcha.

 

So this is indeed "supreme" hardware, so uClan has switched to the new model too, but without reporting it (or probably even without external markings?).

 

So I guess that you don't have a working wifi interface as well (unless you manually installed the driver)? But does your tuner work in 9.0-release or develop?

[Dimitrij]

Simple

Update uclan-dvb-modules-ustym4kpro.bb

need add 8.3

[EnoSat]

uClan doesn't use M2
little input parts comparison
Ustym 4K - AV2018 + AVL62X1
SF8008 - RDA5815M + Si2166D
SF8008 SUPREME - RDA5815m + AVL62X1
OS mio+ 4K - AV2018 + AVL6261C

 

yes,

WiFi no show

Tuner work OK

Edited by EnoSat, 28 February 2024 - 19:19.

[WanWizard]

I don't see the need for that, 8.3 is an old image and nearly EOL. We haven't backported it for the SF8008 too.

 

Besides that, the TS says he has the problem after "updating" an 9.0-release image, which should support it just fine, the uClan BSP was updated the same time the SF8008 BSP was...

[WanWizard]

uClan doesn't use M2

 

What do you mean by that?

 

Ustym 4K - AV2018 + AVL62X1

 

The "supreme" version you have, you mean?

 

Because the box I have, has ATBM7821 + SI2166D.

 

Our 9.0-release and develop images both have BSP support for the AVL62X1 (added sometime last year), so that should work fine. Same with the 88x2cu driver, if you install it manually (need to update the BSP for that).

[WanWizard]

This wifi chipset has a different USB ID from the chipset in the SF8008 supreme, although they both use the same driver. We'll have to double check if our current driver supports this USB ID.

 

I've updated the BSP for both 9.0-release and develop so it includes the driver in the image.

[EnoSat]

SSD M.2

the input tuner consists of two parts,

the input part (AV 2018 or RDA5815) and the input demodulator (AVL6261 or SI2166)

 1705238718738.jpg   58.54KB   0 downloads

in the old uClan it can be seen more vividly (RDA5815 + GX1133) 

 20201127_194129.jpg   177.98KB   0 downloads

Edited by EnoSat, 28 February 2024 - 19:40.

[WanWizard]

Ah, ok.

 

Remains the questions:

• does OpenPLi develop and 9.0-release images work for you, and do you see both tuners
• does the wifi interface work once you've installed the kernel-module-88x2cu driver?

[EnoSat]

Tuner OK, I haven't tried WiFi yet

 

 1_0_19_1F43_CA1_3_EB0000_0_0_0_20240228204738.jpg   74.01KB   0 downloads

[WanWizard]

Can you try when you have the time? Then we know if we need to bug uClan or not...

[Pastoman]

4 versions of USTYM 4K PRO have been released so far, the one I have is the latest V4.

 

The V2 version had an improved display, better placed Wifi antennas and more ventilation holes on the top cover. V3 had new types of tuners (AVL62X1 + ATBM7821) and the package included a new type of remote control. The V4 version has all the improvements of the previous version + it has a new type of motherboard and DualBand Wifi (1200 Mbps).

 

So the newest V4 is the "Ukrainian SUPREME", but without M.2 and Bluetooth

 

I tried flash openpli-9.0-release-ustym4kpro-20240304 and the satellite tuner doesn't detect it either:

 

 20240305084237.jpg   45.82KB   0 downloads

 

In OpenATV you can see both (even if in the opposite order than before):

 

 20240305090743.jpg   97.13KB   0 downloads

 

Wifi in OpenPLI works, both in 2.4 and 5Ghz. It was not necessary to install the driver additionally.

 

Here is a list of tuners in Openpli:

 

 pli.jpg   12.04KB   0 downloads

 

And here in OpenATV:

 

 atv.jpg   13.59KB   0 downloads

 

And finally lsusb:

 

 lsusb.jpg   15.8KB   0 downloads