26 replies to this topic

[Dimitrij]

Test openPli develop

[GT8k]

Ok. I think I'm getting into your point now
 IMG_20240430_153001.jpg   35.74KB   2 downloads  IMG_20240430_153017.jpg   48.21KB   2 downloads

[GT8k]

But what lnb number should I use and band??
Lnb 3 (same with the diseqc position in tuner A
And change the band /or what??  IMG_20240430_153114.jpg   60.96KB   3 downloads

Updte: probably Lnb should be "1" cause its for tuner C... (?)

Edited by GT8k, 30 April 2024 - 13:36.

[GT8k]

Test openPli develop

You mean flash a nightly image??
If it gonna fix my problem.. I could go for it (

[Dimitrij]

But what lnb number should I use and band??
Lnb 3 (same with the diseqc position in tuner A
And change the band /or what?? IMG_20240430_153114.jpg

Updte: probably Lnb should be "1" cause its for tuner C... (?)

Tuner C - 16E

Lnb 1 or 2 or 3 etc...

user band 1 (another number different from tuner A)

DiSeqC mode 1.1

Input 8

 

Edited by Dimitrij, 30 April 2024 - 15:10.

[GT8k]

Woohoo! It's working))
Although now the sat 16E always works from tuner C [not A] but at least it works.

Last but not least, after tuning to another satellite (from 16e where the unicable lnb is installed) I am getting an occasional tune failed message for less than a second (maybe it's an incompatibility of my diseqc...)  IMG_20240430_191437.jpg   76.76KB   3 downloads

[Dimitrij]

Add "DiSEqC 1.1 repeats" or something similar.