47 replies to this topic

[moncho]

After trying all the possible configurations, tuner A stopped working, now only B works, I didn't find any solution, I don't know what to think now if tuner A is broken or it's a driver problem. What do you think, what will be the problem?

[el bandido]

Use only  OpenPLi 9 or higher for the SF8008 Supreme.

Post or upload the settings file you are using Now.

What is the build date and version of OpenPLi image you are using Now (Menu--->Information--->About)?

[moncho]

Use only  OpenPLi 9 or higher for the SF8008 Supreme.

Post or upload the settings file you are using Now.

What is the build date and version of OpenPLi image you are using Now (Menu--->Information--->About)?

Edited by moncho, 5 July 2024 - 04:22.

[el bandido]

Okay
Supply the settings file you are using with that OpenPli 9 image. The settings file you are using Today.
 

[moncho]

Okay
Supply the settings file you are using with that OpenPli 9 image. The settings file you are using Today.
 

 

I leave you the link of the file, since it won't let me upload it here in the forum.

https://drive.google...iew?usp=sharing

[el bandido]

Please zip your settings file and it will upload. Your Google Drive needs permission.
 

[moncho]

Please zip your settings file and it will upload. Your Google Drive needs permission.

Si ya está disponible

[Huevos]

config.Nims.0.advanced.lnb.1.lof=c_band
config.Nims.0.advanced.lnb.1.lofh=4800
config.Nims.0.advanced.lnb.1.lofl=3926
config.Nims.0.advanced.lnb.1.powerMeasurement=false
config.Nims.0.advanced.lnb.1.scrfrequency=1210
config.Nims.0.advanced.lnb.1.threshold=4800
config.Nims.0.advanced.sat.3044.lnb=1
config.Nims.0.advanced.sat.3044.rotorposition=43
config.Nims.0.advanced.sat.3044.usals=false
config.Nims.0.advanced.sats=3044
config.Nims.0.diseqcA=2830
config.Nims.0.diseqcB=2900
config.Nims.0.diseqcC=3601
config.Nims.0.diseqcD=2430
config.Nims.0.diseqcMode=diseqc_a_b_c_d
config.Nims.0.powerMeasurement=false
config.Nims.1.advanced.lnb.1.diseqcMode=1_2
config.Nims.1.advanced.lnb.1.lof=c_band
config.Nims.1.advanced.lnb.1.lofh=5150
config.Nims.1.advanced.lnb.1.lofl=5150

config.Nims.0.advanced.lnb.1.lofh=4800
config.Nims.0.advanced.lnb.1.lofl=3926

 

You still have that in Tuner A. Set both to 5150.

[el bandido]

Okay.

Try the attached settings file. C band should work on Tuner 2 or Tuner B. I do not understand your Ku band setup. It may have 4 lnbs on a diseqc switch?

Transfer the settings file to your receiver using Telnet (putty). Use the Telnet command init 4 to stop the receiver.  Place the attached settings file in the receiver, then use Telnet command init 3 to start the receiver.

Attached Files

•  settings.zip   1.33KB   5 downloads

[moncho]

Okay.

Try the attached settings file. C band should work on Tuner 2 or Tuner B. I do not understand your Ku band setup. It may have 4 lnbs on a diseqc switch?

Transfer the settings file to your receiver using Telnet (putty). Use the Telnet command init 4 to stop the receiver.  Place the attached settings file in the receiver, then use Telnet command init 3 to start the receiver.

Tuner B works well in both bands, right now it is default and configured at 5150 and A stopped working, neither the C and Ku band detects it.

[el bandido]

Please upload the settings file you are using Now.

What are the KU satellites? How is Ku band set up?  Do you have 4 lnbs for KU band Or do you have something else?

[Huevos]

I really think he should disconnect the switch and go direct to the C-band dish for initial testing.

[moncho]

Please upload the settings file you are using Now.

What are the KU satellites? How is Ku band set up?  Do you have 4 lnbs for KU band Or do you have something else?

On tuner A, whether ku or C, without diseq it doesn't work either. I tell you that it is not a cable or diseq failure, since I have several receivers that are working well, gigablue quad, octagon sf8008, edision. With this new octagon supreme receiver, problems arise in the tuners.

https://forums.openp...ttach_id=168797

[moncho]

config.Nims.0.advanced.lnb.1.lof=c_band
config.Nims.0.advanced.lnb.1.lofh=4800
config.Nims.0.advanced.lnb.1.lofl=3926
config.Nims.0.advanced.lnb.1.powerMeasurement=false
config.Nims.0.advanced.lnb.1.scrfrequency=1210
config.Nims.0.advanced.lnb.1.threshold=4800
config.Nims.0.advanced.sat.3044.lnb=1
config.Nims.0.advanced.sat.3044.rotorposition=43
config.Nims.0.advanced.sat.3044.usals=false
config.Nims.0.advanced.sats=3044
config.Nims.0.diseqcA=2830
config.Nims.0.diseqcB=2900
config.Nims.0.diseqcC=3601
config.Nims.0.diseqcD=2430
config.Nims.0.diseqcMode=diseqc_a_b_c_d
config.Nims.0.powerMeasurement=false
config.Nims.1.advanced.lnb.1.diseqcMode=1_2
config.Nims.1.advanced.lnb.1.lof=c_band
config.Nims.1.advanced.lnb.1.lofh=5150
config.Nims.1.advanced.lnb.1.lofl=5150

config.Nims.0.advanced.lnb.1.lofh=4800
config.Nims.0.advanced.lnb.1.lofl=3926

 

You still have that in Tuner A. Set both to 5150.

I already made the configuration, as I mentioned in previous posts, it didn't work either.

[moncho]

I thank everyone for their help and opinions, unfortunately I couldn't get it to work, so it will be returned, in my opinion, do not buy this model, I already read in several forums that this receiver has problems, I bought it on Amazon Germany, So think twice before buying it. THANK YOU AND GREETINGS.

[Huevos]

 

config.Nims.0.advanced.lnb.1.lof=c_band
config.Nims.0.advanced.lnb.1.lofh=4800
config.Nims.0.advanced.lnb.1.lofl=3926
config.Nims.0.advanced.lnb.1.powerMeasurement=false
config.Nims.0.advanced.lnb.1.scrfrequency=1210
config.Nims.0.advanced.lnb.1.threshold=4800
config.Nims.0.advanced.sat.3044.lnb=1
config.Nims.0.advanced.sat.3044.rotorposition=43
config.Nims.0.advanced.sat.3044.usals=false
config.Nims.0.advanced.sats=3044
config.Nims.0.diseqcA=2830
config.Nims.0.diseqcB=2900
config.Nims.0.diseqcC=3601
config.Nims.0.diseqcD=2430
config.Nims.0.diseqcMode=diseqc_a_b_c_d
config.Nims.0.powerMeasurement=false
config.Nims.1.advanced.lnb.1.diseqcMode=1_2
config.Nims.1.advanced.lnb.1.lof=c_band
config.Nims.1.advanced.lnb.1.lofh=5150
config.Nims.1.advanced.lnb.1.lofl=5150

config.Nims.0.advanced.lnb.1.lofh=4800
config.Nims.0.advanced.lnb.1.lofl=3926

 

You still have that in Tuner A. Set both to 5150.

I already made the configuration, as I mentioned in previous posts, it didn't work either.

 

It is still wrong.

 

You are talking to 2 people that have this hardware. I have no problem with C-band with this box.

[el bandido]

I doubt there is anything wrong with the receiver. Sometimes you have to know when to quit. I can respect that....

[moncho]

Okay.

Try the attached settings file. C band should work on Tuner 2 or Tuner B. I do not understand your Ku band setup. It may have 4 lnbs on a diseqc switch?

Transfer the settings file to your receiver using Telnet (putty). Use the Telnet command init 4 to stop the receiver.  Place the attached settings file in the receiver, then use Telnet command init 3 to start the receiver.

Thanks, but tuner B has no problems, tuner A does not work with any band.

 

Edited by moncho, 6 July 2024 - 00:36.

[el bandido]

OK.
Then Return it! You don't want a two tuner receiver that only works on one tuner.

[moncho]

OK.
Then Return it! You don't want a two tuner receiver that only works on one tuner.

It is already made and ready for return, I only recommend that you do not buy it, I already met another person in another forum who has the same problem, I already told him to return it too. I think this batch is going wrong, it has the same problem, tuner A does not work.