Jump to content


Photo

opportunity to update oscam ?


  • Please log in to reply
29 replies to this topic

#1 madiv

  • Senior Member
  • 29 posts

0
Neutral

Posted 8 July 2024 - 16:58

FYI might be worth to update oscam to version ≥11800 ?

 

Reason is this would help Fransat PC7 card owners wishing to watch more than the standard Fransat channels, i.e. channels requiring emm to get written on card.

Before this version, oscam does not write emm on this card, so some users need time to time to put their card back in a cam to acquire new emm.

 

Ref:

- Fransat is on Eutelsat 5.0°W.   Broadcasting channels in French language.

- Wiki   'The OScam version will only be updated when there is a reason for it'   https://wiki.openpli.org/Softcam/OSCam

 

Thanks :)



Re: opportunity to update oscam ? #2 WanWizard

  • PLi® Core member
  • 69,460 posts

+1,768
Excellent

Posted 8 July 2024 - 16:59

For which OpenPLi version ?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: opportunity to update oscam ? #3 madiv

  • Senior Member
  • 29 posts

0
Neutral

Posted 8 July 2024 - 17:10

Hi WanWizard,

You are so quick :)

Personally I am using latest stable = Release-9.0.

That would be a good start ?



Re: opportunity to update oscam ? #4 WanWizard

  • PLi® Core member
  • 69,460 posts

+1,768
Excellent

Posted 8 July 2024 - 19:46

I'll try to find some time tomorrow.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: opportunity to update oscam ? #5 madiv

  • Senior Member
  • 29 posts

0
Neutral

Posted 8 July 2024 - 20:02

That's fine.

I already installed it locally and won't be able to update from feed for a while.

But as it helped me to open some channels, I thought it might be beneficial to some other OpenPLi users too.

Hence above post.

Thanks for your support.



Re: opportunity to update oscam ? #6 WanWizard

  • PLi® Core member
  • 69,460 posts

+1,768
Excellent

Posted 10 July 2024 - 12:09

I've updated both the 8.3-release and 9.0-release feeds.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: opportunity to update oscam ? #7 madiv

  • Senior Member
  • 29 posts

0
Neutral

Posted 10 July 2024 - 16:06

Thanks WanWizard, I believe that will help many Fransat PC7 card users  :)



Re: opportunity to update oscam ? #8 Pr2

  • PLi® Contributor
  • 6,129 posts

+261
Excellent

Posted 11 July 2024 - 17:16

I've updated both the 8.3-release and 9.0-release feeds.

 

Hi WanWizard,

 

Did you also update develop? I am interested in the latest OScam but I am using develop as you know.

 

Thanks


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: opportunity to update oscam ? #9 WanWizard

  • PLi® Core member
  • 69,460 posts

+1,768
Excellent

Posted 11 July 2024 - 17:21

Develop isn't pinned, it always builds from HEAD.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: opportunity to update oscam ? #10 Pr2

  • PLi® Contributor
  • 6,129 posts

+261
Excellent

Posted 11 July 2024 - 17:24

Thanks.


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: opportunity to update oscam ? #11 bertwit60

  • New Member
  • 4 posts

0
Neutral

Posted 11 July 2024 - 17:25

Thanks a million for the update.

 

If you have time, please try to fix the warning Missing dvbcsa ecm headers during build in the log

2024/07/11 18:47:32 00000000 s     (main) Host name      = vuduo4k
2024/07/11 18:47:32 00000000 s     (main) Release        = 4.1.45-1.17
2024/07/11 18:47:32 00000000 s     (main) Version        = #1 SMP Mon Jul 31 22:32:50 UTC 2023
2024/07/11 18:47:32 00000000 s     (main) Machine        = armv7l
2024/07/11 18:47:32 00000000 s     (main) Stb model      = dm8000
2024/07/11 18:47:32 00000000 s     (main) Stb vumodel    = vuduo4k
2024/07/11 18:47:32 00000000 s     (main) Stb boxtype    = vuduo4k
2024/07/11 18:47:32 00000000 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2149
2024/07/11 18:47:32 00000000 s    (relay) Stream Relay server initialized
2024/07/11 18:47:32 00000000 s      (emu) OSCam-Emu version 802
2024/07/11 18:47:32 00000000      (relay) WARNING: (wrong) dynamic dvbcsa parallel mode = 32 (relay buffer time: 0 ms)! ECM processing via Streamrelay does not work! Missing dvbcsa ecm headers during build!

Also, version is shown in the web interface as Version: 2.24.07-11800-802 perhaps it would be better to show as previous versions 11800-802 or r11800-802

 

Thanks again for the update.



Re: opportunity to update oscam ? #12 WanWizard

  • PLi® Core member
  • 69,460 posts

+1,768
Excellent

Posted 11 July 2024 - 18:09

We don't make oscam, so for changes to the web interface, you'll have to ask the oscam developers.

 

And from what is that the output, I have never seen that before?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: opportunity to update oscam ? #13 dany

  • Senior Member
  • 230 posts

+8
Neutral

Posted 11 July 2024 - 21:39

oscam-emu (openpli-develop) werkt niet goed na de updates van vandaag, het werkt maar een minuut en stopt dan


pli image is de beste

Re: opportunity to update oscam ? #14 bertwit60

  • New Member
  • 4 posts

0
Neutral

Posted 12 July 2024 - 08:26

WanWizard you are right of course about the changes to the web interface.

 

The oscam-emu log is from the latest 2.24.07-11800-802 enigma2-plugin-softcams-oscam_git10711+570851f-r0.0_armv7ahf-neon.ipk with default oscam-emu settings on a vu duo 4k with openpli 9.0.

 

All oscam-emu dependecies are installed including libdvbcsa1 but according to the warning the missing dvbcsa ecm headers are not found during the build of oscam-emu.

 

I can't receive satellites with streamrelay to check if the other warning of ECM processing via Streamrelay does not work! is valid.

 

Thanks again for taking a look.



Re: opportunity to update oscam ? #15 WanWizard

  • PLi® Core member
  • 69,460 posts

+1,768
Excellent

Posted 12 July 2024 - 14:13

Will do.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: opportunity to update oscam ? #16 Tech

  • Forum Moderator
    PLi® Core member
  • 14,785 posts

+469
Excellent

Posted 12 July 2024 - 15:27



oscam-emu (openpli-develop) werkt niet goed na de updates van vandaag, het werkt maar een minuut en stopt dan

That in itself is quite special, because nothing has been updated in that version in recent weeks, except for a small adjustment, but it seems to me that this will cause everything to stop working.

 

So you will have to provide a little bit more information than just the comment that the emu stops working after 1 minute


Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....

On the edge of the abyss, a step forward is not always progress....


Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna

Software : HomeBuild OpenPLi Develop and Kirkstone builds, local cards driven by OsCam


Press the Posted Image button on the buttom right of this message ;)


Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki


Re: opportunity to update oscam ? #17 dany

  • Senior Member
  • 230 posts

+8
Neutral

Posted 12 July 2024 - 15:43

Tech ... thank you for reply

 

In fact, i don't know if Oscam emu has been updated or not, but what i noticed is that it no longer works after yesterday's update, and today's update did not solve the problem either.
I mean the channel freezes after 1 min and does not work until softcam is restarted. it works for a minute and then stops , you have to restart the softcam every min

 

thank you all


Edited by dany, 12 July 2024 - 15:44.

pli image is de beste

Re: opportunity to update oscam ? #18 Tech

  • Forum Moderator
    PLi® Core member
  • 14,785 posts

+469
Excellent

Posted 12 July 2024 - 15:53

Can you provide more information about the OpenPLi version used and which Oscam version you have in the box?
It also might be interesting to know with which STB you experience these problems....
 
On which channels/provider are you experiencing those freezes?

Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....

On the edge of the abyss, a step forward is not always progress....


Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna

Software : HomeBuild OpenPLi Develop and Kirkstone builds, local cards driven by OsCam


Press the Posted Image button on the buttom right of this message ;)


Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki


Re: opportunity to update oscam ? #19 WanWizard

  • PLi® Core member
  • 69,460 posts

+1,768
Excellent

Posted 12 July 2024 - 15:56

Are we talking about the same problem (dany and bertwit60)?

 

This is about oscam in release images, not in develop (which can always be instable, as is builds oscam from HEAD and they could have committed something that breaks it.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: opportunity to update oscam ? #20 dany

  • Senior Member
  • 230 posts

+8
Neutral

Posted 12 July 2024 - 15:57

openpli-develop 11-7-2024

vuduo4k

oscam emu ( git10768+b1ecb72-r0.0)

on all channels


pli image is de beste


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users