frvhove

Op onregelmatige tijdstippen krijg ik de aanduiding" afstemming fout".

Debug files duiden aan dat bij de foute afstemming , de freq met 1mhz minder is tov een goede afstemming.

(zie verschil in de bijlagen).(gn bijlagen??You aren't permitted to upload this kind of file)

Bij een foute afstemming kan ik met satfinder de juiste freq instellen en na scan is de afstemming ok.

Kan iemand mij verder helpen? (hd51-openpli 7.2)

=bij foute afstemming 11537000 zou 11538000

........

[eDVBFrontend0] prepare_sat System 0 Freq 11537000 Pol 1 SR 22000000 INV 2 FEC 0 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1787 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] tune failed.
[eDVBServicePlay] DVB service failed to tune - error 1
RemovePopup, id = ZapError
AddPopup, id = ZapError
[Skin] Processing screen 'MessageBoxSimple'.
[eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!!
[eDVBServicePMTHandler] incorrect namespace. expected: c00000 current: ffffffff
[eDVBServicePMTHandler] incorrect transport_stream_id. expected: 3fe current: ffffffff
[eDVBServicePMTHandler] incorrect original_network_id. expected: 1 current: ffffffff
[eDVBFrontend0] set static current limiting
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 7
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend0] sleep 50ms
[eDVBFrontend0] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend0] sleep 150ms
[eDVBFrontend0] sendDiseqc: e01038f0(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[DVBCAHandler] no more services
[eDVBFrontend0] set dynamic current limiting
[eDVBFrontend0] fe event: status 20, inversion off, m_tuning 2
[eDVBFrontend0] FE_TIMEDOUT! ..abort
[eDVBChannel] OURSTATE: failed, retune

....

=goede afstemming

...

[eDVBFrontend0] prepare_sat System 0 Freq 11538000 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1788 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:1B03:3FE:1:C00000:0:0:0:
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=0, source=0 fesource=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBFrontend0] set static current limiting
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] setVoltage 1
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 0
[eDVBFrontend0] sleep 75ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] sendDiseqc: e01038f0(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok

....

Bij het overschakelen naar een stream van een vlaamse zender(VRT,canvas,..) reageert de HD51 met een restart. hierbij krijg ik geen scatchlog.

Versie openpli 7.2, maar ook bij reeds V7.1. Ik heb het dan zelf opgelost gekregen maar weet niet hoe.

Na inschakelen van debuglog volgende output (zie attach file)

[eDVBServicePlay] timeshift
playing 4097:0:1:5221:C99:3:EB0000:0:0:0:https%3a//live-vrt.akamaized.net/groupc/live/8edf3bdf-7db3-41c3-a318-72cb7f82de66/live_aes.isml/playlist.m3u8?fluxustv.m3u8:VRT één HD (België)
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:439F:2CEC:13E:820000:0:0:0:
[eDVBCAService] free service 1:0:1:439F:2CEC:13E:820000:0:0:0:
[eDVBServicePlay] timeshift
[eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
[eDVBPCR0] DEMUX_STOP ok
[eDVBPCR0] destroy
[eDVBVideo0] DEMUX_STOP  ok
[eDVBVideo0] VIDEO_STOP ok
[eDVBVideo0] destroy
[eDVBAudio0] AUDIO_STOP ok
[eDVBAudio0] DEMUX_STOP ok
[eDVBAudio0] AUDIO_CONTINUE ok
[eDVBAudio0] destroy
[eDVBText0] DEMUX_STOP ok
[eDVBText0] destroy
[eDVBResourceManager] start release channel timer
[eServiceMP3] construct!
[eServiceMP3] playbin uri=https://live-vrt.aka...8?fluxustv.m3u8
[eServiceMP3] starting pipeline
[eServiceMP3] state transition NULL -> READY
[eServiceMP3] Gstreamer error: Couldn't retrieve key for decryption (9) from hlsdemux0
Backtrace:
/usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x72C2C]
/lib/libc.so.6(__default_rt_sa_restorer) [0xB61ECC60]
-------FATAL SIGNAL
Segmentation fault

(sorry, no permission to upload)

Waar kan ik verder zoeken?