Obi70

OpenPLi Enigma2 crash log

crashdate=Di Feb  4 11:57:52 2020
compiledate=Jan 27 2020
skin=PLi-FullNightHD/skin.xml
sourcedate=2020-01-21
branch=release-7.2
rev=c2d37ea
component=Enigma2

stbmodel=et9000
stbmodel=dm800se
kernelcmdline= bmem=216M ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs console=null consoleblank=0
nimsockets=NIM Socket 0:
imageissue=openpli 7.2-release %h

REMOVE Peer et9x00
REMOVE Peer et9x00
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eDVBPESReader] ERROR reading PES (fd=56): Value too large for defined data type
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eDVBPESReader] ERROR reading PES (fd=58): Value too large for defined data type
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eDVBPESReader] ERROR reading PES (fd=58): Value too large for defined data type
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
Unhandled Error
Traceback (most recent call last):
  File "/usr/lib/python2.7/site-packages/twisted/internet/defer.py", line 310, in addCallbacks
   
  File "/usr/lib/python2.7/site-packages/twisted/internet/defer.py", line 653, in _runCallbacks
   
  File "/usr/lib/python2.7/site-packages/twisted/internet/base.py", line 441, in _continueFiring
   
  File "/usr/lib/python2.7/site-packages/twisted/internet/base.py", line 671, in disconnectAll
   
--- <exception caught here> ---
  File "/usr/lib/python2.7/site-packages/twisted/python/log.py", line 103, in callWithLogger
   
  File "/usr/lib/python2.7/site-packages/twisted/python/log.py", line 86, in callWithContext
   
  File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 122, in callWithContext
   
  File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 85, in callWithContext
   
  File "/usr/lib/python2.7/site-packages/twisted/internet/unix.py", line 420, in connectionLost
   
exceptions.OSError: [Errno 2] No such file or directory: '/tmp/hotplug.socket'

 

dmesg

<6>Brought up 2 CPUs
<6>devtmpfs: initialized
<6>NET: Registered protocol family 16
<6>USB0: power enable is active low; overcurrent is active low
<6>PCI2.3->SDRAM window: 512 MB
<6>bio: create slab <bio-0> at 0
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>Linux video capture interface: v2.00
<6>Advanced Linux Sound Architecture Driver Initialized.
<6>PCI host bridge to bus 0000:00
<6>pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff]
<6>pci_bus 0000:00: root bus resource [io  0x0400-0x83ff]
<6>pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
<7>pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
<6>PCI host bridge to bus 0000:01
<6>pci_bus 0000:01: root bus resource [mem 0x10510000-0x1051ffff]
<6>pci_bus 0000:01: root bus resource [io  0x8400-0x87ff]
<6>pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
<7>pci 0000:01:00.0: [14e4:8602] type 00 class 0x01010f
<6>PCI: found device 14e4:8602 on SATA bus, slot 0 (irq 42)
<7>pci 0000:01:00.0: reg 24: [mem 0x00000000-0x00000fff]
<7>pci 0000:01:00.0: reg 30: [mem 0x00000000-0x000007ff pref]
<7>pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
<6>pci 0000:01:00.0: BAR 5: assigned [mem 0x10510000-0x10510fff]
<6>pci 0000:01:00.0: BAR 6: assigned [mem 0x10511000-0x105117ff pref]
<6>Bluetooth: Core ver 2.16
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: SCO socket layer initialized
<6>cfg80211: Calling CRDA to update world regulatory domain
<6>Switching to clocksource upg
<5>FS-Cache: Loaded
<6>NET: Registered protocol family 2
<6>TCP established hash table entries: 4096 (order: 3, 32768 bytes)
<6>TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
<6>TCP: Hash tables configured (established 4096 bind 4096)
<6>TCP: reno registered
<6>UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>NET: Registered protocol family 1
<6>RPC: Registered named UNIX socket transport module.
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>PCI: CLS 0 bytes, default 64
<5>NFS: Registering the id_resolver key type
<5>Key type id_resolver registered
<5>Key type id_legacy registered
<6>fuse init (API version 7.20)
<6>msgmni has been set to 567
<6>io scheduler noop registered
<6>io scheduler cfq registered (default)
<6>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22) is a 16550A
<6>serial8250.0: ttyS1 at MMIO 0x10400b40 (irq = 66) is a 16550A
<6>serial8250.0: ttyS2 at MMIO 0x10400b80 (irq = 67) is a 16550A
<6>loop: module loaded
<7>sata_brcmstb 0000:01:00.0: version 4.0
<7>__clk_enable: sata [1]
<4>PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
<7>sata_brcmstb 0000:01:00.0: setting latency timer to 64
<6>scsi0 : sata_brcmstb
<6>scsi1 : sata_brcmstb
<6>ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42
<6>ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42
<6>Broadcom STB NAND controller (BrcmNand Controller)
<6>bcmemac: Broadcom STB 10/100 EMAC driver v3.0
<6>bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:16:b4:03:a6:e9)
<6>bcmemac: not registering interface #1 at 0x10090000 (no PHY detected)
<6>usbcore: registered new interface driver zd1201
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<7>__clk_enable: usb [1]
<6>ehci-brcm ehci-brcm.0: Broadcom STB EHCI
<6>ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
<6>ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
<6>ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<6>ehci-brcm ehci-brcm.1: Broadcom STB EHCI
<6>ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
<6>ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500
<6>ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>ohci-brcm ohci-brcm.0: Broadcom STB OHCI
<6>ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
<6>ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<6>ohci-brcm ohci-brcm.1: Broadcom STB OHCI
<6>ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
<6>ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>mousedev: PS/2 mouse device common for all mice
<6>i2c /dev entries driver
<6>usbcore: registered new interface driver btusb
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>TCP: cubic registered
<6>NET: Registered protocol family 17
<6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>Bluetooth: HIDP socket layer initialized
<5>Key type dns_resolver registered
<6>EBI CS1: setting up NAND flash (primary)
<6>mtd->oobsize=0, mtd->eccOobSize=0
<4>NAND_CS_NAND_XOR=00000000
<4>B4: NandSelect=50000200, nandConfig=15142200, chipSelect=1
<4>brcmnand_read_id: CS1: dev_id=ecf10095
<4>After: NandSelect=50000200, nandConfig=15142200
<4>Block size=00020000, erase shift=17
<6>NAND Config: Reg=15142200, chipSize=128 MB, blockSize=128K, erase_shift=11
<6>busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
<4>timing1 not adjusted: 5363444f
<4>timing2 not adjusted: 00000fc6
<4>eccLevel=15, 1Ksector=0, oob=16
<4>nbrBitsPerCell=2, cellinfo=0, chip->cellinfo=00000000
<4><--brcmnand_set_acccontrol: acc b4: d7ff1010, after: d7ff1010
<6>BrcmNAND mfg ec f1 Samsung K9F1G08U0A 128MB on CS1
<6>
<6>Found NAND on CS1: ACC=d7ff1010, cfg=15142200, flashId=ecf10095, tim1=5363444f, tim2=00000fc6
<6>BrcmNAND version = 0x0302 128MB @00000000
<4>B4: NandSelect=50000200, nandConfig=15142200, chipSelect=1
<4>brcmnand_read_id: CS1: dev_id=ecf10095
<4>After: NandSelect=50000200, nandConfig=15142200
<4>Found NAND flash on Chip Select 1, chipSize=128MB, usable size=128MB, base=0
<4>brcmnand_scan: B4 nand_select = 50000200
<4>brcmnand_scan: After nand_select = 50000200
<6>page_shift=11, bbt_erase_shift=17, chip_shift=27, phys_erase_shift=17
<6>Brcm NAND controller version = 3.2 NAND flash size 128MB @18000000
<4>ECC layout=brcmnand_oob_bch4_4k
<6>brcmnand_scan:  mtd->oobsize=64
<6>brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
<6>brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
<4>-->brcmnand_default_bbt
<4>brcmnand_default_bbt: bbt_td = bbt_main_descr
<7>Bad block table Bbt0 found at page 0000ffc0, version 0x01 for chip on CS1
<7>Bad block table 1tbB found at page 0000ff80, version 0x01 for chip on CS1
<4>Adjust partition complete size from entire device to 7f00000 to avoid overlap with BBT reserved space
<4>Adjust partition rootfs size from entire device to 7900000 to avoid overlap with BBT reserved space
<5>Creating 3 MTD partitions on "brcmnand.0":
<5>0x000000000000-0x000007f00000 : "complete"
<5>0x000000000000-0x000000600000 : "kernel"
<5>0x000000600000-0x000007f00000 : "rootfs"
<6>PM: CP0 COUNT/COMPARE frequency depends on divisor
<5>UBI: attaching mtd2 to ubi0
<6>usb 2-1: new high-speed USB device number 2 using ehci-brcm
<6>hub 2-1:1.0: USB hub found
<6>hub 2-1:1.0: 4 ports detected
<6>usb 2-1.2: new full-speed USB device number 3 using ehci-brcm
<5>UBI: scanning is finished
<5>UBI: attached mtd2 (name "rootfs", size 121 MiB) to ubi0
<5>UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
<5>UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
<5>UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
<5>UBI: good PEBs: 968, bad PEBs: 0, corrupted PEBs: 0
<5>UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
<5>UBI: max/mean erase counter: 42/9, WL threshold: 4096, image sequence number: 157614232
<5>UBI: available PEBs: 0, total reserved PEBs: 968, PEBs reserved for bad PEB handling: 20
<5>UBI: background thread "ubi_bgt0d" started, PID 49
<6>ALSA device list:
<6>  No soundcards found.
<4>Warning: unable to open an initial console.
<6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata1.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
<6>ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 0/32)
<6>ata1.00: configured for UDMA/133
<5>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD204UI  1AQ1 PQ: 0 ANSI: 5
<5>sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sda: sda1
<5>sd 0:0:0:0: [sda] Attached SCSI disk
<6>ata2: SATA link down (SStatus 4 SControl 300)
<5>UBIFS: background thread "ubifs_bgt0_0" started, PID 51
<5>UBIFS: mounted UBI device 0, volume 0, name "rootfs"(null)
<5>UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
<5>UBIFS: FS size: 118468608 bytes (112 MiB, 933 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
<5>UBIFS: reserved for root: 0 bytes (0 KiB)
<5>UBIFS: media format: w4/r0 (latest is w4/r0), UUID EDA44B85-4E24-470B-BE8B-7F55F4519C18, small LPT model
<6>VFS: Mounted root (ubifs filesystem) on device 0:10.
<6>devtmpfs: mounted
<6>Freeing unused kernel memory: 316k freed
<4>EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
<6>EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<6>usbcore: registered new interface driver tpm
<4>dvb: module_layout: kernel tainted.
<4>Disabling lock debugging due to kernel taint
<6>Console: switching to colour frame buffer device 160x45
<6>input: dreambox remote control (native) as /devices/virtual/input/input0
<6>input: dreambox advanced remote control (native) as /devices/virtual/input/input1
<6>DVB: registering new adapter (dvb0)
<6>platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
<6>platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)...
<6>input: front panel as /devices/virtual/input/input2
<6>Console: switching to colour dummy device 80x25
<6>NET: Registered protocol family 10
<6>Installing knfsd (copyright © 1996 okir@monad.swb.de).
<6>NFS: bad mount option value specified: vers=4.2
<6>NFS: bad mount option value specified: vers=4.2
<4>UBIFS warning (pid 919): ubifs_vm_page_mkwrite: out of space for mmapped file (inode number 8942)
<4>UBIFS warning (pid 919): ubifs_vm_page_mkwrite: out of space for mmapped file (inode number 8942)