dotnet

Hello,

I pursued the tests last days. As said, BSPlayer in PC (and mobile!) is praticly the only streamplayer that can open this streams.

It's seems that the channels have many stream/channels, only one with data (the stream id change at every start) :

the most of players (like vlc based) don't open this stream. A loop seems to be needed to find the stream/track with data..

The channels with only a stream/track for audio and video can be opened by all mediaplayers :

Then I am back at "no clue".

 

Never seen this, and I don't have an explanation for it.

 

I can only repeat, everything you can watch, and you can record, you can stream.

You right !

I can open a stream from a 'not working' transponder in my PC using another Player, BSPlayer instead VLC.
There is a mistery because, the channels that I stream have the same codecs, same resolution and the initial problem appears on VLC and SmartTV at simultaneous time.

I will do some tests tomorrow with another vu+ receiver

Recording is technically identical to streaming. The only difference is the destination (file handle instead of network socket).

 

What kind of network connection do you have between box and client? How stable is that connection, which how much latency?

 

You haven't answered this question yet.
 

Streaming is realtime, if there is too much jitter and latency in the connection, in combination with flaky bandwidth (like wifi that is shared with a few smartphones), the stream will never start as the sync never happens.

My tests are only do localy.

The receiver (limited at 100 Mbps)  is wired to a gigabit switch, the PC with VLC connect to the switch with 300 Mbps.

The SmartTV is wired (1 Gbps)

* I can watch hd channels in the non impacted transponders

I have absolutely no clue.

 

The box, nor the software, has any interest in what transponder it is, it is just bits in a datastream. If you can watch it, you can stream it.

 

Can you record the channels you can't stream?

yes. just tryed it.

I can record the channels and play the recorded files.

I doubt that will fix your problem.

 

Put the box in standby (not deep standby), and make sure no streams of recordings are active.

 

Which channels do stream? Which channels don't? Do you have FTA channels that don't stream? Which ones? What satellite are we talking about?

 

What kind of network connection do you have between box and client? How stable is that connection, which how much latency?

Thanks for help.

I tryed to stream in standby mode just after a reboot. the problem remains.

The sat : Hispasat
I can't stream FTA channels on a 'impacted' transponder.
channels tested :      Canal de teste - Frequency 12360.00H txp: 115
TV Record : Frequency 12130.00H     txp: 109

I only can stream channels from this transponder 12246.00h    txp: 112
They are all crypted on this transponder.

Some channels are similars like Sport 1 hd, Sport 2 hd etc from the same provider and I can only stream the channel on the 'good' transponder.

regards