Abu Baniaz

Pull request submitted.

https://github.com/v...-vuplus/pull/70

 

I have posted a link back here. Do they usually need a nudge?

what model of gigablue is this one?

GB UE 4K

Sent from my Moto G (5S) using Forum Fiend v1.3.3.

My remote is here

https://github.com/o...otes/gb3/rc.png

Not sure if this helps...

 

root@gbue4k:~# evtest
No device specified, trying to scan all of /dev/input/event*
Available devices:
/dev/input/event0:      gigablue remote control
Select the device event number [0-0]: 0
Input driver version is 1.0.1
Input device ID: bus 0x19 vendor 0x0 product 0x0 version 0x0
Input device name: "gigablue remote control"
Supported events:
  Event type 0 (EV_SYN)
  Event type 1 (EV_KEY)
    Event code 2 (KEY_1)
    Event code 3 (KEY_2)
    Event code 4 (KEY_3)
    Event code 5 (KEY_4)
    Event code 6 (KEY_5)
    Event code 7 (KEY_6)
    Event code 8 (KEY_7)
    Event code 9 (KEY_8)
    Event code 10 (KEY_9)
    Event code 11 (KEY_0)
    Event code 59 (KEY_F1)
    Event code 60 (KEY_F2)
    Event code 62 (KEY_F4)
    Event code 102 (KEY_HOME)
    Event code 103 (KEY_UP)
    Event code 105 (KEY_LEFT)
    Event code 106 (KEY_RIGHT)
    Event code 108 (KEY_DOWN)
    Event code 113 (KEY_MUTE)
    Event code 114 (KEY_VOLUMEDOWN)
    Event code 115 (KEY_VOLUMEUP)
    Event code 116 (KEY_POWER)
    Event code 128 (KEY_STOP)
    Event code 139 (KEY_MENU)
    Event code 164 (KEY_PLAYPAUSE)
    Event code 167 (KEY_RECORD)
    Event code 168 (KEY_REWIND)
    Event code 174 (KEY_EXIT)
    Event code 208 (KEY_FASTFORWARD)
    Event code 226 (KEY_MEDIA)
    Event code 272 (BTN_LEFT)
    Event code 273 (BTN_RIGHT)
    Event code 274 (BTN_MIDDLE)
    Event code 275 (BTN_SIDE)
    Event code 276 (BTN_EXTRA)
    Event code 277 (BTN_FORWARD)
    Event code 278 (BTN_BACK)
    Event code 352 (KEY_OK)
    Event code 357 (KEY_OPTION)
    Event code 358 (KEY_INFO)
    Event code 361 (KEY_ARCHIVE)
    Event code 362 (KEY_PROGRAM)
    Event code 364 (KEY_FAVORITES)
    Event code 365 (KEY_EPG)
    Event code 370 (KEY_SUBTITLE)
    Event code 375 (KEY_SCREEN)
    Event code 377 (KEY_TV)
    Event code 385 (KEY_RADIO)
    Event code 388 (KEY_TEXT)
    Event code 390 (KEY_AUX)
    Event code 392 (KEY_AUDIO)
    Event code 393 (KEY_VIDEO)
    Event code 395 (KEY_LIST)
    Event code 398 (KEY_RED)
    Event code 399 (KEY_GREEN)
    Event code 400 (KEY_YELLOW)
    Event code 401 (KEY_BLUE)
    Event code 402 (KEY_CHANNELUP)
    Event code 403 (KEY_CHANNELDOWN)
    Event code 407 (KEY_NEXT)
    Event code 412 (KEY_PREVIOUS)
    Event code 438 (KEY_CONTEXT_MENU)
  Event type 2 (EV_REL)
    Event code 0 (REL_X)
    Event code 1 (REL_Y)
    Event code 8 (REL_WHEEL)
  Event type 4 (EV_MSC)
    Event code 4 (MSC_SCAN)
Key repeat handling:
  Repeat type 20 (EV_REP)
    Repeat code 0 (REP_DELAY)
      Value    400
    Repeat code 1 (REP_PERIOD)
      Value    125
Properties:
Testing ... (interrupt to exit)
***********************************************
  This device is grabbed by another process.
  No events are available to evtest while the
  other grab is active.
  In most cases, this is caused by an X driver,
  try VT-switching and re-run evtest again.
  Run the following command to see processes with
  an open fd on this device
 "fuser -v /dev/input/event0"
***********************************************

I tried a USB keyboard on a solo 4k, most buttons worked. Easiest method to test was network setup, so that I can confirm worked. With regards to your IR remote, is it because receiver is expecting text-like entry instead of keyboard. Do you have same problem if virtual keyboard is active?

The Solo 4K is with a friend so I can't test for you. Will a duo 4k do?

Sent from my Moto G (5S) using Forum Fiend v1.3.3.

Looks like we have a decision for Enigma2.

Tabs only.
Where we have a mix of spaces and tabs, convert space to tabs.

Agreed?

Sent from my Moto G (5S) using Forum Fiend v1.3.3.

Not sure if it helps or not, have you seen this?

https://forums.openp...emote-controls/

A thief takes and does not give. Persian Prince contributes to other images.

there is a pull request for Linux 4lcd

Sent from my Moto G (5S) using Forum Fiend v1.3.3.

I have removed the libc6 version and enigma2 dependency from these attachments. Otherwise same as the ones in post 90.

The slot/connection is the same for the various cards

You can get:
FBC satellite tuner card/complex
FBC DVB-C tuner card
Twin Terrestrial tuner card (VU+ Dual DVB-T/T2 MTSIF Terrestrial Tuner for Uno 4K Uno 4K SE Ultimo 4K Duo 4K)

The problem Willy is that you do all the hard work on your own and in the background. Not many people truly appreciate the amount of hard work you put into EPG for E2 receivers for free.

If you remember, I suggested that the channels file should be on GitHub, people can submit changes that way.

There are many people with IT backgrounds who frequent the forum. I am sure if you open up and allow others to assist, they will gladly do so.

You do so much for the community. Don't let any misplaced labelling of your efforts keep you down. You have been doing a fantastic job.

that is not by Willy, it's by jenseneverest. I think He's pulled the plug because cant fetch from https

Sent from my Moto G (5S) using Forum Fiend v1.3.3.

A "Customer Experience" department usually decides what should be presented to the end user. This design is then given to the programmers who make it happen.

No Enigma2 team has such a setup.

We went through a similar stage when our menus got changed. The fact that translations have to be done should not hinder improvement.

Please remain respectful and cordial with each other. It is OK to disagree.

Sent from my Moto G (5S) using Forum Fiend v1.3.3.

Issue avoided for me on Solo 4K using a GT_Sat LNB.