wkrisn

Ik ook niet, die ellendige DMM drivers roepen zoveel onzinnige log info dat alle interessante info al weg is.

Een mogelijkheid om ze toch te zien: Ga naar /etc/, daar is een subdir "modules-autoload.d" (ongeveer). In die subdir staat een file die met een underscore begint en eindigt op ".conf". Verplaats deze naar een andere directory (hij moet uit deze directory weg, dus niet alleen renamen). Hierna start Enigma niet meer op, maar kun je wel een fatsoelijke dmesg log krijgen na een reboot. Zet de file daarna weer terug om hem te repareren.

(en tussendoor: Heb je al een schone flash geprobeerd?)

Milo bedankt voor het meedenken, het lag uiteindelijk toch aan tspanel.

Voor mensen die hetzelfde probleem hebben of ooit mogen krijgen. Ik heb tspanel opnieuw geïnstalleerd en via ftp alles behalve de mountsettings van tspanel verwijderd. Ik ben af van deze vervelende plugin en heb alle mountpoints terug.

Special thanks to wanwizard & catastrofus. Mijn inziens zitten we allemaal op een forum om elkaar te helpen. De bijdehante opmerkingen van jullie hebben mij echt geholpen, klasse werk jongens!

Ik ook niet, die ellendige DMM drivers roepen zoveel onzinnige log info dat alle interessante info al weg is.

Een mogelijkheid om ze toch te zien: Ga naar /etc/, daar is een subdir "modules-autoload.d" (ongeveer). In die subdir staat een file die met een underscore begint en eindigt op ".conf". Verplaats deze naar een andere directory (hij moet uit deze directory weg, dus niet alleen renamen). Hierna start Enigma niet meer op, maar kun je wel een fatsoelijke dmesg log krijgen na een reboot. Zet de file daarna weer terug om hem te repareren.

(en tussendoor: Heb je al een schone flash geprobeerd?)

Een schone flash heb ik nog niet geprobeerd. Maar ik denk dat ik erachter ben waardoor mijn mount points corrupt zijn geraakt. Ik heb gelezen dat tspanel en openpli niet samen gaan, en je mount instellingen kan beschadigen. Waarschijnlijk is dit het probleem. Tspanel zit er al een tijdje weer af, maar de problemen begonnen sinds dien. Ik denkt dat niet meer hersteld kan worden, ik zal dus de image opnieuw moeten flashen.

 

Dmesg kan ik maar gedeeltelijk kopieren:

Beter terminal programma gebruiken (putty of minicom), of het volgende doen (werkt altijd goed):

dmesg > /tmp/dmesg.log

en dan /tmp/dmesg.log opsturen. Je kunt die ook op een stick zetten bijvoorbeeld (/tmp/ vervangen door /media/usb/)

Dit liefst doen kort na het aan zetten, anders wordt er teveel overschreven.

 

Dit is de dmesg.log direct na het opstarten. Ik word er niet echt wijzer uit

650000] 00, retry
[   12.650000] 00, retry
[   12.650000] 00, retry
[   12.651000] 00, retry
[   12.651000] 00, retry
[   12.652000] signature: 00 00 00 00
[   12.653000] wrong type!
[   12.671000] set sb to 3(2)
[   12.671000] set fb to 2(-1)
[   12.672000] set input to 0
[   12.672000] set fb to 2(-1)
[   12.677000] bcm_video_analog_port_setup (fmt=7)
[   12.678000] SET FORMAT: display[1], format=7
[   12.679000] display 0 uses vbi path 1
[   12.679000] display 1 uses vbi path 0
[   12.681000] HDMI: ignore false positive disconnect!
[   12.681000] HDMI: now powered down
[   12.682000] HDMI: Unable to retrieve Rx EDID info.. no rx device
[   12.683000] using 50.00Hz as MonitorRefreshRate
[   12.684000] SET FORMAT: display[0], format=37
[   12.684000] set fb to 2(0)
[   12.684000] bcm_video_analog_port_setup (fmt=7)
[   12.685000] SET FORMAT: display[1], format=7
[   12.708000] disable wss on display 0
[   12.708000] disable wss on display 1
[   12.711000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
[   12.768000] HDMI: use logical CEC address 3
[   12.843000] CEC send ok!
[   12.881000] enable mad
[   12.927000] VIDEO0: set fallback framerate to 60000
[   12.927000] VIDEO0: set progressive override mode to 1
[   12.928000] VIDEO0: set streamtype!
[   12.928000] set MPEG2
[   12.929000] sw rave disabled!
[   12.933000] sync is off so we enable it
[   12.933000] playback!
[   12.934000] total video delay: 0 (0 ms)
[   12.937000] VIDEO0: start decode
[   12.938000] flush video decoder
[   12.938000] VIDEO0 got pts failed !!!! (ret 0)
[   14.289000] set ac3 to downmix
[   14.289000] set ac3plus to use_hdmi_caps
[   14.290000] set aac to downmix
[   14.290000] init ALSA!
[   14.326000] VIDEO0: first pts 0x0
[   14.372000] DVB: registering new adapter (BCM7405)
[   14.477000] enable tsm0
[   14.531000] autodetecting NIMs...
[   14.535000] ret: 2, feid: 13
[   14.535000] Found: Slot A, ID: 13 (by CA)
[   14.536000] Initializing adapter 0 (BCM4505-DVB-S2)
[   14.608000] bcm4506: found 4505, revision 0(b0)
[   14.608000] bcm4506: bcm_initAP
[   14.616000] bcm4506: upload & start firmware
[   16.781000] bcm4506: bcm4506: ap not running - start now
[   16.836000] bcm4506: uCode 0x61
[   16.854000] bcm4506: no bcm3445 detected
[   16.867000] i2c_enable_adc failed! -145
[   16.867000] DVB: registering adapter 0 frontend 0 (bcm4506)...
[   18.037000] VIDEO0: stop decode
[   18.037000] no decoder left in sync handling so disable xpt_sync
[   18.041000] registered vtuner misc/vtuner0, minor 56
[   18.050000] registered vtuner misc/vtuner1, minor 55
[   41.170000] input: dreambox remote control (native) as /devices/virtual/input/input1
[   41.183000] input: dreambox advanced remote control (native) as /devices/virtual/input/input2
[   41.214000] input: dreambox ir keyboard as /devices/virtual/input/input3
[   41.227000] input: dreambox ir mouse as /devices/virtual/input/input4
[   42.060000] cfg80211: Calling CRDA to update world regulatory domain
[   42.445000] usb 2-1: reset high-speed USB device number 2 using ehci-brcm
[   42.632000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   42.681000] Registered led device: rt2800usb-phy0::radio
[   42.685000] Registered led device: rt2800usb-phy0::assoc
[   42.694000] Registered led device: rt2800usb-phy0::quality
[   42.700000] usbcore: registered new interface driver rt2800usb
[   42.939000] 4037906 ms:
[   43.057000] 118 ms: 06
[   43.130000] 72 ms: 10
[   43.206000] using 50.00Hz as MonitorRefreshRate
[   43.306000] SET FORMAT: display[0], format=27
[   43.307000] bcm_video_analog_port_setup (fmt=7)
[   43.466000] SET FORMAT: display[1], format=7
[   43.586000] set current avs auto aspect to 16:9
[   43.587000] disable wss on display 0
[   43.587000] disable wss on display 1
[   43.595000] set sb to 3(1)
[   43.672000] VIDEO0: set blank to 0
[   43.676000] sync is off so we enable it
[   43.676000] playback!
[   43.677000] total video delay: 0 (0 ms)
[   43.681000] VIDEO0: start decode
[   43.682000] flush video decoder
[   43.738000] 607 ms: 20
[   43.746000] VIDEO0: first pts 0x0
[   43.747000] VIDEO0: framerate changed 3
[   43.747000] VIDEO0: resolution changed (1280 720)
[   43.748000] VIDEO0: aspect changed 3
[   43.749000] set current avs auto aspect to 16:9
[   43.749000] disable wss on display 0
[   43.750000] disable wss on display 1
[   43.750000] set current avs auto aspect to 16:9
[   43.751000] disable wss on display 0
[   43.751000] disable wss on display 1
[   43.752000] set sb to 3(1)
[   43.856000] VIDEO0: set blank to 0
[   43.857000] VIDEO0: stop decode
[   43.857000] VIDEO0: set blank to 0
[   43.858000] no decoder left in sync handling so disable xpt_sync
[   45.170000] 1431 ms: 30
[   45.224000] 54 ms: 40
[   48.874000] NET: Registered protocol family 10
[   50.394000] VIDEO0: set blank to 0
[   50.395000] sync is off so we enable it
[   50.395000] playback!
[   50.396000] total video delay: 0 (0 ms)
[   50.400000] VIDEO0: start decode
[   50.402000] flush video decoder
[   50.466000] VIDEO0: first pts 0x0
[   50.571000] VIDEO0: set blank to 0
[   50.598000] VIDEO0: stop decode
[   50.599000] VIDEO0: set blank to 0
[   50.599000] no decoder left in sync handling so disable xpt_sync
[   54.581000] bcm_accel: invalid opcode! 00000080
[   54.603000] bcmfb: enable manual blit
[   54.609000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
[   54.822000] CEC send ok!
[   57.198000] bcm4506: channel 0 is in normale mode now
[   57.211000] bcm4506: channel 0 is sleeping now
[   57.236000] set current avs auto aspect to 16:9
[   57.237000] disable wss on display 0
[   57.237000] disable wss on display 1
[   57.238000] set sb to 3(1)
[   57.239000] set current avs auto aspect to 16:9
[   57.240000] disable wss on display 0
[   57.240000] disable wss on display 1
[   57.241000] set sb to 3(1)
[   57.242000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
[   57.243000] set current avs auto aspect to 16:9
[   57.244000] disable wss on display 0
[   57.244000] disable wss on display 1
[   57.245000] set sb to 3(1)
[   57.246000] set current avs auto aspect to 16:9
[   57.247000] disable wss on display 0
[   57.247000] disable wss on display 1
[   57.248000] set sb to 3(1)
[   57.714000] 12490 ms: 50
[   57.719000] 4 ms: 50
[   57.788000] 69 ms: 50
[   57.825000] 36 ms: 50
[   58.062000] 237 ms: 50
[   58.278000] fe_common: retrying i2c transfer
[   58.278000] fe_common: retrying i2c transfer
[   58.279000] fe_common: retrying i2c transfer
[   58.280000] fe_common: retrying i2c transfer
[   58.280000] fe_common: retrying i2c transfer
[   58.281000] fe_common: retrying i2c transfer
[   58.281000] fe_common: retrying i2c transfer
[   58.282000] fe_common: retrying i2c transfer
[   58.283000] fe_common: retrying i2c transfer
[   58.283000] fe_common: retrying i2c transfer
[   58.284000] fe: read ret=-145
[   58.284000] bcm4506: lnb_sense_i2c_read failed!
[   58.587000] 524 ms: 50
[   58.902000] 314 ms: 51
[   58.938000] 36 ms: 52
[   58.940000] 1 ms: 52
[   58.942000] 1 ms: 52
[   59.362000] eth0: no IPv6 routers present
[   63.830000] 4888 ms: 52
[   63.858000] 28 ms: 61
[   63.988000] 130 ms: 61
[   64.075000] 87 ms: 61
[   64.104000] 28 ms: 62
[   64.117000] 13 ms: 62
[   64.119000] 2 ms: 62
[   64.121000] 2 ms: 62
[   64.156000] 35 ms: 62
[   64.178000] 21 ms: 62
[   64.340000] 161 ms: 62
[   64.342000] 2 ms: 62
[   64.356000] 13 ms: 62
[   64.668000] 312 ms: 62
[   64.679000] 11 ms: 63
[   64.700000] 20 ms: 63
[   64.702000] 2 ms: 63
[   64.705000] 3 ms: 63
[   64.715000] 10 ms: 63
[   65.734000] 1019 ms: 63
[   65.763000] 28 ms: 65
[   65.825000] 62 ms: 65
[   65.827000] 2 ms: 65
[   65.867000] 40 ms: 65
[   65.870000] 3 ms: 65
[   65.873000] 2 ms: 65
[   65.878000] 5 ms: 65
[   65.892000] 14 ms: 65
[   65.908000] 16 ms: 65
[   65.910000] 2 ms: 65
[   66.111000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
[   66.494000] 584 ms: 65
[   66.659000] 164 ms: 66
[   67.502000] 843 ms: 66
[   67.566000] set current avs auto aspect to 16:9
[   67.567000] disable wss on display 0
[   67.567000] disable wss on display 1
[   67.568000] set sb to 3(1)
[   67.568000] set current avs auto aspect to 16:9
[   67.569000] disable wss on display 0
[   67.569000] disable wss on display 1
[   67.570000] set sb to 3(1)
[   67.571000] disable wss on display 0
[   67.572000] set wss 7 on display 1
[   67.608000] set input to 0
[   67.608000] set fb to 2(0)
[   67.609000] set current avs auto aspect to 16:9
[   67.609000] disable wss on display 0
[   67.610000] set wss 7 on display 1
[   67.611000] set sb to 3(1)
[   67.613000] set ac3 to downmix
[   67.620000] 118 ms: 68
[   67.630000] 10 ms: 68
[   67.792000] 162 ms: 68
[   68.026000] 234 ms: 69
[   68.051000] 25 ms: 69
[   68.125000] 74 ms: 69
[   68.174000] 49 ms: 69
[   68.183000] 9 ms: 69
[   68.185000] 2 ms: 69
[   68.190000] 4 ms: 69
[   68.222000] 32 ms: 69
[   68.328000] 105 ms: 70
[   73.698000] 5369 ms: 70
[   73.799000] 101 ms: 80
[   74.059000] 260 ms: 80
[   74.102000] 43 ms: 81
[   75.691000] 1588 ms: 81
[   75.757000] 66 ms: 84
[   75.794000] 37 ms: 84
[   75.825000] 30 ms: 84
[   75.942000] 117 ms: 84
[   75.991000] 48 ms: 85
[   76.000000] 9 ms: 85
[   76.099000] 99 ms: 85
[   76.107000] 7 ms: 85
[   76.158000] set current avs auto aspect to 16:9
[   76.158000] disable wss on display 0
[   76.159000] set wss 7 on display 1
[   76.159000] set sb to 3(1)
[   76.161000] set current avs auto aspect to 16:9
[   76.161000] disable wss on display 0
[   76.162000] set wss 7 on display 1
[   76.162000] set sb to 3(1)
[   76.163000] disable wss on display 0
[   76.164000] set wss 7 on display 1
[   76.165000] set current avs auto aspect to 16:9
[   76.165000] disable wss on display 0
[   76.166000] set wss 7 on display 1
[   76.167000] set sb to 3(1)
[   76.171000] set current avs auto aspect to 16:9
[   76.171000] disable wss on display 0
[   76.172000] set wss 7 on display 1
[   76.172000] set sb to 3(1)
[   76.173000] set current avs auto aspect to 16:9
[   76.174000] disable wss on display 0
[   76.175000] set wss 7 on display 1
[   76.175000] set sb to 3(1)
[   76.176000] disable wss on display 0
[   76.177000] set wss 7 on display 1
[   76.178000] set current avs auto aspect to 16:9
[   76.179000] disable wss on display 0
[   76.179000] set wss 7 on display 1
[   76.180000] set sb to 3(1)
[   76.184000] set current avs auto aspect to 16:9
[   76.184000] disable wss on display 0
[   76.185000] set wss 7 on display 1
[   76.185000] set sb to 3(1)
[   76.187000] set current avs auto aspect to 16:9
[   76.187000] disable wss on display 0
[   76.188000] set wss 7 on display 1
[   76.188000] set sb to 3(1)
[   76.189000] disable wss on display 0
[   76.190000] set wss 7 on display 1
[   76.191000] set current avs auto aspect to 16:9
[   76.192000] disable wss on display 0
[   76.192000] set wss 7 on display 1
[   76.192000] set sb to 3(1)
[   76.197000] set current avs auto aspect to 16:9
[   76.197000] disable wss on display 0
[   76.198000] set wss 7 on display 1
[   76.198000] set sb to 3(1)
[   76.199000] set current avs auto aspect to 16:9
[   76.200000] disable wss on display 0
[   76.201000] set wss 7 on display 1
[   76.201000] set sb to 3(1)
[   76.203000] disable wss on display 0
[   76.203000] set wss 7 on display 1
[   76.205000] set current avs auto aspect to 16:9
[   76.206000] disable wss on display 0
[   76.206000] set wss 7 on display 1
[   76.207000] set sb to 3(1)
[   76.211000] set current avs auto aspect to 16:9
[   76.212000] disable wss on display 0
[   76.212000] set wss 7 on display 1
[   76.213000] set sb to 3(1)
[   76.215000] set current avs auto aspect to 16:9
[   76.215000] disable wss on display 0
[   76.216000] set wss 7 on display 1
[   76.216000] set sb to 3(1)
[   76.222000] set current avs auto aspect to 16:9
[   76.222000] disable wss on display 0
[   76.223000] set wss 7 on display 1
[   76.223000] set sb to 3(1)
[   76.225000] set current avs auto aspect to 16:9
[   76.225000] disable wss on display 0
[   76.226000] set wss 7 on display 1
[   76.226000] set sb to 3(1)
[   76.228000] disable wss on display 0
[   76.228000] set wss 7 on display 1
[   76.230000] set current avs auto aspect to 16:9
[   76.230000] disable wss on display 0
[   76.231000] set wss 7 on display 1
[   76.231000] set sb to 3(1)
[   76.237000] 130 ms: 85
[   76.250000] 13 ms: 85
[   76.295000] 45 ms: 85
[   76.356000] 60 ms: 85
[   76.620000] 264 ms: 86
[   76.859000] 238 ms: 86
[   76.914000] 55 ms: 86
[   77.145000] 231 ms: 86
[   77.325000] 179 ms: 87
[   77.389000] CEC send ok!
[   81.752000] 4427 ms: 87
[   83.034000] 1281 ms: 96
[   83.092000] set mute 0 (000) 1
[   83.094000] 60 ms: 99
[   83.101000] 7 ms: 99
[   83.103000] 2 ms: 99
[   83.216000] bcm4506: channel 0 is in normale mode now
[   83.324000] CIFS VFS: Error connecting to socket. Aborting operation
[   84.138000] bcm4506: rolloff 0.25 is not supported!!!!!
[   84.436000] start pcr0 on dmx 0 pid:207 index 1
[   84.438000] start audio on dmx 0 pid:63
[   84.439000] audio xpt start
[   84.439000] sync is off so we enable it
[   84.440000] demux-index 0 pcr0pid 207
[   84.440000] using 1 as pcr0 pidchannel
[   84.441000] AC3
[   84.441000] audio: streamtype set 1
[   84.442000] audio: streamtype_set: stop rave
[   84.442000] decode
[   84.443000] audio: streamtype_set: restart rave
[   84.444000] set mute 0 (111) 1
[   84.445000] audio: decoder start 2
[   84.448000] video delay 0 (0 ms)
[   84.449000] total video delay: 0 (0 ms)
[   84.450000] VIDEO0: set streamtype!
[   84.451000] set H264
[   84.451000] sw rave disabled!
[   84.452000] audio delay 18000 (200 ms)
[   84.452000] total video delay: 18000 (200 ms)
[   84.454000] start video0 on dmx 0 pid:207
[   84.455000] total video delay: 18000 (200 ms)
[   84.458000] VIDEO0: start decode
[   84.514000] bcm4506: signal_strength -120.21dbm
[   84.710000] bcm4506: signal_strength -120.77dbm
[   85.068000] bcm4506: signal_strength -119.48dbm
[   85.088000] RAP first pts 0xcd6ae33a, stc 0xb6dce5fa, pcr valid
[   85.089000] audio_cdb_itb_error_isr! underflow
[   85.093000] audio_cdb_itb_error_isr! underflow
[   85.097000] audio_cdb_itb_error_isr! underflow
[   85.101000] audio_cdb_itb_error_isr! underflow
[   85.105000] audio_cdb_itb_error_isr! underflow
[   85.109000] audio_cdb_itb_error_isr! underflow
[   85.113000] audio_cdb_itb_error_isr! underflow
[   85.117000] audio_cdb_itb_error_isr! underflow
[   85.121000] audio_cdb_itb_error_isr! underflow
[   85.125000] audio_cdb_itb_error_isr! underflow
[   85.595000] ch0: lock
[   86.074000] bcm4506: signal_strength -118.41dbm
[   86.206000] VIDEO0: first pts 0xb6df3d84
[   86.207000] VIDEO0: resolution changed (1920 1080)
[   86.367000] enable tsm0
[   87.096000] bcm4506: signal_strength -119.08dbm
[   87.506000] VIDEO0: progressive changed (0)
[   89.336000] CIFS VFS: Error connecting to socket. Aborting operation
[   89.338000] CIFS VFS: cifs_mount failed w/return code = -148
 

 

ik zie overigens wel twee "rare" dingen als ik mount uitvoer.

 

Copy & paste de hele uitvoer van "mount" eens.

 

Post ook de uitvoer van het commando "dmesg". Daar staat mogelijk in waarom je disk niet herkend wordt.

 

Mount:

root@dm800se:~# mount                                                          
rootfs on / type rootfs (rw)                                                   
/dev/root on / type jffs2 (rw,relatime)                                        
devtmpfs on /dev type devtmpfs (rw,relatime,size=67896k,nr_inodes=16974,mode=75
)                                                                              
proc on /proc type proc (rw,relatime)                                          
sysfs on /sys type sysfs (rw,relatime)                                         
tmpfs on /media type tmpfs (rw,relatime,size=64k)                              
tmpfs on /var/volatile type tmpfs (rw,relatime)                                
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620) 

Dmesg kan ik maar gedeeltelijk kopieren:

[53063.238000] audio_cdb_itb_error_isr! underflow                         
[53063.241000] ch0: lock                                                  
[53063.241000] RAP sampling rate info isr (48000)                         
[53063.241000] eModeChange Isr.. set source_changed_event!                
[53166.524000] ch0: unlock                                                
[53167.028000] ch0: lock                                                  
[53167.129000] pts_error_isr: 7 callbacks suppressed                      
[53167.129000] XVD pts error PTS 0xfe73d276, STC 0x95f9cf36, type 0       
[53167.169000] XVD pts error PTS 0xfe73d97e, STC 0x95f9d63d, type 1       
[53167.189000] XVD pts error PTS 0xfe73e086, STC 0x95f9d9c1, type 1       
[53167.249000] XVD pts error PTS 0xfe73e78e, STC 0x95f9e44d, type 1       
[53167.269000] XVD pts error PTS 0xfe73ee96, STC 0x95f9e7d2, type 1       
[53167.289000] XVD pts error PTS 0xfe73f59e, STC 0x95f9eb55, type 1       
[53167.379000] rap watchdog flush!                                        
[53167.379000] flush audio decode                                         
[53167.381000] video delay 0 (0 ms)                                       
[53167.382000] total video delay: 0 (0 ms)                                
[53167.393000] RAP first pts 0x12bf40ba6, stc 0x12bf3fb4a, pcr valid      
[53167.395000] audio_cdb_itb_error_isr! underflow                         
[53167.399000] audio_cdb_itb_error_isr! underflow                         
[53167.403000] audio_cdb_itb_error_isr! underflow                         
[53167.407000] audio_cdb_itb_error_isr! underflow                         
[53167.427000] ch0: lock                                                  
                                          
                 

Een schone flash doe ik liever niet, omdat ik alle openpli systeem instellingen redelijk naar m'n hand heb gezet. Dit kan ik natuurlijk wel backuppen met autobackup, alleen dan is de kans aanwezig dat de mount settings ook worden meegenomen.

Klopt het dat hier nog een dev/sda1 media/hdd line tussen moet

Die hoef je niet in de fstab (file system table) te zetten, dat doet de box zelf als device /dev/sda1 aanwezig is.

mount /dev/sda1 /media/hdd

had de schijf al moeten mounten, en let goed op de / voor de regels, dat maakt een wereld van verschil.