38 replies to this topic

[stevom]

Hello again,

 

Now I am able to build the latest Image 4.0 for et9x00 without error, but I need more help.

What I have to do now to build the image (or at least dvb-usb-it913x.ko) with this patch?

 

Thanks in advance!

[athoik]

You need to apply the patch on OpenPLi (top directory) and run git am or git apply

git apply < /path/to/0001-Support-Avermedia-A835B.patch 
git am < /path/to/0001-Support-Avermedia-A835B.patch 

See here more details on applying patches (and creating them): https://ariejan.net/...patch-with-git/

[loulou2000]

the version ID 07ca: 3835 works with this source or my module over the kernel compiled by against the modules will not load all alone they must be loaded with my scrypt that I added, and then your key will be detected.
the compilation is for a et9x00

 

 

 

la version ID 07ca:3835 fonctionne avec cette source ou avec mon module plus le kernel compilé,parcontre les module ne se charge pas tous seul il faut les chargé avec mon scrypt que j'ai rajouté,et ensuite votre clé sera détecté .

cette compilation est pour un et9x00

Attached Files

•  835b-et9x00.zip   4.17MB   63 downloads

[Prodge]

Hi, I have ET4000 with the latest OpenPli 4.0 updated today and Kernel version 3.14.16.

I have avermedia volar green TDT USB, I have read this, I have try all but still not recognise.

 

Someone can help me?

[athoik]

What's the output of dmesg (right after boot) and lsmod command?

[Prodge]

lsmod says this:

 

root@et4x00:~# lsmod
Module                        Size   Used by
ipv6                        348413  18
dvb_usb_af9035      13261   0
dvb_usb_v2             14862   1 dvb_usb_af9035
dvb                  6038060       34
modloader2             32993   1 dvb
modloader              22287    0
tpm                     6509          3 dvb,modloader,modloader2

 

I have installed all drivers plugins from plugins menu.

I have installed all posted in this thread.

Not recognise.

 

dmesg is large.... wich part you need?

[athoik]

Everything, save it into dmesg.log file and upload it. Also provide the output from lsusb command.

[Prodge]

put dmesg in putty telnet and save in a txt file as you said. Hope its helps.

 

 

Attached Files

•  dmesg.log   9.14KB   5 downloads

[Dimitrij]

opkg install kernel-module-fc0011
opkg install kernel-module-tua9001
opkg install kernel-module-tda18218
opkg install kernel-module-mxl5007t
opkg install kernel-module-fc2580
opkg install kernel-module-af9033
opkg install kernel-module-dvb-usb-af9035 
opkg install firmware-dvb-usb-af9035-02
opkg install kernel-module-dvb-usb

[Prodge]

opkg install kernel-module-fc0011
opkg install kernel-module-tua9001
opkg install kernel-module-tda18218
opkg install kernel-module-mxl5007t
opkg install kernel-module-fc2580
opkg install kernel-module-af9033
opkg install kernel-module-dvb-usb-af9035 
opkg install firmware-dvb-usb-af9035-02
opkg install kernel-module-dvb-usb

This will fix the problem?

I need to put these in telnet?

[Prodge]

athoik you post a patch, but I dont know How to pacth it. You have seen my dmesg log?

 

this is the lsusb you request:

 

 

root@et4x00:~# lsusb
Bus 001 Device 002: ID 1a40:0101
Bus 001 Device 003: ID 07ca:a835
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0001
Bus 001 Device 004: ID dead:beef
 

Edited by Prodge, 20 January 2015 - 20:57.

[athoik]

DVB: registering new adapter (dvb0)
platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
input: front panel as /devices/virtual/input/input2
usb 1-2: dvb_usb_v2: 2nd usb_bulk_msg() failed=-145
dvb_usb_af9035: probe of 1-2:1.0 failed with error -145
usbcore: registered new interface driver dvb_usb_af9035

 

On the dmesg log the there is an error when registering dvb-t stick, but unfortunatelly its too generic, it might be an tuner driver missing, it might be firmware missing.

 

Try the @Dima73 commands on telnet and see if something different appears on the dmesg.

[Prodge]

all was installed. nothing, still the same not recognise.

 

 

root@et4x00:~# opkg install kernel-module-fc0011
Package kernel-module-fc0011 (3.14.16-r0.1.7) installed in root is up to date.
root@et4x00:~# opkg install kernel-module-tua9001
Package kernel-module-tua9001 (3.14.16-r0.1.7) installed in root is up to date.
root@et4x00:~# opkg install kernel-module-tda18218
Package kernel-module-tda18218 (3.14.16-r0.1.7) installed in root is up to date.
root@et4x00:~# opkg install kernel-module-mxl5007t
Package kernel-module-mxl5007t (3.14.16-r0.1.7) installed in root is up to date.
root@et4x00:~# opkg install kernel-module-fc2580
Package kernel-module-fc2580 (3.14.16-r0.1.7) installed in root is up to date.
root@et4x00:~# opkg install kernel-module-af9033
Package kernel-module-af9033 (3.14.16-r0.1.7) installed in root is up to date.
root@et4x00:~# opkg install kernel-module-dvb-usb-af9035
Package kernel-module-dvb-usb-af9035 (3.14.16-r0.1.7) installed in root is up to date.
root@et4x00:~# opkg install firmware-dvb-usb-af9035-02
Package firmware-dvb-usb-af9035-02 (1.0-r0.13) installed in root is up to date.
root@et4x00:~# opkg install kernel-module-dvb-usb
Package kernel-module-dvb-usb (3.14.16-r0.1.7) installed in root is up to date.
root@et4x00:~#
 

[Dimitrij]

connect through a hub with its own power supply.

Edited by Dima73, 20 January 2015 - 21:49.

[Prodge]

I haven't  a usb hub with power. I don't know why this tdt usb avermedia volar green works perftcly in black hole images in a vu´solo and not on my Xtrend ET4000 with OpenPli.

Edited by Prodge, 20 January 2015 - 21:56.

[diceman01]

I know this thread is a bit old but this issue still persists even on VU+ boxes, but installing the it913x driver also as stated earlier fixes the issue.

[Prodge]

I'm still with no USB TDT tunner recognise.

Please someone with ET4000 and Avermedia Volar Green USB TDT and latest OpenPli with kernel 3.14.16

works with this?

 

I can't belive the mistery, thanks for all helps but is still not recognise.

I don't want to try with a usb hub with power supply. I will burn this A835 TDT tunner that only cost 20€ before.

 

How to build a Openpli patched image? someone can build with the patch for my ET4000 and sent to me? Please!!!

Edited by Prodge, 2 April 2015 - 00:06.

[Prodge]

just found a method to recognise but is not the best at all.

 

telnet:

 

modprobe dvb-usb-af9035

rmmod dvb-usb-af9035

modprobe dvb-usb-af9035

 

reboot enigma not reboot full receiver.

when reboot enigma the tdt tunner is recognise

 

but when you do a full reboot receiver again is not recognise.

[Prodge]

solved FINALLY FIXED.

adding these lines in : /usr/bin/enigma2.sh

 

 

#!/bin/sh

modprobe -r dvb-usb-af9035 &
sleep 5
modprobe  dvb-usb-af9035 &

prefix=/usr
exec_prefix=/usr

 

Now when you make a full reboot is recognise.

Edited by Prodge, 2 April 2015 - 20:53.