"ecm_delay = 1000"
No problems when look coded channels and record contents
![:)](https://forums.openpli.org/public/style_emoticons/default/smile.png)
May be someone add to "metronom" support instead "nbc" and not need do then delay?
Posted 2 October 2013 - 09:08
E2PC, Ubuntu 12.04 x86, DVB-S2 card Omicom SkyStar 4, Nvidia card 9500GT 512Mb DDR2 driver 195.36.24, Satellites 9.0E, 36.0E
Posted 8 October 2013 - 20:10
Posted 10 October 2013 - 10:43
I say already now that I was unable to install dvbsoftwareca!
Can't do compile you the module dvbsoftwareca?
Without the module oscam or any emu will not work.
install libnl2 and libnl2-dev, other libnl remove from your system,
compile the module and in thw console:
modprobe dvbsoftwareca
Create symlinks for your demux0 and dvr0:
ln -s /dev/dvb/adapter0/demux0 /dev/dvb/adapter0/demux1
ln -s /dev/dvb/adapter0/dvr0 /dev/adapter0/dvb/dvr1
E2PC, Ubuntu 12.04 x86, DVB-S2 card Omicom SkyStar 4, Nvidia card 9500GT 512Mb DDR2 driver 195.36.24, Satellites 9.0E, 36.0E
Posted 10 October 2013 - 15:07
I say already now that I was unable to install dvbsoftwareca!
Can't do compile you the module dvbsoftwareca?
Without the module oscam or any emu will not work.
install libnl2 and libnl2-dev, other libnl remove from your system,
compile the module and in thw console:
modprobe dvbsoftwareca
Create symlinks for your demux0 and dvr0:
ln -s /dev/dvb/adapter0/demux0 /dev/dvb/adapter0/demux1
ln -s /dev/dvb/adapter0/dvr0 /dev/adapter0/dvb/dvr1
hello
I tried to install your version that I have found in git.
While compiling the libraries xine-lib I get an error. I'll paste my log
Posted 10 October 2013 - 20:50
E2PC, Ubuntu 12.04 x86, DVB-S2 card Omicom SkyStar 4, Nvidia card 9500GT 512Mb DDR2 driver 195.36.24, Satellites 9.0E, 36.0E
Posted 29 October 2013 - 16:23
Hello
I hope you can help me.
When compiling OpenPLIPC with the methode from nobody9 I get under LUbuntu and Ubuntu 13.10 the following error
In file included from osd.c:30:0: /usr/include/zlib.h:1511:24: note: expected 'gzFile' but argument is of type 'struct gzFile_s **' ZEXTERN int ZEXPORT gzclose OF((gzFile file)); ^ osd.c: In function 'osd_free_object': osd.c:1697:50: warning: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to dereference it? [-Wsizeof-pointer-memaccess] memset( this->event.object.overlay, 0, sizeof(this->event.object.overlay) ); ^ osd.c: In function '_x_osd_renderer_init': osd.c:1898:46: warning: passing argument 4 of 'this->stream->xine->config->register_enum' from incompatible pointer type [enabled by default] 10, update_text_palette, this); ^ osd.c:1898:46: note: expected 'char **' but argument is of type 'const char * const*' make[2]: *** [libxine_la-osd.lo] Error 1 make[2]: Leaving directory `/home/erich/Public/OpenPLI/openpliPC/xine-lib/src/xine-engine' make[1]: *** [../src/xine-engine/libxine.la] Error 2 make[1]: Leaving directory `/home/erich/Public/OpenPLI/openpliPC/xine-lib/misc' make: *** [install-recursive] Error 1 An error occured while building xine-lib erich@ubuntu:~/Public/OpenPLI/openpliPC$
I am not a pro in Linux but tryed my best and want to succeed to be finally able to compile a plugin
GreeT`s Erich
Posted 30 October 2013 - 12:46
Hello radxnl
Can you explain me short what the patch scripts are doing?
Would like to understand it
why arnt the patches included in the scripts - I guess all people will have the same issus I had.
But after extracting xinepatch and eptrlistpatch I have now the following error
tstools.cpp:625:106: warning: format ‘%lld’ expects argument of type ‘long long int’, but argument 4 has type ‘off_t {aka long int}’ [-Wformat=] tstools.cpp:625:106: warning: format ‘%lld’ expects argument of type ‘long long int’, but argument 5 has type ‘off_t {aka long int}’ [-Wformat=] CXX volume.o CXX streamserver.o CXX ca_connector.o In file included from ca_connector.cpp:1:0: ../../lib/dvb/ca_connector.h:6:29: fatal error: netlink/netlink.h: No such file or directory #include <netlink/netlink.h> ^ compilation terminated. make[3]: *** [ca_connector.o] Error 1 make[3]: Leaving directory `/home/erich/Public/OpenPLI/openpliPC/enigma2/lib/dvb' make[2]: *** [install-recursive] Error 1 make[2]: Leaving directory `/home/erich/Public/OpenPLI/openpliPC/enigma2/lib/dvb' make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory `/home/erich/Public/OpenPLI/openpliPC/enigma2/lib' make: *** [install-recursive] Error 1 An error occured while building OpenPliPC erich@ubuntu:~/Public/OpenPLI/openpliPC$
Please guide me what to do next
thanks Erich
Posted 31 October 2013 - 08:15
like I told you - the package is not available
I read in the internet, that it may be a problem of the include path that the compiler doesnt find the lib,...
erich@ubuntu:~/Public/OpenPLI/openpliPC$ sudo apt-get install libnl2 libnl2-dev [sudo] password for erich: Reading package lists... Done Building dependency tree Reading state information... Done Package libnl2-dev is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Unable to locate package libnl2 E: Package 'libnl2-dev' has no installation candidate erich@ubuntu:~/Public/OpenPLI/openpliPC$
Some people are speaking about "pkg-config" - but I could not use it for the libnl3.
How should I set the path variables that the compiler finds the libnl3 - or how do I install the libnl2.
Do you know a source I get it from?
GreeTs Erich
Edited by eriche, 31 October 2013 - 08:17.
Posted 31 October 2013 - 09:16
Its not easy to reach the goal
I already installed yesterday the "dev" lib - but still had the same problems.
erich@ubuntu:~/Public/OpenPLI/openpliPC$ dpkg --get-selections | grep libnl libnl-3-200:amd64 install libnl-3-dev install libnl-genl-3-200:amd64 install libnl-route-3-200:amd64 install erich@ubuntu:~/Public/OpenPLI/openpliPC$
Is there a way to link the missing header file to a place where the compiler is looking for it?
Greets Erich
Posted 31 October 2013 - 09:34
maybe this helps you telling me what to do
http://stackoverflow...includes-broken
Maybe I have to edit the build scripts to tell the compiler the path to the lib?
I also read
The problem is that in one include file from the libnl3 headers, it tries to include another header and simply cannot find it (because the libnl3 path prefix is missing).
Many people seem to have problems - but I didnt read a solution
Edited by eriche, 31 October 2013 - 09:38.
Posted 4 November 2013 - 20:51
Hi Friends,
Trying this project but getting problems:
Posted 5 November 2013 - 13:53
the problem is, that the documentation is not OK
Everybody who starts from scratch will have this problems under Ubuntu.
When you read the last page (43) you will see that I had the same problem.
The user RADXNL posted 2 patches to fix this problem - but he never explained why this stuff doesn`t work out of the box.
So I don`t know if he wants to keep his knowledge for himself or doesn`t know too what this scripts are doing?
I still stuck unter Ubuntu 13 at the "Package libnl2-dev is not available" problem.
Hopefully you come further
Posted 5 November 2013 - 19:45
Posted 8 November 2013 - 14:57
Maybe the answer to my question is still posed on one of the sites, but, how can I just install ipk-files. Just copying installed plugins from box into right directory would do, not tried, but think so. Otherwise, now you can just update the title of the thread to 13.04. Working at me.
0 members, 1 guests, 0 anonymous users