ET9x00 Fehler nach Update 15.12.2011
dalmidog 15 Dec 2011
hi,
Nach dem Update heute 15.12.2011, bootet meine ET9200 nicht mehr hoch. D.h. der Pinguin ist noch sichtbar, aber danach bleibt das Bild Schwarz. Kann auch nichts ausführen.
Telnet funktioniert noch, und habe auch nochmal ein "opkg update && opkg upgrade" ausgeführt, aber auch das brachte bis jetzt nichts.
Nach dem Update heute 15.12.2011, bootet meine ET9200 nicht mehr hoch. D.h. der Pinguin ist noch sichtbar, aber danach bleibt das Bild Schwarz. Kann auch nichts ausführen.
Telnet funktioniert noch, und habe auch nochmal ein "opkg update && opkg upgrade" ausgeführt, aber auch das brachte bis jetzt nichts.
root@et9x00:~# opkg update && opkg upgrade Downloading http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/3rd-party/Packages.gz. Inflating http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/3rd-party/Packages.gz. Updated list of available packages in /var/lib/opkg/openpli-3rd-party. Downloading http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/all/Packages.gz. Inflating http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/all/Packages.gz. Updated list of available packages in /var/lib/opkg/openpli-all. Downloading http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/et9x00/Packages.gz. Inflating http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/et9x00/Packages.gz. Updated list of available packages in /var/lib/opkg/openpli-et9x00. Downloading http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/mipsel/Packages.gz. Inflating http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/mipsel/Packages.gz. Updated list of available packages in /var/lib/opkg/openpli-mipsel. root@et9x00:~# opkg update && opkg upgrade Downloading http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/3rd-party/Packages.gz. Inflating http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/3rd-party/Packages.gz. Updated list of available packages in /var/lib/opkg/openpli-3rd-party. Downloading http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/all/Packages.gz. Inflating http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/all/Packages.gz. Updated list of available packages in /var/lib/opkg/openpli-all. Downloading http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/et9x00/Packages.gz. Inflating http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/et9x00/Packages.gz. Updated list of available packages in /var/lib/opkg/openpli-et9x00. Downloading http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/mipsel/Packages.gz. Inflating http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/mipsel/Packages.gz. Updated list of available packages in /var/lib/opkg/openpli-mipsel.
Hump 15 Dec 2011
Kann ich nicht bestätigen. Box bootet nach dem heutigen Update einwandfrei. Keine Probleme.
Frogman 15 Dec 2011
Auch bei mir keinerlei Probleme nach dem Update... - weder Fehlermeldungen beim Update selbst noch beim Booten danach.
nobody9 15 Dec 2011
Hallo dalmidog,
schau mal nach ob bei dir die DVB Module geladen werden. Auf den telnet console lsmod.
Hatte bei mir unter /etc eine datei modules in dem ein falscher parameter beim dvb Module drin stand, dadurch bekammen die Module beim laden einen Segfault.
nobody9
schau mal nach ob bei dir die DVB Module geladen werden. Auf den telnet console lsmod.
Hatte bei mir unter /etc eine datei modules in dem ein falscher parameter beim dvb Module drin stand, dadurch bekammen die Module beim laden einen Segfault.
nobody9
hi,
Nach dem Update heute 15.12.2011, bootet meine ET9200 nicht mehr hoch. D.h. der Pinguin ist noch sichtbar, aber danach bleibt das Bild Schwarz. Kann auch nichts ausführen.
Telnet funktioniert noch, und habe auch nochmal ein "opkg update && opkg upgrade" ausgeführt, aber auch das brachte bis jetzt nichts.
root@et9x00:~# opkg update && opkg upgrade Downloading http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/3rd-party/Packages.gz. Inflating http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/3rd-party/Packages.gz. Updated list of available packages in /var/lib/opkg/openpli-3rd-party. Downloading http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/all/Packages.gz. Inflating http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/all/Packages.gz. Updated list of available packages in /var/lib/opkg/openpli-all. Downloading http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/et9x00/Packages.gz. Inflating http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/et9x00/Packages.gz. Updated list of available packages in /var/lib/opkg/openpli-et9x00. Downloading http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/mipsel/Packages.gz. Inflating http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/mipsel/Packages.gz. Updated list of available packages in /var/lib/opkg/openpli-mipsel. root@et9x00:~# opkg update && opkg upgrade Downloading http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/3rd-party/Packages.gz. Inflating http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/3rd-party/Packages.gz. Updated list of available packages in /var/lib/opkg/openpli-3rd-party. Downloading http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/all/Packages.gz. Inflating http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/all/Packages.gz. Updated list of available packages in /var/lib/opkg/openpli-all. Downloading http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/et9x00/Packages.gz. Inflating http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/et9x00/Packages.gz. Updated list of available packages in /var/lib/opkg/openpli-et9x00. Downloading http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/mipsel/Packages.gz. Inflating http://downloads.pli-images.org/feeds/openpli-2.1/et9x00/mipsel/Packages.gz. Updated list of available packages in /var/lib/opkg/openpli-mipsel.
dalmidog 15 Dec 2011
lsmod ergibt folgendes
root@et9x00:~# lsmod Module Size Used by zd1211rw 55901 0 usbserial 30999 0 rtl8192cu 95190 0 rtl8192c_common 56264 1 rtl8192cu rtlwifi 98198 1 rtl8192cu rtl8187 54063 0 rt73usb 24424 0 rt2800usb 13121 0 rt2800lib 45452 1 rt2800usb rt2500usb 18201 0 rt2x00usb 10969 3 rt73usb,rt2800usb,rt2500usb rt2x00lib 40230 5 rt73usb,rt2800usb,rt2800lib,rt2500usb,rt2x00usb r8712u 173309 0 ipv6 340622 14 carl9170 85327 0 ath9k_htc 63467 0 mac80211 222236 10 zd1211rw,rtl8192cu,rtl8192c_common,rtlwifi,rtl8187,rt2800lib,rt2x00usb,rt2x00lib,carl9170,ath9k_htc ath9k_common 1704 1 ath9k_htc ath9k_hw 352683 2 ath9k_htc,ath9k_common ath 17058 4 carl9170,ath9k_htc,ath9k_common,ath9k_hw modloader2 33264 0 modloader 22329 0 tpm 7873 2 modloader2,modloader
dalmidog 15 Dec 2011
unter /etc habe ich und drin stehen, alle sind vom 15.12.2011:
modules
modules.conf
modules.conf.old
Edited by dalmidog, 15 December 2011 - 13:24.
modules
### This file is automatically generated by update-modules" # # Please do not edit this file directly. If you want to change or add # anything please take a look at the files in /etc/modutils and read # the manpage for update-modules. # ### update-modules: start processing /etc/modutils/_et9x00 tpm modloader modloader2 dvb use_advanced_remote=0 ### update-modules: end processing /etc/modutils/_et9x00 ### update-modules: start processing /etc/modutils/ath9k_htc ath9k_htc ### update-modules: end processing /etc/modutils/ath9k_htc ### update-modules: start processing /etc/modutils/carl9170 carl9170 ### update-modules: end processing /etc/modutils/carl9170 ### update-modules: start processing /etc/modutils/ipv6 ipv6 ### update-modules: end processing /etc/modutils/ipv6 ### update-modules: start processing /etc/modutils/r8712u r8712u ### update-modules: end processing /etc/modutils/r8712u ### update-modules: start processing /etc/modutils/rt2500usb rt2500usb ### update-modules: end processing /etc/modutils/rt2500usb ### update-modules: start processing /etc/modutils/rt2800usb rt2800usb ### update-modules: end processing /etc/modutils/rt2800usb ### update-modules: start processing /etc/modutils/rt73usb rt73usb ### update-modules: end processing /etc/modutils/rt73usb ### update-modules: start processing /etc/modutils/rtl8187 rtl8187 ### update-modules: end processing /etc/modutils/rtl8187 ### update-modules: start processing /etc/modutils/rtl8192cu rtl8192cu ### update-modules: end processing /etc/modutils/rtl8192cu ### update-modules: start processing /etc/modutils/usbserial usbserial ### update-modules: end processing /etc/modutils/usbserial ### update-modules: start processing /etc/modutils/zd1211rw zd1211rw ### update-modules: end processing /etc/modutils/zd1211rw
modules.conf
### This file is automatically generated by update-modules" # # Please do not edit this file directly. If you want to change or add # anything please take a look at the files in /etc/modutils and read # the manpage for update-modules. #
modules.conf.old
### This file is automatically generated by update-modules" # # Please do not edit this file directly. If you want to change or add # anything please take a look at the files in /etc/modutils and read # the manpage for update-modules. #
Edited by dalmidog, 15 December 2011 - 13:24.
Dimitrij 15 Dec 2011
Just edit the file /etc/modutils/_et9x00 like this:
tpm
modloader
modloader2
dvb
then give the command:
update-modules
and reboot.
Dann entfernen Sie das Plug-in-Plugins dvboptions
Edited by Dima73, 15 December 2011 - 13:31.
tpm
modloader
modloader2
dvb
then give the command:
update-modules
and reboot.
Dann entfernen Sie das Plug-in-Plugins dvboptions
Edited by Dima73, 15 December 2011 - 13:31.
Dimitrij 15 Dec 2011
In den Telnet-Befehl:
update-modules
Und es gibt, zeigen die Ausgabe
cat /etc/modutils/_et9x00
update-modules
Und es gibt, zeigen die Ausgabe
cat /etc/modutils/_et9x00
dalmidog 15 Dec 2011
root@et9x00:~# update-modules root@et9x00:~# cat /etc/modutils/_et9x00 tpm modloader modloader2 dvbroot@et9x00:~#
Dimitrij 15 Dec 2011
tpm
modloader
modloader2
dvb
In den Telnet-Befehl:
update-modules
reboot
Edited by Dima73, 15 December 2011 - 14:31.
modloader
modloader2
dvb
In den Telnet-Befehl:
update-modules
reboot
Edited by Dima73, 15 December 2011 - 14:31.
nobody9 15 Dec 2011
es fehlt das return nach dem dvb.
und du solltest
update-modules -f
aufrufen sonst meint er es ist schon aktuell.
Edited by nobody9, 15 December 2011 - 14:32.
und du solltest
update-modules -f
aufrufen sonst meint er es ist schon aktuell.
Edited by nobody9, 15 December 2011 - 14:32.
daddelfalk 15 Dec 2011
Hi,
this Option is no illegal with latest ET-Drivers:
use_advanced_remote=0
so remove it from /etc/modutils/_et9x00 File
and do Command: update-modules
on telnet, after that reboot your STB.
Edited by daddelfalk, 15 December 2011 - 14:32.
this Option is no illegal with latest ET-Drivers:
use_advanced_remote=0
so remove it from /etc/modutils/_et9x00 File
and do Command: update-modules
on telnet, after that reboot your STB.
Edited by daddelfalk, 15 December 2011 - 14:32.
dalmidog 15 Dec 2011
zur Zeit steht das drin.
/etc/modutils/_et9x00
/etc/modules
habe dann update-modules gemacht und die et9200 neu gestartet.
Leider startet Sie nicht.
Edited by dalmidog, 15 December 2011 - 14:34.
/etc/modutils/_et9x00
tpm modloader modloader2 dvb
/etc/modules
### This file is automatically generated by update-modules" # # Please do not edit this file directly. If you want to change or add # anything please take a look at the files in /etc/modutils and read # the manpage for update-modules. # ### update-modules: start processing /etc/modutils/_et9x00 tpm modloader modloader2 dvb ### update-modules: end processing /etc/modutils/_et9x00 ### update-modules: start processing /etc/modutils/ath9k_htc ath9k_htc ### update-modules: end processing /etc/modutils/ath9k_htc ### update-modules: start processing /etc/modutils/carl9170 carl9170 ### update-modules: end processing /etc/modutils/carl9170 ### update-modules: start processing /etc/modutils/ipv6 ipv6 ### update-modules: end processing /etc/modutils/ipv6 ### update-modules: start processing /etc/modutils/r8712u r8712u ### update-modules: end processing /etc/modutils/r8712u ### update-modules: start processing /etc/modutils/rt2500usb rt2500usb ### update-modules: end processing /etc/modutils/rt2500usb ### update-modules: start processing /etc/modutils/rt2800usb rt2800usb ### update-modules: end processing /etc/modutils/rt2800usb ### update-modules: start processing /etc/modutils/rt73usb rt73usb ### update-modules: end processing /etc/modutils/rt73usb ### update-modules: start processing /etc/modutils/rtl8187 rtl8187 ### update-modules: end processing /etc/modutils/rtl8187 ### update-modules: start processing /etc/modutils/rtl8192cu rtl8192cu ### update-modules: end processing /etc/modutils/rtl8192cu ### update-modules: start processing /etc/modutils/usbserial usbserial ### update-modules: end processing /etc/modutils/usbserial ### update-modules: start processing /etc/modutils/zd1211rw zd1211rw ### update-modules: end processing /etc/modutils/zd1211rw
habe dann update-modules gemacht und die et9200 neu gestartet.
Leider startet Sie nicht.
Edited by dalmidog, 15 December 2011 - 14:34.
daddelfalk 15 Dec 2011
Hi,
post complete output from Command "dmesg" just after a fresh reboot.
post complete output from Command "dmesg" just after a fresh reboot.
dalmidog 15 Dec 2011
ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42 ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42 Broadcom STB NAND controller (BrcmNand Controller) bcmemac: Broadcom STB 10/100 EMAC driver v3.0 bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:16:b4:03:f0:fd) bcmemac: not registering interface #1 at 0x10090000 (no PHY detected) usbcore: registered new interface driver zd1201 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver brcm-pm: enabling usb clocks ehci-brcm ehci-brcm.0: Broadcom STB EHCI ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1 ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300 ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ehci-brcm ehci-brcm.1: Broadcom STB EHCI ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2 ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500 ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-brcm ohci-brcm.0: Broadcom STB OHCI ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3 ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci-brcm ohci-brcm.1: Broadcom STB OHCI ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4 ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600 ata1: SATA link down (SStatus 4 SControl 300) hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mousedev: PS/2 mouse device common for all mice i2c /dev entries driver lirc_dev: IR Remote Control driver registered, major 254 IR NEC protocol handler initialized IR RC5(x) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized IR RC5 (streamzap) protocol handler initialized IR MCE Keyboard/mouse protocol handler initialized IR LIRC bridge handler initialized Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb usbcore: registered new interface driver usbhid usbhid: USB HID core driver ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 17 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' EBI CS1: setting up NAND flash (primary) mtd->oobsize=0, mtd->eccOobSize=0 NAND_CS_NAND_XOR=00000000 B4: NandSelect=50000200, nandConfig=16152300, chipSelect=1 brcmnand_read_id: CS1: dev_id=ecda1095 After: NandSelect=50000200, nandConfig=16152300 Block size=00020000, erase shift=17 NAND Config: Reg=16152300, chipSize=256 MB, blockSize=128K, erase_shift=11 busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff timing1 not adjusted: 5363444f timing2 not adjusted: 00000fc6 eccLevel=15, 1Ksector=0, oob=16 nbrBitsPerCell=2, cellinfo=0, chip->cellinfo=00000000 <--brcmnand_set_acccontrol: acc b4: d7ff1010, after: d7ff1010 BrcmNAND mfg ec da Samsung K9F2G08U0A 256MB on CS1 Found NAND on CS1: ACC=d7ff1010, cfg=16152300, flashId=ecda1095, tim1=5363444f, tim2=00000fc6 BrcmNAND version = 0x0302 256MB @00000000 B4: NandSelect=50000200, nandConfig=16152300, chipSelect=1 brcmnand_read_id: CS1: dev_id=ecda1095 After: NandSelect=50000200, nandConfig=16152300 Found NAND flash on Chip Select 1, chipSize=256MB, usable size=256MB, base=0 brcmnand_scan: B4 nand_select = 50000200 brcmnand_scan: After nand_select = 50000200 page_shift=11, bbt_erase_shift=17, chip_shift=28, phys_erase_shift=17 Brcm NAND controller version = 3.2 NAND flash size 256MB @10000000 ECC layout=brcmnand_oob_bch4_4k brcmnand_scan: mtd->oobsize=64 brcmnand_scan: oobavail=50, eccsize=512, writesize=2048 brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3 -->brcmnand_default_bbt brcmnand_default_bbt: bbt_td = bbt_main_descr Bad block table Bbt0 found at page 0001ffc0, version 0x01 for chip on CS1 Bad block table 1tbB found at page 0001ff80, version 0x01 for chip on CS1 nand_read_bbt: Bad block at 0x00760000 nand_read_bbt: Bad block at 0x01440000 nand_read_bbt: Bad block at 0x01800000 nand_read_bbt: Bad block at 0x042e0000 nand_read_bbt: Bad block at 0x0bd20000 nand_read_bbt: Bad block at 0x0d1e0000 Adjust partition complete size from entire device to ff00000 to avoid overlap wi th BBT reserved space Adjust partition rootfs size from entire device to f900000 to avoid overlap with BBT reserved space Creating 3 MTD partitions on "brcmnand.0": 0x000000000000-0x00000ff00000 : "complete" 0x000000000000-0x000000600000 : "kernel" 0x000000600000-0x00000ff00000 : "rootfs" turn off boot console uart0 usb 2-1: new high-speed USB device number 2 using ehci-brcm turn off boot console early0 UBI: attaching mtd2 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 126976 bytes UBI: smallest flash I/O unit: 2048 UBI: VID header offset: 2048 (aligned 2048) UBI: data offset: 4096 hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-6: LaCie HardDrive Quadra, 1AG01118, max UDMA/133 ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA LaCie HardDriv 1AG0 PQ: 0 ANSI: 5 sd 1:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 1:0:0:0: [sda] Attached SCSI disk usb 2-1.2: new full-speed USB device number 3 using ehci-brcm UBI: max. sequence number: 3517 UBI: attached mtd2 to ubi0 UBI: MTD device name: "rootfs" UBI: MTD device size: 249 MiB UBI: number of good PEBs: 1986 UBI: number of bad PEBs: 6 UBI: number of corrupted PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 0 UBI: total number of reserved PEBs: 1986 UBI: number of PEBs reserved for bad PEB handling: 19 UBI: max/mean erase counter: 4/2 UBI: image sequence number: 426623593 UBI: background thread "ubi_bgt0d" started, PID 40 Warning: unable to open an initial console. UBIFS: recovery needed UBIFS: recovery completed UBIFS: mounted UBI device 0, volume 0, name "rootfs" UBIFS: file system size: 247857152 bytes (242048 KiB, 236 MiB, 1952 LEBs) UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: lzo UBIFS: reserved for root: 0 bytes (0 KiB) VFS: Mounted root (ubifs filesystem) on device 0:12. Freeing unused kernel memory: 260k freed kjournald starting. Commit interval 5 seconds EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is recommen ded EXT3-fs (sda1): using internal journal EXT3-fs (sda1): recovery complete EXT3-fs (sda1): mounted filesystem with writeback data mode usbcore: registered new interface driver tpm modloader2: module license 'PROPRIETARY' taints kernel. Disabling lock debugging due to kernel taint do_cpu invoked from kernel context![#1]: Cpu 1 $ 0 : 00000000 10008b00 00000000 00000000 $ 4 : e0146000 00000001 e0142ab0 ffffffff $ 8 : 00000004 00000000 81000218 cfe58000 $12 : 00000001 2ad7d2bb f7537e82 000003ab $16 : 806f0000 00000001 00000000 806f0000 $20 : e0146000 00000022 00000550 00000124 $24 : 4e0811a1 80013d10 $28 : cf598000 cf599e20 80070fd4 80001450 Hi : 00000001 Lo : 328bf3c0 epc : e0146008 modloader2_init+0x8/0x80 [modloader2] Tainted: P ra : 80001450 do_one_initcall+0x40/0x1f8 Status: 10008b03 KERNEL EXL IE Cause : 1080002c PrId : 0002a044 (Brcm4380) Modules linked in: modloader2(P+) tpm Process modprobe (pid: 87, threadinfo=cf598000, task=cfda0da0, tls=7759b490) Stack : cf64fe80 00000009 0000000a cf5bc800 e0142af8 e0142ab0 00000001 8005ce38 e0142ab0 00000001 80680000 cf64fb00 00000001 00000022 00000550 80072e2c cfda0da0 77584000 cf599f30 80011384 e0142abc 8140fb60 cfda0dd8 e0140024 00000006 00000000 00000000 00000000 00000000 e0131000 00009564 e01387bc e013868c e01394fc cfdc1d80 00007e00 00008070 00000000 00000000 00000020 ... Call Trace: [<e0146008>] modloader2_init+0x8/0x80 [modloader2] [<80001450>] do_one_initcall+0x40/0x1f8 [<80072e2c>] sys_init_module+0x174/0x1528 [<8000ecfc>] stack_done+0x20/0x40 Code: (Bad address in epc) ---[ end trace 4c58457fcc754913 ]--- usbcore: registered new interface driver ath9k_htc usbcore: registered new interface driver carl9170 NET: Registered protocol family 10 r8712u: module is from the staging directory, the quality is unknown, you have b een warned. usbcore: registered new interface driver r8712u usbcore: registered new interface driver rt2500usb usbcore: registered new interface driver rt2800usb usbcore: registered new interface driver rt73usb usbcore: registered new interface driver rtl8187 usbcore: registered new interface driver rtl8192cu usbcore: registered new interface driver usbserial USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core usbcore: registered new interface driver zd1211rw Console: switching to colour dummy device 80x25 eth0: no IPv6 routers present root@et9x00:~#
Edited by dalmidog, 15 December 2011 - 14:45.
daddelfalk 15 Dec 2011
Hi,
use attached File replace with yours and do
update-modules -f
use attached File replace with yours and do
update-modules -f
Attached Files
dalmidog 15 Dec 2011
Hi,
use attached File replace with yours and do
update-modules -f
Danke, Box startet, es geht wieder
Ich entferne nun das Plugins dvboptions !
Dimitrij 15 Dec 2011
Sie können setzen die neue Version.
Es sei denn du hast Angst .
http://openpli.org/f...post__p__238579
Edited by Dima73, 15 December 2011 - 15:23.
Es sei denn du hast Angst .
http://openpli.org/f...post__p__238579
Edited by Dima73, 15 December 2011 - 15:23.