Dorfkind

Schon, aber die Oscam davor lief ohne Key3588. Und ich wüsste auch nicht wo ich den herkriege.

Niemand außer mir mit dem Problem? Kann ich fast nicht glauben...

Hab ich die falsche Oscam-Version? Aber die war vom Feed und ein Update wird nicht angeboten...

Ich habe ein sehr ähnliches Problem nach dem Update meiner HD51 auf OpenPLI 9.0
Die aus dem Feed installierte Version OSCam: 1.30 Build: r11764@344ea3ee funktioniert nicht mehr mit meiner HD+ Karte HD04

In der alten Version hatte ich Keys für folgende Felder:

mod1
data50
mod50
key60
exp60
nuid
cwekey

und alles funktionierte. Die neue Version möchte aber Keys für die Felder

mod1

mod2

key3588

key3460

key3310

data50
mod50

idird

nuid

wovon ich die meisten nicht habe...

Und im Log steht dann

 

1970/01/01 01:00:13 00000000 s     (main) Host name      = hd51
1970/01/01 01:00:13 00000000 s     (main) Release        = 4.10.12
1970/01/01 01:00:13 00000000 s     (main) Version        = #1 SMP Tue Aug 1 21:12:30 UTC 2023
1970/01/01 01:00:13 00000000 s     (main) Machine        = armv7l
1970/01/01 01:00:13 00000000 s     (main) Stb model      = hd51
1970/01/01 01:00:13 00000000 s     (main) Stb boxtype    = hd51
1970/01/01 01:00:13 00000000 s     (main) The current system time is smaller than the build date (Apr 15 2024). Waiting up to 60 seconds for time to correct
2024/05/04 15:29:52 00000000 s     (main) creating pidfile /tmp/oscam.pid with pid 2095
2024/05/04 15:29:52 00000000 s   (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2024/05/04 15:29:52 00000000 s     (main) signal handling initialized
2024/05/04 15:29:52 00000000 s   (config) 10 provid's loaded
2024/05/04 15:29:52 00000000 s   (config) 164 service-id's loaded in 1 ms
2024/05/04 15:29:52 00000000 s      (net) cs378x: initialized (fd=3, port=12005)
2024/05/04 15:29:52 00000000 s   (reader) lower_card [internal] creating thread for device /dev/sci0
2024/05/04 15:29:52 00000000 s     (main) waiting for local card init
2024/05/04 15:29:52 3BDF170C r   (reader) lower_card [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2024/05/04 15:29:52 3BDF170C r   (reader) lower_card [internal] Reader sci internal, detected box type: hd51
2024/05/04 15:29:52 65CFE8CD h    (webif) webif: decompressed 193496 bytes back into 418152 bytes
2024/05/04 15:29:52 65CFE8CD h    (webif) HTTP Server running. ip=:: port=8081
2024/05/04 15:29:53 3BDF170C r   (reader) lower_card [internal] card detected
2024/05/04 15:29:53 3BDF170C r   (reader) lower_card [internal] ATR: xx xx xx xx xx xx xx xx  
2024/05/04 15:29:54 3BDF170C r   (reader) lower_card [internal] detected card in CAK7 mode
2024/05/04 15:29:54 3BDF170C r   (reader) lower_card [internal] Initial AES: xx xx xx xx xx xx xx
2024/05/04 15:29:55 3BDF170C r   (reader) lower_card [internal] Rom revision: DNASP420 RevS60
2024/05/04 15:29:55 3BDF170C r   (reader) lower_card [internal] no key3588 defined
2024/05/04 15:29:55 3BDF170C r   (reader) lower_card [internal] card system not supported
2024/05/04 15:29:55 3BDF170C r   (reader) lower_card [internal] Normal mode failed, reverting to Deprecated Mode
2024/05/04 15:29:55 3BDF170C r   (reader) lower_card [internal] ATR: xx xx xx xx xx xx 
2024/05/04 15:30:05 3BDF170C r   (reader) lower_card [internal] Warning: Card returned error on setting ifsd value to 251
2024/05/04 15:30:05 3BDF170C r   (reader) lower_card [internal] detected card in CAK7 mode
2024/05/04 15:30:05 3BDF170C r   (reader) lower_card [internal] Initial AES: xx xx xx xx xx xx 
2024/05/04 15:30:06 3BDF170C r   (reader) lower_card [internal] Rom revision: DNASP420 RevS60
2024/05/04 15:30:06 3BDF170C r   (reader) lower_card [internal] no key3588 defined
2024/05/04 15:30:06 3BDF170C r   (reader) lower_card [internal] card system not supported
2024/05/04 15:30:06 3BDF170C r   (reader) lower_card [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
2024/05/04 15:30:06 3BDF170C r   (reader) lower_card [internal] card initializing error

Wie krieg ich das wieder ans Laufen?

Danke!

Thanks for clarification. But how can I see whether a skin is running with my Pli-Version or not?

There a are lot of skins in the feed saying "Openpli 4 or 3". Will they still run in up-to-date Pli-Versions?

What about the other skins here discussed in this section of the forum, lets say "PLi-DarkOS Skin"?

Does it only work in OpenPli 9, not in 8.3?