49 replies to this topic

[WanWizard]

Again, how?

[mrvica]

play the movie, >|| pause it, then try >> (one or more times)

[Pr2]

I don't understand why are you willing to watch live channels in slow motion, this will requires that your box will buffers all the stream to allow you to watch live channel in slow motion and this is impossible.

So this make sens that it only work with already recorded channels or in timeshift since the buffer is then done on disk.

 

Enable permanent timeshift if you really need this feature. A timeshift is just a recording that is played live or with a timeshift.

[piplan1966]

Hi
I have started recording a movie with a timer of 5 minutes,
Toricarding automatically stopped when 5 minutes were completed,
Then I played the movie and hit the pause button,
Then press the 2-arrow button on the remote to play slow motion at 1/8.

[WanWizard]

That is interesting, if I press <<, it reverses at x2, x4, x8, etc, and if I press >>, it forwards x2, x4, x8, etc... No option to play something in slow-motion ?

[ims]

That is interesting, if I press <<, it reverses at x2, x4, x8, etc, and if I press >>, it forwards x2, x4, x8, etc... No option to play something in slow-motion ?

The film must be paused. Then >> is 1/8, 1/4, 1/2 and then >> is not x2, x4, x8 ...

[WanWizard]

Finally just an answer to my question!

 

If I do that, << doesn't do anything, seems to do slow motion forward, but the skin doesn't display it. So that's something needs fixing.

[piplan1966]

Hi
When I press this >> the speed is very fast,
When I press this<<, the speed is completely slowed down,
I think every receiver has their own method.

[WanWizard]

Then you press >> without pausing it first.

 

That was the mistake I made too.

[ims]

Finally just an answer to my question!

 

If I do that, << doesn't do anything, seems to do slow motion forward, but the skin doesn't display it. So that's something needs fixing.

PLiFullHD displaying 1/8, 1/4, 1/2 for me.

[piplan1966]

I don't understand why are you willing to watch live channels in slow motion, this will requires that your box will buffers all the stream to allow you to watch live channel in slow motion and this is impossible.
So this make sens that it only work with already recorded channels or in timeshift since the buffer is then done on disk.
 
Enable permanent timeshift if you really need this feature. A timeshift is just a recording that is played live or with a timeshift.

I@ims mentioned that you can do the same with direct satlahit channel,
I thought it would be good to learn this skill too.
but failed,

[WanWizard]

PLiFullHD displaying 1/8, 1/4, 1/2 for me.

 

I run Scarthgap test images, using DarkOS.

 

I@ims mentioned that you can do the same with direct satlahit channel,
I thought it would be good to learn this skill too.

 

Like it has been said several times, you can not alter anything with a live broadcast, that is the definition of live, it has a fixed timing.

 

So if you want to play a live broadcast in slow-motion, you must have timeshift configured, after which you can press Pause to stop the live broadcast. After which you can use >> to start slow-motion, while it is paused.

[piplan1966]

Then you press >> without pausing it first.
 
That was the mistake I made too.

If I don't press pause it presses << 2x 4x 8x 16x 32x last 128x the video speeds up like a ship,
If I press pause and then press this<<, the video starts slow burning at /8,
When I press < it returns to its original speed,

[piplan1966]

PLiFullHD displaying 1/8, 1/4, 1/2 for me.

 
I run Scarthgap test images, using DarkOS.
 

I@ims mentioned that you can do the same with direct satlahit channel,
I thought it would be good to learn this skill too.

 
Like it has been said several times, you can not alter anything with a live broadcast, that is the definition of live, it has a fixed timing.
 
So if you want to play a live broadcast in slow-motion, you must have timeshift configured, after which you can press Pause to stop the live broadcast. After which you can use >> to start slow-motion, while it is paused.

In short, can you explain to me the timeshift configuration, how to do it?
Best wishes

[WanWizard]

If you press pause, and it pauses, it works.

 

In general, if you have local storage for recordings, no configuration is needed. If you don't, or it can be found, you need to configure the recording location ( menu, setup, system, expert settings, recording path ).

[piplan1966]

see this

Attached Files

•  Capture.PNG   40.41KB   0 downloads

[WanWizard]

If you have a local disk, that's fine. So pressing pause should freeze the broadcast and start the timeshift recording.

[piplan1966]

By local disk you mean [USB]
I have

[Pr2]

When you access your USB did you go with the path:  /media/hdd or via the path /media/usb

 

You need to specify the path where your USB is mounted for timeshift to be effective. So if you have nothing attached to /media/hdd then you probably have no timeshift (with you current setup mentionned on the screenshot).

[piplan1966]

#36 When I save the screenshot I have given in the post, I get an error message,