#1
Posted 5 March 2010 - 15:01
I have enabled parental control on my VU+ and selected channels to block in Dreambox Edit.
All is fine.
Just wondering if there is any way to actually hide the channels when the lock is on.
This is for 2 reasons 1: when you are flicking through channels you can see the adult channels on the list and it doesnt look the best when others see it.
Also when you are doing a channel hop and you get a locked channel you get the password entry screen.
Also whats the function of the blacklist and the whitelist.
D
Re: Parental Control #2
Posted 5 March 2010 - 15:51
Blacklist = only channels in the blacklist need a pin, the rest is open
Whitelist = only channels in the whitelist can be seen without pin, the rest is blocked (until pin entered)
Awooga!!!
Vu+ Solo 4K [19.2E/23.5E/28.2E]
Vu+ Duo
Re: Parental Control #3
Re: Parental Control #4
Posted 13 April 2010 - 14:01
Did anyone have any luck with this.
when you are flicking through channels you can see the adult channels on the list and it doesnt look the best when others all the channels listed with 100% babes, Northern Birds, Asian Sluts etc in the channels list.
Having them locked is fine but not seeing them at all is preferable until the parental lock is disabled as when zapping you have to deal with the password popup even though you are only zapping.
Is this the way it works on all images.
D
Re: Parental Control #5
Posted 13 April 2010 - 15:38
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Parental Control #6
Re: Parental Control #7
Posted 13 April 2010 - 16:56
Unfortunately, they violate the open sources rules by keeping the modifications to themselfs, so even if they did, there is no way for us to get the source...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Parental Control #8
Posted 14 April 2010 - 09:35
Is it worth emailing VUPLUS on http://vuplus.com/?page_id=9 .
How is enigma2 managed.
Is the original version in VU+ a modded version of Enigma2 to suit their hardware.
Then is openpli a modded version of original enigma2 with openpli tweaks and updates from openpli and VU+.
Im trying to see where features are added. (Enigma, VU+ or OpenPLi.)
There are a few bits in Enigma1 that were good (this being one) and who decided to leave them out Enigma2 team, VU+ or openPLI.
BTW - Its a sign of a good combination of VU+, Enigma2 and OpenPLi when we are not talking about major stability and reliability issues but on cosmetic issues.
Well Done to all.
Re: Parental Control #9
Posted 14 April 2010 - 10:24
So, it's the "original" version that runs on all boxes, we just apply patches to it for the PLi specifics.
To answer your question, changes need to be pushed to the original developers (but they hardly accept any third-party changes), or applied to an OpenPLi image thru a patch in our git repository. Until we're ready to fork, after which we can directly modify the code to our liking.
If you have any changes, please provide them in the form of a diff, we will be happy to include them after a quality check...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Parental Control #10
Posted 14 April 2010 - 12:01
Its good to see how it all comes together.
So VU+ official changes that pli uses are per say patches applied to original enigma2 through the software update..
How does that work for items supported on say DM 8000 that are not on the VU+ (the LCD from what I read is different).
Are different pli "patches" applied to different boxes but still enigma2.
Re: Parental Control #11
Re: Parental Control #12
Posted 14 April 2010 - 12:10
Having them locked is fine but not seeing them at all is preferable until the parental lock is disabled as when zapping you have to deal with the password popup even though you are only zapping.
Is this the way it works on all images.
D
ONLY for the E1 boxes as stated before
Re: Parental Control #13
Posted 14 April 2010 - 17:11
But I agree with dfdream that this is a much needed (and often requested, even back in the 7025 days) feature for E2! I know you don't have nosy kids, but my 10 year old is quite curious.
And with the 'hide' feature, we also need the menu option to enter the lock code. Now, E2 prompts for the parental lock code when you zap to a channel that is locked. Which is no longer possible when it is hidden...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Parental Control #14
Also tagged with one or more of these keywords: VU+DUO
Dateiformat .m4k nicht lesbar.Started by Gummivernichter, 28 Mar 2020 Vu+Duo, m4k, Dateiformat, OpenPLi |
|
|||
Webif benaderen via telefoonStarted by Tw-er, 15 Feb 2017 Vu+Duo |
|
|||
Autotimer goneStarted by jort38, 9 Feb 2016 VU+DUO |
|
|||
Stream vanaf http://www.watchdartsforfree.tk/ naar Vu+duoStarted by wieckbud1, 29 Nov 2015 VU+Duo |
|
|||
Toch geen clean installStarted by Alain_sat, 15 Jan 2015 VU+Duo |
|
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users