5 replies to this topic

[cubalibre00]

Hi,
last night I flesh my InetBox 800 HD PVR with a PLi image because someone had told me that is more powerful then Gemini 5.1.
I run the flash via browser and in a hurry I forgot to flash again with the SSL76F.
Then I thought .... I flash via RS232, as I had done before.
I start my DreamUP 1.3.3.4, connect and then the power to the DreamBox ... but nothing ... DreamUP does not recognize anything ... does not seem to connect.

I tried with Enforcer.exe enabled and DreamUP 1.3.3.4, but nothing...my DreamBox is not recognized.
Do you have a solution ...

At work we have a SIM programmer, if I remove the Sim from the DreamBox, have I any solution to recover it ?

Thanks for the support,
Alessandro

Attached Files

•  immagine.png   16.81KB   4 downloads

[PaphosAL]

Is your COM1 a proper IRQ 9 pin RS232, or are you using a USB > RS232 converter?

Cheers- AL

[cubalibre00]

Yes...is nullmodem cable.

[xener]

is your receiver dreambox or inetbox ?

[cubalibre00]

It's an InetBox.

[Henksat]

It's an InetBox.

As you know, The PLi Team don`t support clones or similair boxes.
You`re problem is not a PLi Image related problem, so this topic will be closed.