Jump to content


Adblock Plus
Advertising seems to be blocked by your browser.

Please notice that advertising helps us to cover the cost of hosting the project.

If you find these ads displayed intrusive or inappropriate, please contact the webmaster.
Photo

DVB-T

ET9000

  • Please log in to reply
54 replies to this topic

#1 Dimitrij

  • PLi® Core member
  • 10,415 posts

+355
Excellent

Posted 3 June 2011 - 06:08

Prompt 100% working stick DVB-T.

Re: DVB-T #2 malakudi

  • Senior Member
  • 1,449 posts

+69
Good

Posted 3 June 2011 - 07:28

I currently use a Siano chipset dvb-t stick which is very cheap in Greek market (Crypto Redi PC100 - 18 euros) and works fine. Driver is smsusb/smsdvb

Re: DVB-T #3 stanley1

  • Member
  • 36 posts

0
Neutral

Posted 3 June 2011 - 10:48

Hauppauge Nova-T

Re: DVB-T #4 Dimitrij

  • PLi® Core member
  • 10,415 posts

+355
Excellent

Posted 3 June 2011 - 13:42

I currently use a Siano chipset dvb-t stick which is very cheap in Greek market (Crypto Redi PC100 - 18 euros) and works fine. Driver is smsusb/smsdvb

Thank you.
You can link to this model.

Re: DVB-T #5 littlesat

  • PLi® Core member
  • 57,642 posts

+709
Excellent

Posted 7 June 2011 - 18:09

Do you have instructions how to install the Nova-T DVB-T USB stick?

Re: DVB-T #6 stanley1

  • Member
  • 36 posts

0
Neutral

Posted 7 June 2011 - 19:09

plugins > download plugins > drivers > dvb-usb-dib0700 (1.0-r1), restart

Re: DVB-T #7 Dimitrij

  • PLi® Core member
  • 10,415 posts

+355
Excellent

Posted 7 June 2011 - 19:16

http://cgi.ebay.com/...505708932704995

Re: DVB-T #8 patje57

  • Member
  • 3 posts

0
Neutral

Posted 14 June 2011 - 13:04

plugins > download plugins > drivers > dvb-usb-dib0700 (1.0-r1), restart


installed the drivers that way, tuner config shows the Nova-T stick as C tuner, however when i scan (manual or automatic) for channels, 0 channels are found.
on pc with same antenna, all available channels are recognized.

What i'm doing wrong on the ET9000? Did i miss something obvious?

Thanks,
Pat

Re: DVB-T #9 stanley1

  • Member
  • 36 posts

0
Neutral

Posted 14 June 2011 - 13:34

you have to configure nova-t for your local transmitter, eg my transmitter is Three Rock which is, frequency 73800 and Bandwidth 8MHz., go to Service Searching > Manual Scan > Tuner C, enter valuea I have given and press OK to scan.I am in Ireland so you need to check what values you have to enter from your service supplier.

Re: DVB-T #10 volk2003

  • Member
  • 13 posts

0
Neutral

Posted 14 June 2011 - 15:04

I have Kworld USB DVBT 395U stick

I know from this page http://www.linuxtv.o.../Afatech_AF9015
that this is AF9015 chipset.
I have downloaded drivers from PLi (ET5000), restarted, but the second tuner doesn't appear.
May be somebody know about it?

Re: DVB-T #11 Dimitrij

  • PLi® Core member
  • 10,415 posts

+355
Excellent

Posted 17 June 2011 - 19:36

root@et9000:/# dmesg | grep -i "dvb"
input: Afatech DVB-T 2 as /class/input/input0
input: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-ehci-brcm-1.1
DVB: registering new adapter (dvb0)
DVB: registering adapter 0 frontend 0 (DVB-S2)...
DVB: registering adapter 0 frontend 1 (DVB-S2)...
dvb_usb_af9015: probe of 2-1.1:1.0 failed with error -1
usbcore: registered new driver dvb_usb_af9015
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[code][/code]root@et9000:/# lsusb
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 004: ID dead:beef
Bus 002 Device 003: ID 15a4:9016
Bus 002 Device 002: ID 1a40:0101
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 1307:0163 Transcend Information, Inc.
Bus 001 Device 001: ID 0000:0000
root@et9000:/# cat /proc/bus/usb/devices

................
T:  Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=15a4 ProdID=9016 Rev= 2.00
S:  Manufacturer=Afatech
S:  Product=DVB-T 2
S:  SerialNumber=010101010600001
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=01 Driver=usbhid
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=64ms

.............................
root@et9000:/# lsmod
Module			   Size  Used by
dvb_usb_af9015	    28336  0
tda18271			56592  1 dvb_usb_af9015
af9013			  21776  1 dvb_usb_af9015
mxl5007t			10128  1 dvb_usb_af9015
dvb_pll			 10128  1 dvb_usb_af9015
mc44s803			 3648  1 dvb_usb_af9015
mt2060			   5584  1 dvb_usb_af9015
tda18218			 5072  1 dvb_usb_af9015
mxl5005s			32896  1 dvb_usb_af9015
dvb_usb			 18640  1 dvb_usb_af9015
qt1010			   6480  1 dvb_usb_af9015
usbserial		    33152  0
rt73			   298544  0
ipv6			   302736  14
dvb			   4665408  30
modloader2		   35152  0
modloader		    23632  0
tpm				 9552  2 modloader2,modloader
dvb_core		    102960  2 dvb_usb,dvb
cdfs			    30176  0

Help!

Re: DVB-T #12 Dimitrij

  • PLi® Core member
  • 10,415 posts

+355
Excellent

Posted 23 June 2011 - 16:14

Vendor=15a4 ProdID=9016 Rev= 2.00
Manufacturer=Afatech
Product=DVB-T 2

This DVB-T 2 operates on the image of Egami without any problems.
You can get it to work and at PLI?

http://depositfiles....files/jsfoi7wfp

Re: DVB-T #13 malakudi

  • Senior Member
  • 1,449 posts

+69
Good

Posted 25 June 2011 - 08:13

af9015 drivers have a compile issue with default -O2 optimization. They work if compiled with -O0. I still haven't fixed that properly. Other images compile 2 times all the modules, one with -O0 and they save af9015/af9035 modules, then delete all, then compile again with -O2. This is not elegant, I want to fix the code to work with -O2 but haven't succeeded yet.

Re: DVB-T #14 Dimitrij

  • PLi® Core member
  • 10,415 posts

+355
Excellent

Posted 25 June 2011 - 17:17

af9015 drivers have a compile issue with default -O2 optimization. They work if compiled with -O0. I still haven't fixed that properly. Other images compile 2 times all the modules, one with -O0 and they save af9015/af9035 modules, then delete all, then compile again with -O2. This is not elegant, I want to fix the code to work with -O2 but haven't succeeded yet.

I do not know how to compile the driver.
What do I do now? Other owners also needed.
I'm not the only one.

Re: DVB-T #15 anchel

  • Senior Member
  • 69 posts

+1
Neutral

Posted 1 July 2011 - 13:16

Here also same problemm .. how to compile -o0 -o2 ...

Cheers,
Michel

Mutant HD500c, Xtrend ET9000, VU+ duo,  VU+ duo2, VU+ ultimo 4k en dm800 (allen met OpenPLi) * Visiosat G4 - Alps quatro & Triax - triplelnb quatro * in het verleden DM 500c, 7020 & 7025

iptv met eigen TVheadend server * tinc vpn * Netgear R7000 met Tomato


Re: DVB-T #16 Dimitrij

  • PLi® Core member
  • 10,415 posts

+355
Excellent

Posted 2 July 2011 - 16:55

Help compile the driver for the dvb-usb_af9015.
OpenPLi-2.0-beta-et9000

Re: DVB-T #17 xtrendmaster

  • Member
  • 8 posts

0
Neutral

Posted 7 July 2011 - 14:38

im joining the request too

Re: DVB-T #18 Dimitrij

  • PLi® Core member
  • 10,415 posts

+355
Excellent

Posted 7 July 2011 - 19:30

I was able to configure dvb-t af9015, but the picture freezes after 10 seconds.

Re: DVB-T #19 leor

  • Member
  • 13 posts

0
Neutral

Posted 7 July 2011 - 21:56

How did you configure it, I can't even get de stick started.
VU+ Ultimo 3X DVB-C, VU+Duo, Xtrend ET5000 en een Philips DSR7121 voor als alles mis gaat en de vrouw TV wil kijken.

Re: DVB-T #20 Dimitrij

  • PLi® Core member
  • 10,415 posts

+355
Excellent

Posted 8 July 2011 - 06:03

I pulled the driver out of Egami.
The problem is that Pli drivers are loaded very early and 80% of the stick is not defined.



Also tagged with one or more of these keywords: ET9000

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users