Jump to content


Photo

DVB-T

ET9000

  • Please log in to reply
54 replies to this topic

#1 Dimitrij

  • PLi® Core member
  • 10,379 posts

+354
Excellent

Posted 3 June 2011 - 06:08

Prompt 100% working stick DVB-T.

Re: DVB-T #2 malakudi

  • Senior Member
  • 1,449 posts

+69
Good

Posted 3 June 2011 - 07:28

I currently use a Siano chipset dvb-t stick which is very cheap in Greek market (Crypto Redi PC100 - 18 euros) and works fine. Driver is smsusb/smsdvb

Re: DVB-T #3 stanley1

  • Member
  • 36 posts

0
Neutral

Posted 3 June 2011 - 10:48

Hauppauge Nova-T

Re: DVB-T #4 Dimitrij

  • PLi® Core member
  • 10,379 posts

+354
Excellent

Posted 3 June 2011 - 13:42

I currently use a Siano chipset dvb-t stick which is very cheap in Greek market (Crypto Redi PC100 - 18 euros) and works fine. Driver is smsusb/smsdvb

Thank you.
You can link to this model.

Re: DVB-T #5 littlesat

  • PLi® Core member
  • 57,437 posts

+708
Excellent

Posted 7 June 2011 - 18:09

Do you have instructions how to install the Nova-T DVB-T USB stick?

Re: DVB-T #6 stanley1

  • Member
  • 36 posts

0
Neutral

Posted 7 June 2011 - 19:09

plugins > download plugins > drivers > dvb-usb-dib0700 (1.0-r1), restart

Re: DVB-T #7 Dimitrij

  • PLi® Core member
  • 10,379 posts

+354
Excellent

Posted 7 June 2011 - 19:16

http://cgi.ebay.com/...505708932704995

Re: DVB-T #8 patje57

  • Member
  • 3 posts

0
Neutral

Posted 14 June 2011 - 13:04

plugins > download plugins > drivers > dvb-usb-dib0700 (1.0-r1), restart


installed the drivers that way, tuner config shows the Nova-T stick as C tuner, however when i scan (manual or automatic) for channels, 0 channels are found.
on pc with same antenna, all available channels are recognized.

What i'm doing wrong on the ET9000? Did i miss something obvious?

Thanks,
Pat

Re: DVB-T #9 stanley1

  • Member
  • 36 posts

0
Neutral

Posted 14 June 2011 - 13:34

you have to configure nova-t for your local transmitter, eg my transmitter is Three Rock which is, frequency 73800 and Bandwidth 8MHz., go to Service Searching > Manual Scan > Tuner C, enter valuea I have given and press OK to scan.I am in Ireland so you need to check what values you have to enter from your service supplier.

Re: DVB-T #10 volk2003

  • Member
  • 13 posts

0
Neutral

Posted 14 June 2011 - 15:04

I have Kworld USB DVBT 395U stick

I know from this page http://www.linuxtv.o.../Afatech_AF9015
that this is AF9015 chipset.
I have downloaded drivers from PLi (ET5000), restarted, but the second tuner doesn't appear.
May be somebody know about it?

Re: DVB-T #11 Dimitrij

  • PLi® Core member
  • 10,379 posts

+354
Excellent

Posted 17 June 2011 - 19:36

root@et9000:/# dmesg | grep -i "dvb"
input: Afatech DVB-T 2 as /class/input/input0
input: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-ehci-brcm-1.1
DVB: registering new adapter (dvb0)
DVB: registering adapter 0 frontend 0 (DVB-S2)...
DVB: registering adapter 0 frontend 1 (DVB-S2)...
dvb_usb_af9015: probe of 2-1.1:1.0 failed with error -1
usbcore: registered new driver dvb_usb_af9015
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[code][/code]root@et9000:/# lsusb
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 004: ID dead:beef
Bus 002 Device 003: ID 15a4:9016
Bus 002 Device 002: ID 1a40:0101
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 1307:0163 Transcend Information, Inc.
Bus 001 Device 001: ID 0000:0000
root@et9000:/# cat /proc/bus/usb/devices

................
T:  Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=15a4 ProdID=9016 Rev= 2.00
S:  Manufacturer=Afatech
S:  Product=DVB-T 2
S:  SerialNumber=010101010600001
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=01 Driver=usbhid
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=64ms

.............................
root@et9000:/# lsmod
Module			   Size  Used by
dvb_usb_af9015	    28336  0
tda18271			56592  1 dvb_usb_af9015
af9013			  21776  1 dvb_usb_af9015
mxl5007t			10128  1 dvb_usb_af9015
dvb_pll			 10128  1 dvb_usb_af9015
mc44s803			 3648  1 dvb_usb_af9015
mt2060			   5584  1 dvb_usb_af9015
tda18218			 5072  1 dvb_usb_af9015
mxl5005s			32896  1 dvb_usb_af9015
dvb_usb			 18640  1 dvb_usb_af9015
qt1010			   6480  1 dvb_usb_af9015
usbserial		    33152  0
rt73			   298544  0
ipv6			   302736  14
dvb			   4665408  30
modloader2		   35152  0
modloader		    23632  0
tpm				 9552  2 modloader2,modloader
dvb_core		    102960  2 dvb_usb,dvb
cdfs			    30176  0

Help!

Re: DVB-T #12 Dimitrij

  • PLi® Core member
  • 10,379 posts

+354
Excellent

Posted 23 June 2011 - 16:14

Vendor=15a4 ProdID=9016 Rev= 2.00
Manufacturer=Afatech
Product=DVB-T 2

This DVB-T 2 operates on the image of Egami without any problems.
You can get it to work and at PLI?

http://depositfiles....files/jsfoi7wfp

Re: DVB-T #13 malakudi

  • Senior Member
  • 1,449 posts

+69
Good

Posted 25 June 2011 - 08:13

af9015 drivers have a compile issue with default -O2 optimization. They work if compiled with -O0. I still haven't fixed that properly. Other images compile 2 times all the modules, one with -O0 and they save af9015/af9035 modules, then delete all, then compile again with -O2. This is not elegant, I want to fix the code to work with -O2 but haven't succeeded yet.

Re: DVB-T #14 Dimitrij

  • PLi® Core member
  • 10,379 posts

+354
Excellent

Posted 25 June 2011 - 17:17

af9015 drivers have a compile issue with default -O2 optimization. They work if compiled with -O0. I still haven't fixed that properly. Other images compile 2 times all the modules, one with -O0 and they save af9015/af9035 modules, then delete all, then compile again with -O2. This is not elegant, I want to fix the code to work with -O2 but haven't succeeded yet.

I do not know how to compile the driver.
What do I do now? Other owners also needed.
I'm not the only one.

Re: DVB-T #15 anchel

  • Senior Member
  • 69 posts

+1
Neutral

Posted 1 July 2011 - 13:16

Here also same problemm .. how to compile -o0 -o2 ...

Cheers,
Michel

Mutant HD500c, Xtrend ET9000, VU+ duo,  VU+ duo2, VU+ ultimo 4k en dm800 (allen met OpenPLi) * Visiosat G4 - Alps quatro & Triax - triplelnb quatro * in het verleden DM 500c, 7020 & 7025

iptv met eigen TVheadend server * tinc vpn * Netgear R7000 met Tomato


Re: DVB-T #16 Dimitrij

  • PLi® Core member
  • 10,379 posts

+354
Excellent

Posted 2 July 2011 - 16:55

Help compile the driver for the dvb-usb_af9015.
OpenPLi-2.0-beta-et9000

Re: DVB-T #17 xtrendmaster

  • Member
  • 8 posts

0
Neutral

Posted 7 July 2011 - 14:38

im joining the request too

Re: DVB-T #18 Dimitrij

  • PLi® Core member
  • 10,379 posts

+354
Excellent

Posted 7 July 2011 - 19:30

I was able to configure dvb-t af9015, but the picture freezes after 10 seconds.

Re: DVB-T #19 leor

  • Member
  • 13 posts

0
Neutral

Posted 7 July 2011 - 21:56

How did you configure it, I can't even get de stick started.
VU+ Ultimo 3X DVB-C, VU+Duo, Xtrend ET5000 en een Philips DSR7121 voor als alles mis gaat en de vrouw TV wil kijken.

Re: DVB-T #20 Dimitrij

  • PLi® Core member
  • 10,379 posts

+354
Excellent

Posted 8 July 2011 - 06:03

I pulled the driver out of Egami.
The problem is that Pli drivers are loaded very early and 80% of the stick is not defined.



Also tagged with one or more of these keywords: ET9000

3 user(s) are reading this topic

0 members, 3 guests, 0 anonymous users