54 replies to this topic

[pieterg]

why did you use the 2.0 firmware file?
Didn't the 2.1 v4l-firmware package work? (It should contain the same firmware files)

[littlesat]

Here at least no problems with a Nova-T stick....

[Dimitrij]

why did you use the 2.0 firmware file?
Didn't the 2.1 v4l-firmware package work? (It should contain the same firmware files)

I did not know where to look, thanks for the tip.
But it remains a problem, it was at 2.0.
DVBT tuner is through time.
In 5 cases out of 10.
I'll take the log with the com-port, where you will see an error loading the driver.

[Dimitrij]

I'll take the log with the com-port, where you will see an error loading the driver.

The device is not always initialized.
On the driver's all right.

[jcldl]

I have an et9000 with an openpli 2.1 image installed, I baught avertv volar black HD A850. I installed drivers af9015, but my usb DVB-T is not seen, I have no DVB-T tuner as C. Do you know what I can do;
thanks

[Dimitrij]

Driver 100% of the workers.
Show command output in telnet:
lsmod
dmesg | grep-i "dvb"

[J-J]

Hello. I try to get working AverTV Volar GreenHD (af9035 chipset). After installing v4l-dvb-module-dvb-usb-af9035 I get an error:


 
modprobe dvb-usb-af9035
FATAL: Error inserting dvb_usb_af9035 (/lib/modules/2.6.31-3.2/kernel/drivers/media/dvb/dvb-usb/dvb-usb-af9035.ko): Unknown symbol in module, or unknown parameter (see dmesg)


dmesg





rtusb init --->usbcore: registered new interface driver rt2870usbcore: registered new interface driver rt73usbusbcore: registered new interface driver rtl8187usbcore: registered new interface driver usbserialUSB Serial support registered for genericusbcore: registered new interface driver usbserial_genericusbserial: USB Serial Driver coredvb_usb_af9035: Unknown symbol mxl5007t_attachdvb_usb_af9035: Unknown symbol af9033_attachdvb_usb_af9035: Unknown symbol tda18218_attachdvb_usb_af9035: Unknown symbol tua9001_attachdvb_usb_af9035: Unknown symbol dvb_usb_device_initdvb_usb_af9035: Unknown symbol dvb_usb_device_exitusbcore: registered new interface driver r871x_usb_drvusbcore: registered new interface driver zd1211rwdvb_usb_af9035: Unknown symbol mxl5007t_attachdvb_usb_af9035: Unknown symbol af9033_attachdvb_usb_af9035: Unknown symbol tda18218_attachdvb_usb_af9035: Unknown symbol tua9001_attachdvb_usb_af9035: Unknown symbol dvb_usb_device_initdvb_usb_af9035: Unknown symbol dvb_usb_device_exit


Can anybody help me?


(Latest Openpli 2.1, et9000)

[Dimitrij]

Just scattered in folders.
Then telnet in the command:
update-modules
And a complete reboot.

[J-J]

This kernel module have many dependencies. I have resolved a problem installing plugin from openpli feeed for af9015 and than package for af9035.

But driver not working.

[Dimitrij]

This kernel module have many dependencies. I have resolved a problem installing plugin from openpli feeed for af9015 and than package for af9035.

But driver not working.

I have everything working.
With that package that I posted above.

[DrAk3]

Hi all!
i tryed to put the attached file above into my 9x00 but my dvb-t af9035 doesn't work also after the reboot.

This is the error i received into dmesg:


dvb_usb_af9035: Unknown symbol af9033_attach
dvb_usb_af9035: Unknown symbol tua9001_attach

I'm also try to install the v4l-dvb-module-dvb-usb-af9035 package...

any idea to solve this problem?

thanks a lot

D.

[pieterg]

install af9033 and tua9001 as well
(opkg list *af9033*, opkg install, etc)

[DrAk3]

Ok now the system has identified the DVB-T.. BUT when I'm trying to make a transponder scan i received the following errors in dmesg:


dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb-usb (please define a log prefix): recv bulk message failed:-145
af9033: I2C read failed reg:0047
dvb-usb (please define a log prefix): recv bulk message failed:-145
af9033: I2C read failed reg:0045
dvb-usb (please define a log prefix): recv bulk message failed:-145
af9033: I2C read failed reg:0045
dvb-usb (please define a log prefix): recv bulk message failed:-145
af9033: I2C read failed reg:0045

Any ideas?

regards

D.

[maigais]

the question of whether someone is working snr scale on OpenPLi-2.1-beta-dm800
the drivers TDA18218HN and AF9015A ?

[arko7]

Hi,

can anybody confirm well working DVB-T USB tuners on OpenPLi 3.0 with 3.1.1 kernel?
I am using VU+ UNO h/w and looking for stable DVB-T USB tuner.

regards,