572 replies to this topic

[sfasf]

Thanks christophecvr! Worked well..

Please somebody remove that obsolete patch from the repo..

[christophecvr]

At All dm8000 orig builds pli4 back ok no need anymore for ddts-removal patch pacth.

 

Off course update git first.

[littlesat]

Ik have a new PC with fresh installed UBUNTU... and from the begin I get this issue.. someone any idea???

fam@fam-All-Series:~/openpli$ MACHINE=ET10000 make image
Building image for ET10000
ERROR:  OE-core's config sanity checker detected a potential misconfiguration.
    Either fix the cause of this error or at your own risk disable the checker (see sanity.conf).
    Following is the list of potential problems / advisories:

    Please set a valid MACHINE in your local.conf or environment

ERROR: Execution of event handler 'check_sanity_eventhandler' failed
make: *** [image] Fout 1
fam@fam-All-Series:~/openpli$

Edited by littlesat, 27 April 2014 - 11:02.

[betacentauri]

Try
MACHINE=et10000 make image
If that don't work try
export MACHINE=et10000
make image

[christophecvr]

Ter info.

 

I do now have ubuntu 14.04. Some extra issues about it . The base document is updated.

 

By me all ok no problem for vuduo2 or dm8000.

 

QUICK-SETUP-DOCUMENT

 

 

 

 

 

 

[christophecvr]

Ter info

 

I know this has nothing to do with pli self but for those who also devellop and compiling there own image think very ussefull to know.

 

For users using 12.04 with gnome 3 (as main os). I well suggest to remain at 12.04 for the time . As the mather off fact consider long before moving to an other desktop then gnome3. And certainly do not use gnome 3.12 but stick to 3.10.

 

Why ?

 

First small note if You're happy with unity ok no problem (I find unity a disaster and have headach as soon i see it , that's personal off course)

 

Gnome 3 well all menu are just gone,

 - nautilus almost no functionallity anymore there are ways around all really unusable unhandy time consuming My beloved file browser becomes a nightmare.

   solution install nemo file browser then back ok

- Gedit into base 14.04 with (gnome 3.10) still ok do not go to gnome-3.12 as it renders gedit also whitout menu's and unusable.

   No alternatif found which is as good the gedit. gedit into 3.10 is still ok.

- Evince no menu it's a pestifull pain in the ass now Due to the fact that acroread drops linux developpement its not avbl anymore  no alternatif .

  for acroread you still can go to there website and install the latest avbl version for linux but it's midlle aged now and only 32 bits.

  For evince i'm still looking for good alternatif.

 

Certainly do not try the upstage gnome 3.12 it does continousely occopie the processor synaptic not working (crashing computer). Extremely slow . with other words it 's completely unstable and all gnome uitlity's do not have menu anymore

this make them usseless.

 

I have now have the very last gnome version that I ever will use and I'm condisdering moving to other desktop-shell now i'm check for xfce. as I do not like kde at all. Possibly I even will drop ubuntu completely in future.

 

Before moving to ubuntu lts higher then 12.04 whach out and consider other desktop then gnome 3.

[Persian Prince]

hi

 

i just installed ubuntu 14.04 LTS x64 with all updates

 

now i wanna test the new OE Core but i have a strange problem which i'm not sure about it

 

*** Manual patch resolution mode ***
Dropping to a shell, so patch rejects can be fixed manually.
Run "quilt refresh" when patch is corrected, press CTRL+D to exit.

The topmost patch autoheader-nonfatal-warnings.patch needs to be refreshed first.
persianprince@e2pe:/media/persianprince/Linux/PE-Core/build/tmp/work/x86_64-linux/autoconf-native/2.69-r11/autoconf-2.69$

 

*** Manual patch resolution mode ***
Dropping to a shell, so patch rejects can be fixed manually.
Run "quilt refresh" when patch is corrected, press CTRL+D to exit.

Applying patch autoheader-nonfatal-warnings.patch
patching file bin/autoheader.in
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
1 out of 1 hunk ignored -- saving rejects to file bin/autoheader.in.rej
mkdir: cannot create directory '.pc/autoheader-nonfatal-warnings.patch': File exists
Applied patch autoheader-nonfatal-warnings.patch (forced; needs refresh)
persianprince@e2pe:/media/persianprince/Linux/PE-Core/build/tmp/work/x86_64-linux/autoconf-native/2.69-r11/autoconf-2.69$ 

 

what's wrong with autoconf ?

[Persian Prince]

i think i just fixed the problem (wrong copy from OE Alliance i think)

[ehenderichs]

I am new to openpli development and trying to get a working developement environment.

 

I followed http://users.telenet...npliubuntu.html in the hope to build an image for et9x00. However the build gives errors about undefined references in argp-help.o (see attachment for complete error log). It seems al object files needed are located are available: 

 

ehenderi@ehenderi-desktop:~/openpli40/openpli-oe-core$ find -name "argp-fmtstream.o"

./build/tmp/work/mips32el-oe-linux/eglibc/2.19-r0/build-mipsel-oe-linux/argp/argp-fmtstream.o

./build/tmp/work/x86_64-linux/cross-localedef-native/2.19-r0/build/argp-fmtstream.o

 

ehenderi@ehenderi-desktop:~/openpli40/openpli-oe-core$ find -name "argp-help.o"

./build/tmp/work/mips32el-oe-linux/eglibc/2.19-r0/build-mipsel-oe-linux/argp/argp-help.o

./build/tmp/work/x86_64-linux/cross-localedef-native/2.19-r0/build/argp-help.o

 

All suggestions are welcome. Thanks in advance

 

Edit: I am on a fresh ubuntu 14.04 installation.

Edited by ehenderichs, 13 November 2014 - 00:23.

[ehenderichs]

 

I followed http://users.telenet...npliubuntu.html in the hope to build an image for et9x00. However the build gives errors about undefined references in argp-help.o (see attachment for complete error log). It seems al object files needed are located are available: 

 

 

I notice there is no logfile attached to my post. I will post the error logs later today. 

 

Yesterday I tried building an image for other machine type, but this also fails with "undefined references in argp-help.o". 

[betacentauri]

We need error log. I guess some package is missing on your box.

[christophecvr]

Just did build.

 

First update off current image with updated git OK.

 

To be shure I did a complete fresh build from scratch. Then cross compiler and all tools related to build are build.

 

dm8000 image ok vuduo2 image ok.

[ehenderichs]

We need error log. I guess some package is missing on your box.

I understand, I forgot to click "Attach This File". So now errorlog should be attached. Any advice is welcome. Thanks in advance.

Attached Files

•  errorlog.zip   2.86KB   4 downloads

[christophecvr]

Log zegt niet veel.

 

Ik raad je aan van eerst de volledige openpli-oe-core te verwijderen.

 

Je pc up daten. zie goed dat je de bitbake (voor ubuntu 14.04 ) manueel installeerd. Install all de packages voor ubuntu 14.04 (niet deze van 12.04 lijn).

 

Reboot je pc niet echt nodig maar na een update is het wel aangeraden.

 

Cloon opniew

bouw opnieuw.

Als het faalt bewoon gewoon nog eens zonder meer (meestal is het dan wel ok).

Nog niet ok.

Verwijder het verantwoordelijk package. met MACHINE= <uwmachine> bitbake -b <package.bb>  -f -c cleanall

 

en bouw dan het image opniew. Doorgaans werkt dit zéér goed.

[betacentauri]

As there was a big change yesterday (http://forums.openpl...grade-tomorrow/) I would propose to delete the whole build directory and make an "make update" in the openpli-oe-core directory. Then restart build.

[athoik]

A fix is required for giflib with the never OE.

Most probably within the day will it will be done

[christophecvr]

Log zegt niet veel.

 

Ik raad je aan van eerst de volledige openpli-oe-core te verwijderen.

 

Je pc up daten. zie goed dat je de bitbake (voor ubuntu 14.04 ) manueel installeerd. Install all de packages voor ubuntu 14.04 (niet deze van 12.04 lijn).

 

Reboot je pc niet echt nodig maar na een update is het wel aangeraden.

 

Cloon opniew

bouw opnieuw.

Als het faalt bewoon gewoon nog eens zonder meer (meestal is het dan wel ok).

Nog niet ok.

Verwijder het verantwoordelijk package. met MACHINE= <uwmachine> bitbake -b <package.bb>  -f -c cleanall

 

en bouw dan het image opniew. Doorgaans werkt dit zéér goed.

Sorry I just noticed that I've written in Dutch

 

The log does not say much

 

I advice to remove the complete openpli-oe-core.

 

Update You're pc. Check that You did the manual install of bitbake like told into the thread. Install all packages from the line 14.04 (not 12.04)

 

Reboot You pc . Not always needed but well adviced after upgrade.

 

Clone again

rebuild again.

 

If it fails just simply try to build a second time (often it's ok then).

 

Still not ok

 

remove the quilty package with MACHINE= <machine> bitbake -b <package.bb>  -f -c clean

 

build again. Mostly it's ok then.

[betacentauri]

Well, don't delete sources folder (sources can be reused without problems). Move folder to other place before deleting the whole openpli-oe-core directory and move it back after cloning.

[christophecvr]

Well, don't delete sources folder (sources can be reused without problems). Move folder to other place before deleting the whole openpli-oe-core directory and move it back after cloning.

That's right and the reason why I explained in http://users.telenet...npliubuntu.html manual . To set sources outsite off openpli-oe-core . And how to adapt site.conf to point to the sources folder .

[ehenderichs]

Quick thx for all the replies. Will started with new info and keep you posted.