131 replies to this topic

[druciak]

I've got VU+ DUO and Bravia EX500. It worked before for me as you described - turn on worked, turn off didn't. Last time VU+ released new drivers with some HDMI-CEC fixes and from that time turn off works as well.
So I guess there might be a problem with ET-9000 drivers as well, but I may be wrong.

[Carl]

I've got VU+ DUO and Bravia EX500. It worked before for me as you described - turn on worked, turn off didn't. Last time VU+ released new drivers with some HDMI-CEC fixes and from that time turn off works as well.
So I guess there might be a problem with ET-9000 drivers as well, but I may be wrong.

VU+ adjust the code to work simular as ET drivers. This adjustment from VU+ was allready inside the ET drivers.

Better try to update the TV as on many TV it works good.

Edited by Carl, 22 November 2011 - 10:21.

[Dimitrij]

I have a Samsung TV and et9000.
Samsung is not automatically turned off.
Tried all the settings.
Can be a real problem with the drivers?

[druciak]

Better try to update the TV as on many TV it works good.

What a brilliant advice!

[Dimitrij]

I have a Samsung TV and et9000.
Samsung is not automatically turned off.
Tried all the settings.

Turn off the native Samsung remote control:
eHdmiCEC: received message 36

Translate the tuner in standby mode, Samsung included:
eHdmiCEC: send message 36
eHdmiCEC: send message 36
setLCDBrightness 51
eHdmiCEC: received message 00 36 04

TV will not turn off.
Who can help?Maybe there is a solution then?

[pieterg]

eHdmiCEC: received message 00 36 04

the tv sends a feature abort: "I do not support the standby command"

[pieterg]

(or actually, reason 04 = refused, so it might be supported, but ignored by the tv in the current mode or setting)

[Dimitrij]

(or actually, reason 04 = refused, so it might be supported, but ignored by the tv in the current mode or setting)

Anynet+(HDMI-CEC): yes
Auto Turn Off:on
Connected to the TV only et9000.


In any case, thanks for the explanation of the error.

[Autodelta]

HDMI CEC is working fine on my VU-Duo with Philips 40FPL7605H i can use the Philips remote to control the Duo.
VU-Solo with 40PFL5606H only power button and volume are working good

[tam2010]

Hello,

my AV Receiver have problems with HDMI CEC. Standby works good. But when i put the Box in deepstandby the AV Receiver is stil on. When i turn on the Box (deepstandby and standby) the AV Receiver goes on too.

[daddelfalk]

Hi,

a simple add to function :

def onEnterDeepStandby(self, configElement):
if config.hdmicec.enabled.value:
if config.hdmicec.control_tv_deepstandby.value:
self.sendMessage(0, "standby")
with

if config.hdmicec.control_receiver_standby:
self.sendMessage(5, "standby")
should do the Job.

Attached Files

•  HdmiCec-AVR-Deepstandby-Support.zip   377bytes   97 downloads

Edited by daddelfalk, 19 December 2011 - 13:32.

[tam2010]

Hi,

a simple add to function :

def onEnterDeepStandby(self, configElement):
if config.hdmicec.enabled.value:
if config.hdmicec.control_tv_deepstandby.value:
self.sendMessage(0, "standby")
with

if config.hdmicec.control_receiver_standby:
self.sendMessage(5, "standby")
should do the Job.

Hello,

and where must i write this?

[daddelfalk]

Hi,

i have attached a Patch (above), maybe tomorrow it will be included and delivered with Online-Update.

Edited by daddelfalk, 19 December 2011 - 14:32.

[tam2010]

One word. Awesome!
Thnaks

Edited by tam2010, 19 December 2011 - 13:40.

[daddelfalk]

Hi,

just drop attached file /usr/lib/enigma2/python/Components/ and restart E2.GUI.

After that remove source file HdmiCec.py, so that only the HdmiCec.pyo remains.

Let me know, if it works for you.

Attached Files

•  HdmiCec.zip   2.21KB   115 downloads

Edited by daddelfalk, 19 December 2011 - 14:47.

[tam2010]

Hi,

just drop attached file /usr/lib/enigma2/python/Components/ and restart E2.GUI.

After that remove source file HdmiCec.py, so that only the HdmiCec.pyo remains.

Let me know, if it works for you.

Thanks, it works very fine.

[tam2010]

After a update the fix is gone. Can you update the HdmiCec.pyo please?

[daddelfalk]

Hi tam2010,

i suggest that my Patch above must be commited to git, otherwise you must always keep the HdmiCec.py Source to resist Online-Updates. But it's not recommended way, as when further change will be done you simply won't get them anymore.

[dylantje]

After a update the fix is gone. Can you update the HdmiCec.pyo please?

I have the same problem.
Is there a fixx?

I have a samsung led, and it working fine.
Bud update PLI the are not coupled any more.
I have the set the tv a gain then everthing is working fine.

Is there someting i do wrong?

Bud it is a GREAT plugin.
And i like the work that you all made..
Thanks.

[daddelfalk]

Hi,

my Patch posted above needs just to be commited to the git, then everything retains after performing Online-Updates