Hello,
I've installed from the download web interface old, did not work, then I tried enigma2-plugin-extensions-webinterface_experimental-git3334 from this board, did not work. So what I am doing wrong guys. On 2.0 everything was fine, 2.1 not. I need interface for iphone app and for web browser on PC. without webinterface I only can return to 2.0.
Any help ?
I;ve found few threaded but all on Dutch and German language, it is hard to understand what is the solution there.
5 replies to this topic
Re: Web interface 2.1 does not work, need help #2
Re: Web interface 2.1 does not work, need help #3
Posted 26 August 2011 - 21:10
Take a look at this post http://www.pli-image...938#post_209938
The ipk mentioned in that post is specially for the VU+ Duo including the webbouqueteditor.
First remove the (old)webinterface and eventually the bouqueteditor and install the ipk.
That should do the trick
The ipk mentioned in that post is specially for the VU+ Duo including the webbouqueteditor.
First remove the (old)webinterface and eventually the bouqueteditor and install the ipk.
That should do the trick
Re: Web interface 2.1 does not work, need help #4
Posted 4 September 2011 - 13:04
Hi.
I havde been searching, but can not find any instructions in how to install the *ipk file, which I have downloaded from the dutch tread....
I have only found some info in dutch, which is not for me :-)
Can someone please give the instructions in english ??
Regards
Novac
I havde been searching, but can not find any instructions in how to install the *ipk file, which I have downloaded from the dutch tread....
I have only found some info in dutch, which is not for me :-)
Can someone please give the instructions in english ??
Regards
Novac
Re: Web interface 2.1 does not work, need help #5
Posted 4 September 2011 - 13:20
There are a few ways to install an IPK, 2 of them are:
first:
copy the ipk to an USB stick, place the stick in your receiver, wait a few seconds till there is some reaction from your receiver something about: install extensions
Press OK and press OK again to select the pluging, choose install.
Second
Start telnet i.e. DCC_E2
Copy the IPK to /home/root/ on your receiver
Give the command opkg install *.ipk
But there's also the webinterface on the feed which is somewhat older but still suitable for most purposes, the name of this webinterface is:
webinterface-old
first:
copy the ipk to an USB stick, place the stick in your receiver, wait a few seconds till there is some reaction from your receiver something about: install extensions
Press OK and press OK again to select the pluging, choose install.
Second
Start telnet i.e. DCC_E2
Copy the IPK to /home/root/ on your receiver
Give the command opkg install *.ipk
But there's also the webinterface on the feed which is somewhat older but still suitable for most purposes, the name of this webinterface is:
webinterface-old
Re: Web interface 2.1 does not work, need help #6
Also tagged with one or more of these keywords: VU+DUO
Dateiformat .m4k nicht lesbar.Started by Gummivernichter, 28 Mar 2020 Vu+Duo, m4k, Dateiformat, OpenPLi |
|
|||
Webif benaderen via telefoonStarted by Tw-er, 15 Feb 2017 Vu+Duo |
|
|||
Autotimer goneStarted by jort38, 9 Feb 2016 VU+DUO |
|
|||
Stream vanaf http://www.watchdartsforfree.tk/ naar Vu+duoStarted by wieckbud1, 29 Nov 2015 VU+Duo |
|
|||
Toch geen clean installStarted by Alain_sat, 15 Jan 2015 VU+Duo |
|
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users