Jump to content


Photo

Oscam ervaringen, vragen en antwoorden

Started by Erik Slagter, 27 Aug 2011 16:40
Softcams

  • This topic is locked This topic is locked
4250 replies to this topic

Re: Oscam ervaringen, vragen en antwoorden #2601 theparasol

  • Senior Member
  • 4,157 posts

+198
Excellent

Posted 4 March 2012 - 12:59

Ik heb Milo als een oscam config aangeleverd. Als die de default config van oscam-experimental wordt is het installeren en werkend maken van oscam kinderspel.

De wiki is op belangrijke punten achterhaalt en zelfs onjuist. Beter om daar ff flink in te wieden want het is verwarrend.

@Camping: ZGemma H.2S, Technisat Multytenne 4-in-1 @Home: Edision Mini 4K, Wave Frontier T55, EMP Centauri EMP DiSEqC 8/1 switch, 4x Inverto Ultra Black single LNB

Re: Oscam ervaringen, vragen en antwoorden #2602 dylantje

  • Senior Member
  • 2,406 posts

+19
Neutral

Posted 4 March 2012 - 13:11

Ik heb Milo als een oscam config aangeleverd. Als die de default config van oscam-experimental wordt is het installeren en werkend maken van oscam kinderspel.

De wiki is op belangrijke punten achterhaalt en zelfs onjuist. Beter om daar ff flink in te wieden want het is verwarrend.


Ik durfde niet te zeggen achterhaalt enz enz .
Maar ik denk dat je zeker gelijk hebt...
En een standaard .cfg waar een paar keline aanpassingen nodig zijn... Zou natuurlijk werelds zijn......
En ik ging dan al de mist in dat ik de stabiele versie koos???
Dus een PLI [instellingen ] versie van oscam?? [ met alle meest gebruikelijke cammen en satinstellingen van de meest gebruikte sats.. ]
Zou dat geen uitdaging zijn....[ ik zou blij zijn... hahaah en meerdere met mij.. ]

Maar ja

Tijd he...

Mut@nt HD51 with PLi 7.2 release - Cccam, PLi HD skin, HDD-1,5TB, USB DVB-T,4GB usb backupsuite. AB: harmony smartcontrol 

XTrend ET6500 with PLi 7.2 release - PLi HD skin, Stream remote, 2GB usb backupsuite. AB: Harmony 650 , 1x zgemma h2h with Cccam.

Met een USB Dvb-T Triax 78cm, 2x ALPS quatro LNB /19,2 en 23,5, SAB GSO-multiswitch: 4 sat. in 12 out. 

 

Re: Oscam ervaringen, vragen en antwoorden #2603 rimme

  • Member
  • 30 posts

0
Neutral

Posted 4 March 2012 - 14:10

Hallo,
Kan er iemand het volgende probleem oplossen.
Heb alle instellingen gezet zoals die parasol heeft gepost.


Ik gebruik oscam op 3 boxen allemaal met oscam 6470 : een dm600 met tv vlaanderen kaart, een dm800hd met tv vlaanderen kaart, een vu+ duo die connecteerd naar mijn 2 dreamboxen.
Ik krijg constant ecm's van beide readers.
Ik gebruik mijn vuduo met oscam 6470 en dvbapi.

Het probleem: Oscam stuurt een ecm request naar de beide dreamboxen en krijgt van beiden een ecm terug,
hierdoor belast hij telkens beide kaarten.

Als ik CCcam op de vu+ duo gebruik gebeurt dit niet

zie de logs:

vuduo met dvbapi log level 0

2012/03/03 22:12:41 5873D8 c dvbapiau (0100&00006C/5226/64:741E): found (307 ms) by dm800hd (1 of 1)
2012/03/03 22:12:51 5873D8 c dvbapiau (0100&00006C/5226/64:6B52): found (310 ms) by dm800hd (1 of 1)
2012/03/03 22:13:01 5873D8 c dvbapiau (0100&00006C/5226/64:66A4): found (306 ms) by dm800hd (1 of 1)
2012/03/03 22:13:11 5873D8 c dvbapiau (0100&00006C/5226/64:1F84): found (308 ms) by dm800hd (1 of 1)

dm800hd log
2012/03/03 22:12:44 B74111C0 c vuplusduo (0100&00006C/5226/64:1FF6): found (306 ms) by tv_vlaanderen (1 of 1)
2012/03/03 22:12:54 B74111C0 c vuplusduo (0100&00006C/5226/64:4D8E): found (324 ms) by tv_vlaanderen (1 of 1)
2012/03/03 22:13:04 B74111C0 c vuplusduo (0100&00006C/5226/64:21CF): found (304 ms) by tv_vlaanderen (1 of 1)
2012/03/03 22:13:14 B74111C0 c vuplusduo (0100&00006C/5226/64:D8C3): found (305 ms) by tv_vlaanderen (1 of 1)

dm600 log

2012/03/03 22:12:42 8F7D440 c vuplusduo (0100&00006C/5226/64:1F84): found (376 ms) by tv_vlaanderen (1 of 1)
2012/03/03 22:12:52 8F7D440 c vuplusduo (0100&00006C/5226/64:1FF6): found (372 ms) by tv_vlaanderen (1 of 1)
2012/03/03 22:13:02 8F7D440 c vuplusduo (0100&00006C/5226/64:4D8E): found (371 ms) by tv_vlaanderen (1 of 1)
2012/03/03 22:13:12 8F7D440 c vuplusduo (0100&00006C/5226/64:21CF): found (368 ms) by tv_vlaanderen (1 of 1)

vuduo met dvbapi log level 4

2012/03/03 22:23:01 583110 p cccam: ecm-task 216
2012/03/03 22:23:01 584950 p cccam: ecm-task 215
2012/03/03 22:23:01 583110 p cccam® dm600: get by send-idx: 216 NOT FOUND
2012/03/03 22:23:01 583110 p cccam® dm600: sending ecm for sid 5226(100) to card 00000804, hop 1, ecmtask 216
2012/03/03 22:23:01 584950 p cccam® dm800hd: get by send-idx: 215 NOT FOUND
2012/03/03 22:23:01 584950 p cccam® dm800hd: sending ecm for sid 5226(100) to card 00001aaa, hop 1, ecmtask 215
2012/03/03 22:23:01 583110 p cccam® dm600: no ecm pending!
2012/03/03 22:23:01 584950 p cccam® dm800hd: no ecm pending!
2012/03/03 22:23:01 584950 p cccam® dm800hd: parse_msg=1
2012/03/03 22:23:01 584950 p cccam® dm800hd: cws: 215 92B768B114B2511771B7668E6C5714D7
2012/03/03 22:23:01 584950 p cccam® dm800hd: no ecm pending!
2012/03/03 22:23:01 5873D8 c dvbapiau (0100&00006C/5226/64:A97F): found (306 ms) by dm800hd (1 of 1)
2012/03/03 22:23:01 583110 p cccam® dm600: parse_msg=1
2012/03/03 22:23:01 583110 p cccam® dm600: cws: 216 92B768B114B2511771B7668E6C5714D7
2012/03/03 22:23:01 583110 p cccam® dm600: no ecm pending!
Previous DM800 Owner.
VU+ Duo Owner /images/smiley/grin.gif

Re: Oscam ervaringen, vragen en antwoorden #2604 adri

  • Senior Member
  • 373 posts

+5
Neutral

Posted 4 March 2012 - 15:25

Rimme,

Heb je toevallig on oscam.conf de instelling 'lb_nbest_readers' aangepast?
Deze vertelt de oscam loadbalancer aan hoeveel 'readers' hij een ecm verzoek gaat versturen.
Het beste is om deze gewoon 'lb_nbest_readers = 1' te zetten.
Of je kunt de loadbalancer uit zetten door 'lb_mode = 0' op te nemen in oscam.conf.

Adri.

Re: Oscam ervaringen, vragen en antwoorden #2605 Black Tiger

  • Senior Member
  • 330 posts

+6
Neutral

Posted 4 March 2012 - 15:36

Met 6476 houdt preferlocalcards de volgorde van de PMT aan die in de stream zit...

Dat ga ik zeker per omgaande proberen, want de huidige versie 6471 crashed om de paar uur op m'n ET9000.
Greetings, Black Tiger

Re: Oscam ervaringen, vragen en antwoorden #2606 Black Tiger

  • Senior Member
  • 330 posts

+6
Neutral

Posted 4 March 2012 - 15:49

Ik heb trouwens wel een update op mijn zwarte seca2 kaart gehad met de 6471 met de instellingen die ik had. Stond ook wel 0100 en 0100:000000,00006A bij de id van de reader.
Greetings, Black Tiger

Re: Oscam ervaringen, vragen en antwoorden #2607 rimme

  • Member
  • 30 posts

0
Neutral

Posted 4 March 2012 - 15:57

Rimme,

Heb je toevallig on oscam.conf de instelling 'lb_nbest_readers' aangepast?
Deze vertelt de oscam loadbalancer aan hoeveel 'readers' hij een ecm verzoek gaat versturen.
Het beste is om deze gewoon 'lb_nbest_readers = 1' te zetten.
Of je kunt de loadbalancer uit zetten door 'lb_mode = 0' op te nemen in oscam.conf.

Adri.

Heb alle mogelijke instellingen al geprobeert denk ik,
maar loadbalancer staat op 0
Previous DM800 Owner.
VU+ Duo Owner /images/smiley/grin.gif

Re: Oscam ervaringen, vragen en antwoorden #2608 mick666

  • Member
  • 1 posts

0
Neutral

Posted 4 March 2012 - 17:01

Met de volgende regels na 40 seconden vastlopers op cds met S3 kaart , ziggo bleef het wel doen in oscam svn 6477 1.20 unstable

I: 0100 #ignore all old seca providers
I: 0500 #ignore viaccess
I: 0622 #ignore old irdeto
M: 1817:00006A 0100:00006A #map NL nagracaid 1817:00006A to seca 0100:00006A
M: 1818:00006C 0100:00006C #map BE nagracaid 1818:00006C to seca 0100:00006C
P: 1817:00006A #Prio NL 1817
P: 1818:00006C #Prio BE 1818


na wat gepuzzel in dvbapi kreeg ik ze allebei weer aan de praat , door een vereenvoudigde dvbapi erin te zetten

oscam.dvbapi in combinatie met cds en ziggo en

P: 0100:00006A
I: 0622 # ignore old irdeto

de regel
I:0 blocked de ziggo kaart ,

Edited by mick666, 4 March 2012 - 17:02.

Re: Oscam ervaringen, vragen en antwoorden #2609 theparasol

  • Senior Member
  • 4,157 posts

+198
Excellent

Posted 4 March 2012 - 17:50

Heb alle mogelijke instellingen al geprobeert denk ik,
maar loadbalancer staat op 0


Loadbalancer in jouw geval aanzetten en dan n best readers op 1 zoals hierboven Adri al zei.
Heb je de loadbalancer uit staan dan krijgen alle readers die een ecmrequest aankunnen die ook tegelijk aangeleverd.
Voor een dikke week terug mocht de loadbalancer niet aan icm CDS NL maar dat heb ik inmiddels gefixed. Dus aanzetten dat ding.
Dit geldt voor iedereen met meer dan 1 kaart in de kaartenbak.

@Camping: ZGemma H.2S, Technisat Multytenne 4-in-1 @Home: Edision Mini 4K, Wave Frontier T55, EMP Centauri EMP DiSEqC 8/1 switch, 4x Inverto Ultra Black single LNB

Re: Oscam ervaringen, vragen en antwoorden #2610 Black Tiger

  • Senior Member
  • 330 posts

+6
Neutral

Posted 4 March 2012 - 17:53

Met de kaartenbak bedoel je lokale kaartlezers, correct?

Edited by Black Tiger, 4 March 2012 - 17:53.

Greetings, Black Tiger

Re: Oscam ervaringen, vragen en antwoorden #2611 rimme

  • Member
  • 30 posts

0
Neutral

Posted 4 March 2012 - 18:22

Loadbalancer in jouw geval aanzetten en dan n best readers op 1 zoals hierboven Adri al zei.
Heb je de loadbalancer uit staan dan krijgen alle readers die een ecmrequest aankunnen die ook tegelijk aangeleverd.
Voor een dikke week terug mocht de loadbalancer niet aan icm CDS NL maar dat heb ik inmiddels gefixed. Dus aanzetten dat ding.
Dit geldt voor iedereen met meer dan 1 kaart in de kaartenbak.


Loadbalancer staat nu op 1, hetzelfde probleem.

[global]
logfile = /var/log/oscam.log
maxlogsize = 1024
saveinithistory = 1
lb_mode = 1
lb_savepath =

[monitor]
hideclient_to = 15
appendchaninfo = 0

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = dvbapiau

Edited by rimme, 4 March 2012 - 18:23.

Previous DM800 Owner.
VU+ Duo Owner /images/smiley/grin.gif

Re: Oscam ervaringen, vragen en antwoorden #2612 theparasol

  • Senior Member
  • 4,157 posts

+198
Excellent

Posted 4 March 2012 - 18:44

Max readers op 1 zetten en niet vergeten oscam opnieuw te starten. Die omschakeling gaat beslist niet live!

@Camping: ZGemma H.2S, Technisat Multytenne 4-in-1 @Home: Edision Mini 4K, Wave Frontier T55, EMP Centauri EMP DiSEqC 8/1 switch, 4x Inverto Ultra Black single LNB

Re: Oscam ervaringen, vragen en antwoorden #2613 theparasol

  • Senior Member
  • 4,157 posts

+198
Excellent

Posted 4 March 2012 - 18:45

Met de kaartenbak bedoel je lokale kaartlezers, correct?


Nee die van de buurman ;)

Het geheel van kaarten in een box danwel share systeem.

Edited by theparasol, 4 March 2012 - 18:46.

@Camping: ZGemma H.2S, Technisat Multytenne 4-in-1 @Home: Edision Mini 4K, Wave Frontier T55, EMP Centauri EMP DiSEqC 8/1 switch, 4x Inverto Ultra Black single LNB

Re: Oscam ervaringen, vragen en antwoorden #2614 rimme

  • Member
  • 30 posts

0
Neutral

Posted 4 March 2012 - 19:06

Max readers op 1 zetten en niet vergeten oscam opnieuw te starten. Die omschakeling gaat beslist niet live!


Max readers op 1, oscam gerestart, voor zekerheid enigma gerestart.
Nog altijd hetzelfde probleem.
Previous DM800 Owner.
VU+ Duo Owner /images/smiley/grin.gif

Re: Oscam ervaringen, vragen en antwoorden #2615 theparasol

  • Senior Member
  • 4,157 posts

+198
Excellent

Posted 4 March 2012 - 19:22

Grrr... kun je een -d128 log posten kan ik zien waar het in jouw geval misgaat en zonodig oscam aanpassen.

@Camping: ZGemma H.2S, Technisat Multytenne 4-in-1 @Home: Edision Mini 4K, Wave Frontier T55, EMP Centauri EMP DiSEqC 8/1 switch, 4x Inverto Ultra Black single LNB

Re: Oscam ervaringen, vragen en antwoorden #2616 rimme

  • Member
  • 30 posts

0
Neutral

Posted 4 March 2012 - 19:30

Grrr... kun je een -d128 log posten kan ik zien waar het in jouw geval misgaat en zonodig oscam aanpassen.


hier de log

2012/03/04 19:27:01 5A3CE8 c dvbapi: event 17 on fd 13
2012/03/04 19:27:01 5A3CE8 c dvbapi: stop descrambling (demux_id: 0)
2012/03/04 19:27:01 5A3CE8 c dvbapi: CA_SET_PID pid=0x0204 index=-1
2012/03/04 19:27:01 5A3CE8 c dvbapi: CA_SET_PID pid=0x0068 index=-1
2012/03/04 19:27:01 5A3CE8 c dvbapi: CA_SET_PID pid=0x0024 index=-1
2012/03/04 19:27:02 5A3CE8 c dvbapi: new socket connection fd: 13
2012/03/04 19:27:02 5A3CE8 c capmt:
2012/03/04 19:27:02 5A3CE8 03 1B 76 17 00 22 01 81 08 00 EB 00 00 0C 88 00
2012/03/04 19:27:02 5A3CE8 03 82 02 01 00 84 02 09 E2 09 07 18 18 E7 21 02
2012/03/04 19:27:02 5A3CE8 00 6C 85 04 00 00 00 01 1B 02 04 00 25 01 09 11
2012/03/04 19:27:02 5A3CE8 01 00 E7 21 00 6C FF FF E0 00 00 00 00 00 00 2C
2012/03/04 19:27:02 5A3CE8 64 09 0F 05 00 E5 91 10 01 00 13 01 20 14 03 04
2012/03/04 19:27:02 5A3CE8 25 00 04 00 58 00 25 01 09 11 01 00 E7 21 00 6C
2012/03/04 19:27:02 5A3CE8 FF FF E0 00 00 00 00 00 00 2C 64 09 0F 05 00 E5
2012/03/04 19:27:02 5A3CE8 91 10 01 00 13 01 20 14 03 04 25 00 06 00 23 00
2012/03/04 19:27:02 5A3CE8 00
2012/03/04 19:27:02 5A3CE8 c dvbapi: id: 0 demux_index: 0 ca_mask: 01 program_info_length: 34 ca_pmt_list_management 03
2012/03/04 19:27:02 5A3CE8 c dvbapi: [pmt] type: 81 length: 8
2012/03/04 19:27:02 5A3CE8 c dvbapi: [pmt] type: 82 length: 2
2012/03/04 19:27:02 5A3CE8 c dvbapi: [pmt] type: 84 length: 2
2012/03/04 19:27:02 5A3CE8 c dvbapi: [pmt] type: 09 length: 7
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD PID 0] CAID: 1818 ECM_PID: 0721 PROVID: 00006C
2012/03/04 19:27:02 5A3CE8 c dvbapi: [pmt] type: 85 length: 4
2012/03/04 19:27:02 5A3CE8 c dvbapi: [pmt] stream_type: 1b pid: 0204 length: 37
2012/03/04 19:27:02 5A3CE8 c dvbapi: [pmt] type: 09 length: 17
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD PID 1] CAID: 0100 ECM_PID: 0721 PROVID: 00006C
2012/03/04 19:27:02 5A3CE8 c dvbapi: [pmt] type: 09 length: 15
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD PID 2] CAID: 0500 ECM_PID: 0591 PROVID: 042500
2012/03/04 19:27:02 5A3CE8 c dvbapi: [pmt] stream_type: 04 pid: 0058 length: 37
2012/03/04 19:27:02 5A3CE8 c dvbapi: [pmt] type: 09 length: 17
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD STREAM 1] CAID: 0100 ECM_PID: 0721 PROVID: 00006C
2012/03/04 19:27:02 5A3CE8 c dvbapi: [pmt] type: 09 length: 15
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD STREAM 2] CAID: 0500 ECM_PID: 0591 PROVID: 042500
2012/03/04 19:27:02 5A3CE8 c dvbapi: [pmt] stream_type: 06 pid: 0023 length: 0
2012/03/04 19:27:02 5A3CE8 c dvbapi: Found 3 ECMpids and 3 STREAMpids in PMT
2012/03/04 19:27:02 5A3CE8 c dvbapi: new program number: 1B76 (1818:1B76 unknown)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [IGNORE PID 2] 0500:042500 (file)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [IGNORE PID 0] 1818:00006C (file)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [PRIORITIZE PID 1] 0100:00006C (position: 3)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [TRY PID 1] CAID: 0100 PROVID: 00006C CA_PID: 0721
2012/03/04 19:27:02 5A3CE8 c dvbapi: set filter pid: 0721
2012/03/04 19:27:02 5A3CE8 c dvbapi: DEVICE open (/dev/dvb/adapter0/demux0) fd 14
2012/03/04 19:27:02 5A3CE8 c dvbapi: request cw for caid 0100 provid 00006C srvid 1B76 pid 0721 chid 0000
2012/03/04 19:27:02 5A3CE8 c dvbapi: CA_SET_PID pid=0x0204 index=0
2012/03/04 19:27:02 5A3CE8 c dvbapi: CA_SET_PID pid=0x0058 index=0
2012/03/04 19:27:02 5A3CE8 c dvbapi: CA_SET_PID pid=0x0023 index=-1
2012/03/04 19:27:02 5A3CE8 c dvbapi: Start descrambling PID #1 (CAID: 0100) 1
2012/03/04 19:27:02 5A3CE8 c dvbapi: set filter pid: 0001
2012/03/04 19:27:02 5A3CE8 c dvbapi: DEVICE open (/dev/dvb/adapter0/demux0) fd 17
2012/03/04 19:27:02 5A3CE8 c dvbapi: write cw0 index: 0 (ca0)
2012/03/04 19:27:02 5A3CE8 c dvbapi: write cw1 index: 0 (ca0)
2012/03/04 19:27:02 5A3CE8 c dvbapiau (0100&00006C/1B76/64:8919): found (308 ms) by dm600 (1 of 2)
2012/03/04 19:27:02 5A3CE8 c dvbapi: receiving cat
2012/03/04 19:27:02 5A3CE8 c cat:
2012/03/04 19:27:02 5A3CE8 01 B0 D7 FF FF C9 00 00 09 04 06 22 E1 36 09 19
2012/03/04 19:27:02 5A3CE8 01 00 E0 B6 05 E0 B7 00 6A E0 B8 00 6B E0 B9 00
2012/03/04 19:27:02 5A3CE8 6C E0 BA 00 6D E0 BB 00 00 09 04 0D 03 F3 8A 09
2012/03/04 19:27:02 5A3CE8 04 0D 70 F3 8B 09 04 0D 96 FF 40 09 04 06 24 FF
2012/03/04 19:27:02 5A3CE8 41 09 1B 05 00 E0 AA 13 01 20 14 03 04 25 00 14
2012/03/04 19:27:02 5A3CE8 03 04 25 10 14 03 04 25 20 14 03 04 25 30 09 04
2012/03/04 19:27:02 5A3CE8 06 66 F5 7C 09 04 0D 0F F5 7D 09 07 18 17 E0 B6
2012/03/04 19:27:02 5A3CE8 02 FE 22 09 07 18 18 E0 B6 02 FE 22 09 07 18 19
2012/03/04 19:27:02 5A3CE8 E0 B6 02 FE 22 09 07 18 17 E0 BC 02 00 6A 09 07
2012/03/04 19:27:02 5A3CE8 18 18 E0 BC 02 00 6C 09 07 18 19 E0 BC 02 00 6D
2012/03/04 19:27:02 5A3CE8 09 07 18 17 E0 BB 02 01 C0 09 07 18 18 E0 BB 02
2012/03/04 19:27:02 5A3CE8 01 C0 09 07 18 19 E0 BB 02 01 C0 09 07 18 17 E0
2012/03/04 19:27:02 5A3CE8 B7 02 00 6A 09 07 18 18 E0 B9 02 00 6C 09 07 18
2012/03/04 19:27:02 5A3CE8 19 E0 BA 02 00 6D A8 AB 74 DD
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 0622 EMM_PID: 0136
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 0622 EMM_PID: 0136 PROVID: 000000 - (type 7)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 0100 EMM_PID: 00B6 PROVID: 000000 - (type 5)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 0100 EMM_PID: 00b6
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 0100 EMM_PID: 00B7 PROVID: 00006A
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 0100 EMM_PID: 00B7 PROVID: 00006A - (type 2)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 0100 EMM_PID: 00B8 PROVID: 00006B
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 0100 EMM_PID: 00B8 PROVID: 00006B - (type 2)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 0100 EMM_PID: 00B9 PROVID: 00006C
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 0100 EMM_PID: 00B9 PROVID: 00006C - (type 2)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 0100 EMM_PID: 00BA PROVID: 00006D
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 0100 EMM_PID: 00BA PROVID: 00006D - (type 2)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 0100 EMM_PID: 00BB PROVID: 000000
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 0100 EMM_PID: 00BB PROVID: 000000 - (type 2)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 0d03 EMM_PID: 138a
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 0D03 EMM_PID: 138A PROVID: 000000 - (type 7)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 0d70 EMM_PID: 138b
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 0D70 EMM_PID: 138B PROVID: 000000 - (type 7)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 0d96 EMM_PID: 1f40
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 0D96 EMM_PID: 1F40 PROVID: 000000 - (type 7)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 0624 EMM_PID: 1f41
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 0624 EMM_PID: 1F41 PROVID: 000000 - (type 7)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 0500 EMM_PID: 00aa PROVID: 042500
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 0500 EMM_PID: 00AA PROVID: 042500 - (type 7)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 0500 EMM_PID: 00aa PROVID: 042510
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 0500 EMM_PID: 00AA PROVID: 042510 - (type 7)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 0500 EMM_PID: 00aa PROVID: 042520
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 0500 EMM_PID: 00AA PROVID: 042520 - (type 7)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 0500 EMM_PID: 00aa PROVID: 042530
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 0500 EMM_PID: 00AA PROVID: 042530 - (type 7)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 0666 EMM_PID: 157c
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 0666 EMM_PID: 157C PROVID: 000000 - (type 7)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 0d0f EMM_PID: 157d
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 0D0F EMM_PID: 157D PROVID: 000000 - (type 7)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 1817 EMM_PID: 00b6 PROVID: 02FE22
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 1817 EMM_PID: 00B6 PROVID: 02FE22 - (type 7)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 1818 EMM_PID: 00b6 PROVID: 02FE22
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 1818 EMM_PID: 00B6 PROVID: 02FE22 - (type 7)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 1819 EMM_PID: 00b6 PROVID: 02FE22
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 1819 EMM_PID: 00B6 PROVID: 02FE22 - (type 7)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 1817 EMM_PID: 00bc PROVID: 02006A
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 1817 EMM_PID: 00BC PROVID: 02006A - (type 7)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 1818 EMM_PID: 00bc PROVID: 02006C
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 1818 EMM_PID: 00BC PROVID: 02006C - (type 7)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 1819 EMM_PID: 00bc PROVID: 02006D
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 1819 EMM_PID: 00BC PROVID: 02006D - (type 7)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 1817 EMM_PID: 00bb PROVID: 0201C0
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 1817 EMM_PID: 00BB PROVID: 0201C0 - (type 7)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 1818 EMM_PID: 00bb PROVID: 0201C0
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 1818 EMM_PID: 00BB PROVID: 0201C0 - (type 7)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 1819 EMM_PID: 00bb PROVID: 0201C0
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 1819 EMM_PID: 00BB PROVID: 0201C0 - (type 7)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 1817 EMM_PID: 00b7 PROVID: 02006A
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 1817 EMM_PID: 00B7 PROVID: 02006A - (type 7)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 1818 EMM_PID: 00b9 PROVID: 02006C
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 1818 EMM_PID: 00B9 PROVID: 02006C - (type 7)
2012/03/04 19:27:02 5A3CE8 c dvbapi: [cat] CAID: 1819 EMM_PID: 00ba PROVID: 02006D
2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 1819 EMM_PID: 00BA PROVID: 02006D - (type 7)
2012/03/04 19:27:05 5A3CE8 c dvbapi: start 3 emm filter for dm600
2012/03/04 19:27:05 5A3CE8 c starting emm filter type UNIQUE, pid: 0x00B6
2012/03/04 19:27:05 5A3CE8 82 22 22 9F C2 00 00 00 00 00 00 00 00 00 00 00
2012/03/04 19:27:05 5A3CE8 FF FF FF FF FF FF FF 00 00 00 00 00 00 00 00 00
2012/03/04 19:27:05 5A3CE8 c dvbapi: DEVICE open (/dev/dvb/adapter0/demux0) fd 17
2012/03/04 19:27:05 5A3CE8 c starting emm filter type GLOBAL, pid: 0x00B6
2012/03/04 19:27:05 5A3CE8 83 00 6C 00 00 00 00 00 00 00 00 00 00 00 00 00
2012/03/04 19:27:05 5A3CE8 FF FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00
2012/03/04 19:27:05 5A3CE8 c dvbapi: DEVICE open (/dev/dvb/adapter0/demux0) fd 18
2012/03/04 19:27:05 5A3CE8 c starting emm filter type SHARED, pid: 0x00B9
2012/03/04 19:27:05 5A3CE8 84 00 6C 00 37 97 00 00 00 00 00 00 00 00 00 00
2012/03/04 19:27:05 5A3CE8 FF FF FF FF FF FF 00 00 00 00 00 00 00 00 00 00
2012/03/04 19:27:05 5A3CE8 c dvbapi: DEVICE open (/dev/dvb/adapter0/demux0) fd 19
2012/03/04 19:27:05 5A3CE8 c dvbapi: request cw for caid 0100 provid 00006C srvid 1B76 pid 0721 chid 0000
2012/03/04 19:27:06 5A3CE8 c dvbapi: write cw1 index: 0 (ca0)
2012/03/04 19:27:06 5A3CE8 c dvbapiau (0100&00006C/1B76/64:5476): found (309 ms) by dm600 (1 of 2)
2012/03/04 19:27:15 5A3CE8 c dvbapi: request cw for caid 0100 provid 00006C srvid 1B76 pid 0721 chid 0000
2012/03/04 19:27:16 5A3CE8 c dvbapi: write cw0 index: 0 (ca0)
2012/03/04 19:27:16 5A3CE8 c dvbapiau (0100&00006C/1B76/64:F7BC): found (309 ms) by dm600 (1 of 2)
Previous DM800 Owner.
VU+ Duo Owner /images/smiley/grin.gif

Re: Oscam ervaringen, vragen en antwoorden #2617 rimme

  • Member
  • 30 posts

0
Neutral

Posted 4 March 2012 - 19:37

Grrr... kun je een -d128 log posten kan ik zien waar het in jouw geval misgaat en zonodig oscam aanpassen.


Hier een -d4 log, hier is het misschien duidelijker op:

2012/03/04 19:34:21 587148 c dvbapi: [ADD PID 0] CAID: 1818 ECM_PID: 0721 PROVID: 00006C
2012/03/04 19:34:21 587148 c dvbapi: [ADD PID 1] CAID: 0100 ECM_PID: 0721 PROVID: 00006C
2012/03/04 19:34:21 587148 c dvbapi: [ADD PID 2] CAID: 0500 ECM_PID: 0591 PROVID: 042500
2012/03/04 19:34:21 587148 c dvbapi: new program number: 1B76 (1818:1B76 unknown)
2012/03/04 19:34:21 582E80 p cccam: ecm-task 2
2012/03/04 19:34:21 5846C0 p cccam: ecm-task 1
2012/03/04 19:34:21 582E80 p cccam® dm800hd: get by send-idx: 2 NOT FOUND
2012/03/04 19:34:21 582E80 p cccam® dm800hd: sending ecm for sid 1B76(100) to card 0000065d, hop 1, ecmtask 2
2012/03/04 19:34:21 5846C0 p cccam® dm600: get by send-idx: 1 NOT FOUND
2012/03/04 19:34:21 5846C0 p cccam® dm600: sending ecm for sid 1B76(100) to card 00000ffd, hop 1, ecmtask 1
2012/03/04 19:34:21 582E80 p cccam® dm800hd: no ecm pending!
2012/03/04 19:34:21 5846C0 p cccam® dm600: no ecm pending!
2012/03/04 19:34:22 5846C0 p cccam® dm600: parse_msg=1
2012/03/04 19:34:22 5846C0 p cccam® dm600: cws: 1 F9A636D5DE7DAF0ABE1D29048E3F16E3
2012/03/04 19:34:22 5846C0 p cccam® dm600: added good sid 1B76(100) for card 00000ffd
2012/03/04 19:34:22 5846C0 p cccam® dm600: no ecm pending!
2012/03/04 19:34:22 587148 c dvbapi: Start descrambling PID #1 (CAID: 0100) 1
2012/03/04 19:34:22 587148 c dvbapiau (0100&00006C/1B76/64:0DBC): found (309 ms) by dm600 (2 of 2)
2012/03/04 19:34:22 582E80 p cccam® dm800hd: parse_msg=1
2012/03/04 19:34:22 582E80 p cccam® dm800hd: cws: 2 F9A636D5DE7DAF0ABE1D29048E3F16E3
2012/03/04 19:34:22 582E80 p cccam® dm800hd: added good sid 1B76(100) for card 0000065d
2012/03/04 19:34:22 582E80 p cccam® dm800hd: no ecm pending!
2012/03/04 19:34:25 582E80 p cccam: ecm-task 3
2012/03/04 19:34:25 582E80 p cccam® dm800hd: get by send-idx: 3 NOT FOUND
2012/03/04 19:34:25 582E80 p cccam® dm800hd: sending ecm for sid 1B76(100) to card 0000065d, hop 1, ecmtask 3
2012/03/04 19:34:25 582E80 p cccam® dm800hd: no ecm pending!
2012/03/04 19:34:25 5846C0 p cccam: ecm-task 2
2012/03/04 19:34:25 5846C0 p cccam® dm600: get by send-idx: 2 NOT FOUND
2012/03/04 19:34:25 5846C0 p cccam® dm600: sending ecm for sid 1B76(100) to card 00000ffd, hop 1, ecmtask 2
2012/03/04 19:34:25 5846C0 p cccam® dm600: no ecm pending!
2012/03/04 19:34:25 5846C0 p cccam® dm600: parse_msg=1
2012/03/04 19:34:25 5846C0 p cccam® dm600: cws: 2 F9A636D5DE7DAF0AF6A2D66EA41807C3
2012/03/04 19:34:25 5846C0 p cccam® dm600: no ecm pending!
2012/03/04 19:34:25 587148 c dvbapiau (0100&00006C/1B76/64:5EAF): found (309 ms) by dm600 (2 of 2)
2012/03/04 19:34:25 582E80 p cccam® dm800hd: parse_msg=1
2012/03/04 19:34:25 582E80 p cccam® dm800hd: cws: 3 F9A636D5DE7DAF0AF6A2D66EA41807C3
2012/03/04 19:34:25 582E80 p cccam® dm800hd: no ecm pending!
2012/03/04 19:34:35 582E80 p cccam: ecm-task 4
2012/03/04 19:34:35 582E80 p cccam® dm800hd: get by send-idx: 4 NOT FOUND
2012/03/04 19:34:35 582E80 p cccam® dm800hd: sending ecm for sid 1B76(100) to card 0000065d, hop 1, ecmtask 4
2012/03/04 19:34:35 582E80 p cccam® dm800hd: no ecm pending!
2012/03/04 19:34:35 5846C0 p cccam: ecm-task 3
2012/03/04 19:34:35 5846C0 p cccam® dm600: get by send-idx: 3 NOT FOUND
2012/03/04 19:34:35 5846C0 p cccam® dm600: sending ecm for sid 1B76(100) to card 00000ffd, hop 1, ecmtask 3
2012/03/04 19:34:35 5846C0 p cccam® dm600: no ecm pending!
2012/03/04 19:34:35 5846C0 p cccam® dm600: parse_msg=1
2012/03/04 19:34:35 5846C0 p cccam® dm600: cws: 3 8536CD88963D08DBF6A2D66EA41807C3
2012/03/04 19:34:35 5846C0 p cccam® dm600: no ecm pending!
2012/03/04 19:34:35 587148 c dvbapiau (0100&00006C/1B76/64:3DC7): found (309 ms) by dm600 (2 of 2)
2012/03/04 19:34:35 582E80 p cccam® dm800hd: parse_msg=1
2012/03/04 19:34:35 582E80 p cccam® dm800hd: cws: 4 8536CD88963D08DBF6A2D66EA41807C3
2012/03/04 19:34:35 582E80 p cccam® dm800hd: no ecm pending!
2012/03/04 19:34:45 582E80 p cccam: ecm-task 5
2012/03/04 19:34:45 5846C0 p cccam: ecm-task 4
2012/03/04 19:34:45 582E80 p cccam® dm800hd: get by send-idx: 5 NOT FOUND
2012/03/04 19:34:45 582E80 p cccam® dm800hd: sending ecm for sid 1B76(100) to card 0000065d, hop 1, ecmtask 5
2012/03/04 19:34:45 5846C0 p cccam® dm600: get by send-idx: 4 NOT FOUND
2012/03/04 19:34:45 5846C0 p cccam® dm600: sending ecm for sid 1B76(100) to card 00000ffd, hop 1, ecmtask 4
2012/03/04 19:34:45 582E80 p cccam® dm800hd: no ecm pending!
2012/03/04 19:34:45 5846C0 p cccam® dm600: no ecm pending!
2012/03/04 19:34:45 5846C0 p cccam® dm600: parse_msg=1
2012/03/04 19:34:45 5846C0 p cccam® dm600: cws: 4 8536CD88963D08DB2C1AA8EE4C0E045E
2012/03/04 19:34:45 5846C0 p cccam® dm600: no ecm pending!
2012/03/04 19:34:45 587148 c dvbapiau (0100&00006C/1B76/64:E23F): found (316 ms) by dm600 (2 of 2)
2012/03/04 19:34:45 582E80 p cccam® dm800hd: parse_msg=1
2012/03/04 19:34:45 582E80 p cccam® dm800hd: cws: 5 8536CD88963D08DB2C1AA8EE4C0E045E
2012/03/04 19:34:45 582E80 p cccam® dm800hd: no ecm pending!
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=4
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=4
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=4
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=4
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=4
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=4
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=4
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=4
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=4
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=4
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=4
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=4
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=4
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=4
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=4
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=4
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=4
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=4
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=4
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=4
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=4
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=4
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=4
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=4
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=7
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=7
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=7
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=7
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=7
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=7
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=7
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=7
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=7
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=7
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=7
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=7
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=7
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=7
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=7
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=7
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=7
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=7
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=7
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=7
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=7
2012/03/04 19:34:49 5846C0 p cccam® dm600: parse_msg=7
Previous DM800 Owner.
VU+ Duo Owner /images/smiley/grin.gif

Re: Oscam ervaringen, vragen en antwoorden #2618 Remi_4

  • Senior Member
  • 242 posts

+6
Neutral

Posted 4 March 2012 - 19:40

Ik heb nu Oscam draaien op de ET9k voor heen CCcam, maar hoe kan ik nu zien dat de datum veranderd op de kaart.
Currently using: UV+ DUO 4K +1TB WD hdd green en CT ET900 + 1 TB WD hdd, beide met PLI en oscam.

Re: Oscam ervaringen, vragen en antwoorden #2619 theparasol

  • Senior Member
  • 4,157 posts

+198
Excellent

Posted 4 March 2012 - 19:46 

2012/03/04 19:27:02 5A3CE8 c dvbapi: [ADD EMMPID] CAID: 1819 EMM_PID: 00BA PROVID: 02006D - (type 7)
2012/03/04 19:27:05 5A3CE8 c dvbapi: start 3 emm filter for dm600
Hier zit bijna 3 seconden in.
wat gebeurt er als je de au van dvbapi user eens tijdelijk op 0 zet? (of alleen lokale readers!)

@Camping: ZGemma H.2S, Technisat Multytenne 4-in-1 @Home: Edision Mini 4K, Wave Frontier T55, EMP Centauri EMP DiSEqC 8/1 switch, 4x Inverto Ultra Black single LNB

Re: Oscam ervaringen, vragen en antwoorden #2620 theparasol

  • Senior Member
  • 4,157 posts

+198
Excellent

Posted 4 March 2012 - 19:48

Ik heb nu Oscam draaien op de ET9k voor heen CCcam, maar hoe kan ik nu zien dat de datum veranderd op de kaart.


via webinterface oscam -> readers -> action gedeelte kaart met sleuteltje

Edited by theparasol, 4 March 2012 - 19:49.

@Camping: ZGemma H.2S, Technisat Multytenne 4-in-1 @Home: Edision Mini 4K, Wave Frontier T55, EMP Centauri EMP DiSEqC 8/1 switch, 4x Inverto Ultra Black single LNB

Back to [NL] Gebruikersondersteuning

Also tagged with one or more of these keywords: Softcams

15 user(s) are reading this topic

0 members, 15 guests, 0 anonymous users

  1. Forums
  2. → PLi® Support
  3. → [NL] Gebruikersondersteuning