91 replies to this topic

[catastrofus]

And the next one, this time it's bluez4:

Connecting to mirrors.openembedded.org|82.197.159.157|:80... failed: No route to host.
Connecting to mirrors.openembedded.org|82.197.159.157|:80... failed: No route to host.
--2011-10-13 21:33:50-- http://sources.opene...uez-4.84.tar.gz
--2011-10-13 21:33:50-- http://sources.opene...s-3.1.2.tar.bz2
Resolving sources.openembedded.org... 140.211.169.152
Resolving sources.openembedded.org... 140.211.169.152
Connecting to sources.openembedded.org|140.211.169.152|:80... connected.
Connecting to sources.openembedded.org|140.211.169.152|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2011-10-13 21:33:50 ERROR 404: Not Found.

HTTP request sent, awaiting response... 200 OK
Length: 265387 (259K) [application/octet-stream]
Saving to: `/data/openpli/dm8000/sources/pciutils-3.1.2.tar.bz2'

NOTE: package bluez4-4.84-r8.0: task Fetch failed: Unable to fetch URL http://www.kernel.or...uez-4.84.tar.gz from any source.: Failed
ERROR: Function 'Fetch failed: Unable to fetch URL http://www.kernel.or...uez-4.84.tar.gz from any source.' failed
ERROR: Task 2439 (/data/openpli/dm8000/openembedded/recipes/bluez/bluez4_4.84.bb, do_fetch) failed with exit code '1'
Waiting for 7 active tasks to finish:
0: sqlite3-native-3.6.23.1-r4.0 do_compile (pid 25317)
1: git-native-1.7.3.5-r0 do_compile (pid 6054)
2: qmake-native-1.07a-r6 do_configure (pid 26160)
3: dropbear-0.51-r7.0 do_patch (pid 20702)
4: cmake-native-2.8.3-r2.0 do_configure (pid 6806)
5: pciutils-3.1.2-r7 do_fetch (pid 20601)
6: lzo2-native-2.03-r0 do_compile (pid 13628)
0K .......... .......... .......... .......... .......... 19% 75.1K 3s
50K .......... .......... .......... .......... .......... 38% 292K 1s
100K .......... .......... .......... .......... .......... 57% 283K 1s
150K .......... .......... .......... .......... .......... 77% 287K 0s
200K .......... .......... .......... .......... .......... 96% 305K 0s
250K ......... 100% 3.82M=1.4s

2011-10-13 21:33:51 (191 KB/s) - `/data/openpli/dm8000/sources/pciutils-3.1.2.tar.bz2' saved [265387/265387]

Waiting for 6 active tasks to finish:
0: sqlite3-native-3.6.23.1-r4.0 do_compile (pid 25317)
1: git-native-1.7.3.5-r0 do_compile (pid 6054)
2: qmake-native-1.07a-r6 do_configure (pid 26160)
3: dropbear-0.51-r7.0 do_patch (pid 20702)
4: cmake-native-2.8.3-r2.0 do_configure (pid 6806)
5: lzo2-native-2.03-r0 do_compile (pid 13628)
NOTE: package pciutils-3.1.2-r7: task do_fetch: Succeeded
Waiting for 5 active tasks to finish:
0: sqlite3-native-3.6.23.1-r4.0 do_compile (pid 25317)
1: git-native-1.7.3.5-r0 do_compile (pid 6054)
2: qmake-native-1.07a-r6 do_configure (pid 26160)
3: cmake-native-2.8.3-r2.0 do_configure (pid 6806)
4: lzo2-native-2.03-r0 do_compile (pid 13628)
NOTE: package dropbear-0.51-r7.0: task do_patch: Succeeded
Waiting for 4 active tasks to finish:
0: git-native-1.7.3.5-r0 do_compile (pid 6054)
1: qmake-native-1.07a-r6 do_configure (pid 26160)
2: cmake-native-2.8.3-r2.0 do_configure (pid 6806)
3: lzo2-native-2.03-r0 do_compile (pid 13628)
NOTE: package sqlite3-native-3.6.23.1-r4.0: task do_compile: Succeeded
Waiting for 3 active tasks to finish:
0: git-native-1.7.3.5-r0 do_compile (pid 6054)
1: cmake-native-2.8.3-r2.0 do_configure (pid 6806)
2: lzo2-native-2.03-r0 do_compile (pid 13628)
NOTE: package qmake-native-1.07a-r6: task do_configure: Succeeded
Waiting for 2 active tasks to finish:
0: git-native-1.7.3.5-r0 do_compile (pid 6054)
1: cmake-native-2.8.3-r2.0 do_configure (pid 6806)
NOTE: package lzo2-native-2.03-r0: task do_compile: Succeeded
Waiting for 1 active tasks to finish:
0: cmake-native-2.8.3-r2.0 do_configure (pid 6806)
NOTE: package git-native-1.7.3.5-r0: task do_compile: Succeeded
NOTE: package cmake-native-2.8.3-r2.0: task do_configure: Succeeded
ERROR: '/data/openpli/dm8000/openembedded/recipes/bluez/bluez4_4.84.bb' failed
make: *** [image] Error 1
dm8000@obelix ~/openpli $

[catastrofus]

I think I have this one on my backup, I hope.

[blzr]

here you are

Attached Files

•  bluez-4.84.tar.gz   1.05MB   56 downloads

[catastrofus]

Thnx!

[pieterg]

and some advice for the next time: never delete your sources directory

[catastrofus]

Yeah, I know
But I've restored the backup of the (previous) downloaded tar.gz files of 20110606 and I still run into issue's about bluez:

NOTE: package firmware-zd1211-1.0-r0: task do_setscene: Succeeded
From git://openpli.git.sourceforge.net/gitroot/openpli/enigma2
* branch master -> FETCH_HEAD
WARNING: /data/openpli/dm8000/bitbake/lib/bb/fetch/git.py:191: DeprecationWarning: Call to deprecated function bb.mkdirhier: Please use bb.utils.mkdirhier instead.
bb.mkdirhier(codir)

Waiting for 1 active tasks to finish:
0: python-native-2.6.6-ml12.0 do_install (pid 28786)
NOTE: package enigma2-2.7+git0+3bf3a46b315c558585e6104f09500106b3ff6909-r26: task do_fetch: Succeeded
NOTE: package python-native-2.6.6-ml12.0: task do_install: Succeeded
ERROR: '/data/openpli/dm8000/openembedded/recipes/bluez/bluez4_4.84.bb' failed
make: *** [image] Error 1
dm8000@obelix ~/openpli $

and some advice for the next time: never delete your sources directory

Edited by catastrofus, 14 October 2011 - 19:09.

[Tech]

Try these files ...

Attached Files

•  bluez-4.84.rar   1.06MB   14 downloads

[catastrofus]

I have restored bluez from my backup:

dm8000@obelix ~/openpli/sources $ ls -l bluez*
-rw-r--r-- 1 dm8000 users 1036508 Jun 21 2009 bluez-4.42.tar.gz
-rw-r--r-- 1 dm8000 users 32 May 6 14:37 bluez-4.42.tar.gz.md5
dm8000@obelix ~/openpli/sources $
Ok, so I'm using the wrong version.
I will try the 4.84 version...

Try these files ...

[catastrofus]

The build is running fine now. It's not finished yet but it's running much longer than before.

[catastrofus]

Ok, the build for the 8000 finished successfully. Thanks for your support!

[digidude]

im also having trouble compiling, i have been trying for months, and recently started again. i kept my original sources folder, and deleted everything else. my first few compiles threw errors that led me to this thread, and with the files posted here, i have meneged to get as far as the person above, but, mine still fails to compile, and now complains that the following files are missing from my sources directory

eglibc_2.12
libtool-cross_2.4
git-native_1.7.3.5
openssl_0.9.8m
libebml_1.0.0

is there any way of knowing what files i should have in there instead ofwaiting nearly 10 hours for the next error to appear?

thanks for any advise

[hemertje]

have a look here

http://openpli.org/f...p-ubuntudebian/

[joanvanberlo]

im also having trouble compiling, i got most of the problems solved reading the forum

I have bin struggling with the next problem :

+ mkdir -p /home/openpli/build-vuduo/tmp/deploy/images/vuduo/vuplus/duo
+ cp /home/openpli/build-vuduo/tmp/deploy/images/vuduo/openpli-enigma2-2.1-vuduo.rootfs.jffs2 /home/openpli/build-vuduo/tmp/deploy/images/vuduo/vuplus/duo/root_cfe_auto.jffs2
+ cp /home/openpli/build-vuduo/tmp/deploy/images/vuduo/vmlinux-vuduo.bin.gz /home/openpli/build-vuduo/tmp/deploy/images/vuduo/vuplus/duo/kernel_cfe_auto.bin
+ cp /home/openpli/build-vuduo/tmp/deploy/images/vuduo/openpli-enigma2-2.1-vuduo.boot.jffs2 /home/openpli/build-vuduo/tmp/deploy/images/vuduo/vuplus/duo/boot_cfe_auto.jffs2
+ cd /home/openpli/build-vuduo/tmp/deploy/images/vuduo
+ rm -f openpli-enigma2-2.1-vuduo_usb.zip
+ zip openpli-enigma2-2.1-vuduo_usb.zip vuplus/duo/boot_cfe_auto.jffs2 vuplus/duo/kernel_cfe_auto.bin vuplus/duo/root_cfe_auto.jffs2
/home/openpli/build-vuduo/tmp/work/vuduo-oe-linux/openpli-enigma2-image-1.0-r0/temp/run.do_rootfs.12382: line 111: zip: command not found

[blzr]

zip: command not found

and you've got zip installled?

[joanvanberlo]

I have installed "sudo apt-get install zip" and everything is working fine now.

[omgwtfpwn]

hi to all

i try to build a image for my stb (just for fun and leaning something)

as in your very good tutorial there was some error while downloading sources
i find and add them with md5 file also

the last packages that give error and stop the compile was utils-linux-ng_2.18.tar.gz
i download it and put in sources but there was the same error
with a better look at file ther was a difference i the file name
utils-linux-ng_2.18.tar.gz.bb and my source file is util-linux-ng-2.18.tar.gz
i try to change the file name in tarball but this dont help at all

also i saw that there is a directory in /openpli/openembed/recipes/util-linux-ng with some bb files inside
are this the file a have to rename ?

and in the error i see that it try to download the package from linux.org, in which file i can chage this ?

NOTE: package ushare-1.1a-r1: task do_setscene: Succeeded
HTTP request sent, awaiting response... 404 Not Found
2011-11-03 17:10:51 ERROR 404: Not Found.

HTTP request sent, awaiting response... 404 Not Found
2011-11-03 17:10:51 ERROR 404: Not Found.

HTTP request sent, awaiting response... 404 Not Found
2011-11-03 17:10:51 ERROR 404: Not Found.

NOTE: package util-linux-ng-2.18-r36.0: task Fetch failed: Unable to fetch URL http://kernel.org/pub/linux/utils/util-linux-ng/v2.18/util-linux-ng-2.18.tar.bz2;name=archive from any source.: Failed
ERROR: Function 'Fetch failed: Unable to fetch URL http://kernel.org/pub/linux/utils/util-linux-ng/v2.18/util-linux-ng-2.18.tar.bz2;name=archive from any source.' failed
NOTE: package lzo-native-1.08-r15: task do_unpack: Started
NOTE: package lzo-native-1.08-r15: task do_unpack: Succeeded

thanks

Edited by omgwtfpwn, 3 November 2011 - 16:56.

[blzr]

have you tried with sources from this post?
http://openpli.org/f...post__p__223944

[pieterg]

And google usually can find the tarballs on a different mirror

[omgwtfpwn]

have you tried with sources from this post?
http://openpli.org/f...post__p__223944

have run now diff and it is the same tarball

And google usually can find the tarballs on a different mirror

sorry pieterg i dont get it
are u saying that i have to test different tarball ?

but how can i change the mirror for download the tarball couse the package is not in linux.org, and not only for this tarball but for any package that give errors

i am going to delete all directory except the sources and try again. maybe this time i will be more lucky
thanks

Edited by omgwtfpwn, 3 November 2011 - 20:39.

[pieterg]

There are mirrors which no longer exist, so google for the tarball name, download it, and manually create the md5. That should satisfy bitbake.