17 replies to this topic

[guffdaddy]

I used to have my DM800 set with a channel which it would default to after coming out of standby but having updated the channel list it doesn't work any more. Where do I set this - I've looked into all the menus and plugins but cannot find it.

Note that this isn't the same as the startup channel (i.e. the channel the box defaults to after powering on).

Edited by guffdaddy, 10 October 2011 - 17:38.

[guffdaddy]

Good to see this forum is as helpful as ever...

[Graffy]

Channel list -> set on desired channel -> menu -> .....

[nietgiftig]

Good to see this forum is as helpful as ever...

And your help on the forum consist of .. ???

[guffdaddy]

Channel list -> set on desired channel -> menu -> .....

I think that you mean the "Set as Startup Service" option - that will indeed set the channel as default when the box restarts or enigma2 restarts, but not when it is brought out of standby.

I can't remember how I did this before but I did have it working - up until I imported new channel lists which screwed it up.

Thanks for replying anyway.

[guffdaddy]

Good to see this forum is as helpful as ever...

And your help on the forum consist of .. ???

About average, I guess...

[pieterg]

I've never heard of such a setting, haven't seen it neither in the menu nor in the e2 code.
e2 goes out of standby on the same channel where you left it, when entering standby.

[Dimitrij]

I've never heard of such a setting, haven't seen it neither in the menu nor in the e2 code.
e2 goes out of standby on the same channel where you left it, when entering standby.

Soon to be a plug-in .

[guffdaddy]

Quite possibly it was a plugin (or part of a plugin). It's not biggie, just helpful as I find sometimes when the box comes out of standby it has lost the EPG for the DTT channels, and setting one of the DTT channels as default means it updated EPG as soon as it came out of standby.

Also immediately switching to a DTT channel doesn't put unneccessary pressure on network links, if you know what I mean...

[Dimitrij]

I've never heard of such a setting, haven't seen it neither in the menu nor in the e2 code.
e2 goes out of standby on the same channel where you left it, when entering standby.

know you're very busy man.
If you find time, then look at these additions to the GUI enigma2.
Can they be useful for openPLi?


ChannelSelection.py
1)use startup service on leave standby, line 18-138,1245-1251,1293-1295,1304-13021
2)Sky Deutschland 19.2E Subservices,line 1104-1109
3)service count,line 1008-1019,1065-1071
4)add HD-channels list,line 1023-1030,1048-1051,1087-1090

HdmiCEC
Wakeup deepstandby at zap timer???? #Sorry, I'm not English mother tongue.
plugin.py,line 62-64
HdmiCec.py,line 3-9,35-37,58-73

VirtualKeyBoard.py
Added Russian keyboard layout,line 167-182,297-306

Edited by Dima73, 20 October 2011 - 07:37.

[pieterg]

can you make patches, so we can see what the changes are?

[Dimitrij]

I can not.
But try to learn .
Without knowledge of English is very difficult.

[rodak]

Hello, old thread, but is this possible? Select a channel to view when the box wakes from standby? Perfect for children, just turn on TV, hdmi cec wakes the box, and baaaam Disney Channel :-)

[littlesat]

How did you find this old topic...?

What can be done is when we configurr a startup service that when we put a box in standby that after e.g. 10 minutes we go to the startup service, but when we turn it on before these 10 minutes it falls back to the last service... It reaches it's goal and it saves an extra config.

[Dimitrij]

use  enigma2-plugin-systemplugins-standbystartupservice in feed

[rodak]

How did you find this old topic...?

What can be done is when we configurr a startup service that when we put a box in standby that after e.g. 10 minutes we go to the startup service, but when we turn it on before these 10 minutes it falls back to the last service... It reaches it's goal and it saves an extra config.

Google :-)

[Erik Slagter]

use  enigma2-plugin-systemplugins-standbystartupservice in feed

I think that's even a better solution.

[rodak]

use enigma2-plugin-systemplugins-standbystartupservice in feed

use enigma2-plugin-systemplugins-standbystartupservice in feed

I think that's even a better solution.

Works great, thanks :-) But maybe this should be a part of the pli? Since there is "startup service from deep standby" it feels strange that there is none for standby.