Hi All,
I'm new to the forum but not to linux receivers in general, but I need some specific help as the other forums that I'm active on have not been able to help as yet.
I'm using a fairly recent open pli build on a trusty 500s, but I'm struggling with trying to block out some problem ip login attempts.
I used to be able to manage this perfecetly fine along with all other kinds of scripts, but the pli image has got me beat at the moment, along with other simple scripts.
Would someone with a little more knowledge than me with pli images for 500s be so kind as to help out with some steps or instructions on how to block out incoming ip addresses. I can't do this at router level so I need to manage this via the receiver.
Thanks in advance,
D
13 replies to this topic
Re: Block IP address help needed #2
-
- Senior Member
- 1,197 posts
+1
Neutral
Posted 13 October 2011 - 21:49
Why do you let anybody access your box at all ?
Put it behind a NAT router and you are done.
Or are you sharing your card with others ?
Put it behind a NAT router and you are done.
Or are you sharing your card with others ?
Regards,
SnijdeA.
VU+ Duo 4K SE
If you think nobody cares, try missing a couple of payments.
Re: Block IP address help needed #3
-
- PLi® Core member
- 14,055 posts
+298
Excellent
Posted 14 October 2011 - 07:02
What access? Samba? FTP? NFS? HTTP? CCcam?
Real musicians never die - they just decompose
Re: Block IP address help needed #4
-
- Senior Member
- 4,157 posts
+198
Excellent
Posted 14 October 2011 - 20:30
We all know the answer to that I think... I don't think there will be a followup from "dekd" posted that can pass the forumrulez 
@Camping: ZGemma H.2S, Technisat Multytenne 4-in-1 @Home: Edision Mini 4K, Wave Frontier T55, EMP Centauri EMP DiSEqC 8/1 switch, 4x Inverto Ultra Black single LNB
Re: Block IP address help needed #5
-
- Senior Member
- 1,197 posts
+1
Neutral
Posted 14 October 2011 - 21:25
Really ? 
Edited by SnijdeA, 14 October 2011 - 21:26.
Regards,
SnijdeA.
VU+ Duo 4K SE
If you think nobody cares, try missing a couple of payments.
Re: Block IP address help needed #6
-
- Member
- 3 posts
0
Neutral
Posted 15 October 2011 - 08:58
I'm sharing a free to air card !
Is this against your rules
really curious as to why this functionality is catered for within the image if it is frowned upon?
Is this against your rules
really curious as to why this functionality is catered for within the image if it is frowned upon?
Edited by dekd, 15 October 2011 - 09:02.
Re: Block IP address help needed #7
-
- PLi® Core member
- 70,839 posts
+1,832
Excellent
Posted 15 October 2011 - 09:53
Like there are legal and illegal things you can do with an axe, you can use the software we provide in a legal way, or in an illegal way.
With OpenPLi, softcams are required to legally watch TV using your own subscribers card.
Softcams can also be used to share that card with another box you have in your house. This becomes the grey area, but most providers allow you to do this.
You can also use them to share them with other people, and even charge those people for using your card. The situation has now become black.
The rules are pretty clear, whatever you do with the 'axe' that we provide is your business, all we ask is that you don't pull us into whatever you're doing. Period.
With OpenPLi, softcams are required to legally watch TV using your own subscribers card.
Softcams can also be used to share that card with another box you have in your house. This becomes the grey area, but most providers allow you to do this.
You can also use them to share them with other people, and even charge those people for using your card. The situation has now become black.
The rules are pretty clear, whatever you do with the 'axe' that we provide is your business, all we ask is that you don't pull us into whatever you're doing. Period.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Block IP address help needed #8
-
- Senior Member
- 4,157 posts
+198
Excellent
Posted 15 October 2011 - 11:30
Never heard like a thing as FTA card. Maybe you are referring to a German HD+ card? Isn't FTA either. Sharing is also not allowed.
If you want to fix your situation place a firewall appliance between your wan gateway and homenetwork.
If you want to fix your situation place a firewall appliance between your wan gateway and homenetwork.
@Camping: ZGemma H.2S, Technisat Multytenne 4-in-1 @Home: Edision Mini 4K, Wave Frontier T55, EMP Centauri EMP DiSEqC 8/1 switch, 4x Inverto Ultra Black single LNB
Re: Block IP address help needed #9
-
- Member
- 3 posts
0
Neutral
Posted 15 October 2011 - 12:49
Totally appreciate all the comments, but I only asked a very simple question, which is irrelevant, IMHO to the end use.....
It can be done, but as mentioned, I do take on board the comments !
Blocking IP addresses is a function with cron and I got stuck, nothing more than that.
http://www.sky.com/s...o-air-channels/
No worries, obviously wrong forum for the curious user of pli....
It can be done, but as mentioned, I do take on board the comments !
Blocking IP addresses is a function with cron and I got stuck, nothing more than that.
http://www.sky.com/s...o-air-channels/
No worries, obviously wrong forum for the curious user of pli....
Re: Block IP address help needed #10
-
- PLi® Ex-Leden
- 14,151 posts
+52
Good
Posted 15 October 2011 - 16:37
You could install the firewall (it's in our downloads).
I never used it, so I don't know all the details. After install you will find a file in /var in which you can block ports and IP addresses. Also, don't forget to activate the firewall in the menu "services to run".
I never used it, so I don't know all the details. After install you will find a file in /var in which you can block ports and IP addresses. Also, don't forget to activate the firewall in the menu "services to run".
Many answers to your question can be found in our wiki: http://openpli.org/wiki
Re: Block IP address help needed #11
-
- Senior Member
- 1,197 posts
+1
Neutral
Posted 15 October 2011 - 21:49
How does one need a card for tree to air stations ?I'm sharing a free to air card !
Is this against your rules
Regards,
SnijdeA.
VU+ Duo 4K SE
If you think nobody cares, try missing a couple of payments.
Re: Block IP address help needed #12
-
- PLi® Core member
- 70,839 posts
+1,832
Excellent
Posted 15 October 2011 - 22:26
The free-to-air channels as described on the page linked to DO NOT require a smartcard. They are free-to-air.
"Enjoy even more entertainment with more than 240 free-to-air non-subscription digital channels*, which come free as part of any Sky TV Package you choose - that's four times more than the number of channels Freeview has available."
"Enjoy even more entertainment with more than 240 free-to-air non-subscription digital channels*, which come free as part of any Sky TV Package you choose - that's four times more than the number of channels Freeview has available."
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Block IP address help needed #13
-
- Senior Member
- 4,157 posts
+198
Excellent
Posted 15 October 2011 - 22:49
What a joke, this guy think he needs a card to view FTA channels or at least he tries to fool us
@Camping: ZGemma H.2S, Technisat Multytenne 4-in-1 @Home: Edision Mini 4K, Wave Frontier T55, EMP Centauri EMP DiSEqC 8/1 switch, 4x Inverto Ultra Black single LNB
Re: Block IP address help needed #14
-
- PLi® Core member
- 70,839 posts
+1,832
Excellent
Posted 16 October 2011 - 09:31
Maybe he's confused.
You used to have FTV (free-to-view) channels, like the ITV's and Channel4, for which you needed a SKY card, but no subscription. Afaik since freeview that is no longer the case, these are now FTA.
You used to have FTV (free-to-view) channels, like the ITV's and Channel4, for which you needed a SKY card, but no subscription. Afaik since freeview that is no longer the case, these are now FTA.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Also tagged with one or more of these keywords: 500s
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users
