6 replies to this topic
#1
Posted 5 November 2011 - 13:21
Hello,
I am using ET9000 with ET9x00 image from 20111104.
Booting the box works fine, also watching tv over Scart is no problem.
But after cutting some movies and switching back to tv, I often get a black screen, but audio and menu is available. Also recorded movies have a black screen but audio.
I can only sometimes get the tv-image back by using the sat-finder and switch through both tuners. Signal is present there on both tuners.
Restarting the ET9000 solves the problem, but it is no solution.
This bug came first with ET9x00 images, before with ET9000 images and linux 2.6.31 I had not such problems.
Regards, Dascon
I am using ET9000 with ET9x00 image from 20111104.
Booting the box works fine, also watching tv over Scart is no problem.
But after cutting some movies and switching back to tv, I often get a black screen, but audio and menu is available. Also recorded movies have a black screen but audio.
I can only sometimes get the tv-image back by using the sat-finder and switch through both tuners. Signal is present there on both tuners.
Restarting the ET9000 solves the problem, but it is no solution.
This bug came first with ET9x00 images, before with ET9000 images and linux 2.6.31 I had not such problems.
Regards, Dascon
Re: ET9000 black screen but menu and audio #2
Posted 5 November 2011 - 13:35
Could you please describe an exact scenario when this happens. I read some look-a-like reports (also on the clarktech-xtrend forum)... I saw this happening two times after intensive debugging and starting/stopping enigma2... But I never found a way to force it.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: ET9000 black screen but menu and audio #3
Re: ET9000 black screen but menu and audio #4
Re: ET9000 black screen but menu and audio #5
Posted 5 November 2011 - 17:16
I receive this error on two different situations:
1. Cut editor
Use cut editor and prepare a recorded movie for cutting, after exit of the cut editor my tv picture gets black, but I can still hear audio and use the menu, it is also possible to switch channels, but picture stays black.
During this state also recorded movies have only audio, no video, but menu is visible.
It is only possible to get the picture back by using sat finder, I switch to tuner B and to DVB-S2, then exit sat finder, picture stays still black, but after switching to a different channel it sometimes gets back to normal.
Movies recorded during this black screen state are recorded fine, including video and audio. So it seems that just tv output is like during standby.
2. Standby-mode
If I put my box to standby, sometimes it awakes with black screen, but audio and menu is working.
So there is no guarantee to get this black screen, but reproduce by using standby-mode works mostly, reproduce by using cut editor works for me nearly as good as standby-mode.
1. Cut editor
Use cut editor and prepare a recorded movie for cutting, after exit of the cut editor my tv picture gets black, but I can still hear audio and use the menu, it is also possible to switch channels, but picture stays black.
During this state also recorded movies have only audio, no video, but menu is visible.
It is only possible to get the picture back by using sat finder, I switch to tuner B and to DVB-S2, then exit sat finder, picture stays still black, but after switching to a different channel it sometimes gets back to normal.
Movies recorded during this black screen state are recorded fine, including video and audio. So it seems that just tv output is like during standby.
2. Standby-mode
If I put my box to standby, sometimes it awakes with black screen, but audio and menu is working.
So there is no guarantee to get this black screen, but reproduce by using standby-mode works mostly, reproduce by using cut editor works for me nearly as good as standby-mode.
Re: ET9000 black screen but menu and audio #6
Posted 5 November 2011 - 22:22
I get this problem, when i but the box in standby (1 hour or more ). When i put i back on sometimes i get only sound and menu.
Hello,
i can confirm i have same problems with et5000 too. Im not absulutely sure but i think when this happend im getting this in dmesg.
aqueue:src: page allocation failure: order:4, mode:0xd0 Call Trace: [<80551ec0>] dump_stack+0x8/0x34 [<800899f8>] warn_alloc_failed+0xc4/0x144 [<8008a5c0>] __alloc_pages_nodemask+0x40c/0x678 [<800be090>] cache_alloc_refill+0x3cc/0x728 [<800be53c>] __kmalloc+0x150/0x158 [<e077855c>] BXVD_OpenChannel+0xbc/0x5f8 [dvb] [<e06a70f0>] NEXUS_VideoDecoder_P_OpenChannel+0x260/0x530 [dvb] [<e06a73f4>] NEXUS_VideoDecoder_SetPowerState+0x34/0xe4 [dvb] [<e06a9160>] NEXUS_VideoDecoder_SetDisplayConnection_priv+0x78/0x158 [dvb] [<e07a7f68>] NEXUS_VideoInput_P_ConnectVideoDecoder+0x128/0x168 [dvb] [<e07ab254>] NEXUS_VideoWindow_AddInput_impl+0x84/0x1e4 [dvb] [<e06b2140>] NEXUS_VideoWindow_AddInput+0x30/0x50 [dvb] [<e0683e10>] connect_video_inputs+0x88/0xd4 [dvb] [<e068086c>] dvb_video_open+0xac/0xd4 [dvb] [<803dd9b4>] dvb_device_open+0x10c/0x1e4 [<800c6898>] chrdev_open+0x128/0x1e4 [<800bfc38>] __dentry_open+0x16c/0x3e8 [<800bff94>] nameidata_to_filp+0x64/0x78 [<800d1ca0>] do_last+0xc4/0x840 [<800d3650>] path_openat+0xc4/0x43c [<800d3b08>] do_filp_open+0x44/0xbc [<800bf9b8>] do_sys_open+0x110/0x1f8 [<8000ecfc>] stack_done+0x20/0x40 Mem-Info: Normal per-cpu: CPU 0: hi: 90, btch: 15 usd: 11 CPU 1: hi: 90, btch: 15 usd: 0 active_anon:5643 inactive_anon:5698 isolated_anon:0 active_file:254 inactive_file:543 isolated_file:0 unevictable:0 dirty:0 writeback:146 unstable:0 free:10310 slab_reclaimable:502 slab_unreclaimable:2692 mapped:767 shmem:10 pagetables:119 bounce:0 Normal free:41240kB min:4096kB low:5120kB high:6144kB active_anon:22572kB inacti ve_anon:22792kB active_file:1016kB inactive_file:2172kB unevictable:0kB isolated (anon):0kB isolated(file):0kB present:260096kB mlocked:0kB dirty:0kB writeback:5 84kB mapped:3068kB shmem:40kB slab_reclaimable:2008kB slab_unreclaimable:10768kB kernel_stack:752kB pagetables:476kB unstable:0kB bounce:0kB writeback_tmp:0kB p ages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 0 Normal: 1820*4kB 1897*8kB 1116*16kB 27*32kB 1*64kB 0*128kB 0*256kB 0*512kB 0*102 4kB 0*2048kB 0*4096kB = 41240kB 5186 total pagecache pages 4379 pages in swap cache Swap cache stats: add 3501741, delete 3497362, find 911526/1836313 Free swap = 2052076kB Total swap = 2097148kB 65536 pages RAM 35554 pages reserved 4105 pages shared 15378 pages non-shared
Enigma2 Transcoder win/lin: http://e2transcoder....nscoder_070.zip
Re: ET9000 black screen but menu and audio #7
Also tagged with one or more of these keywords: ET9000
OpenPLI auf et9000 mit crashlog bei rebootStarted by manyone, 8 Dec 2019 et9000 |
|
|||
ET9000 with SSD crashesStarted by erwin288, 26 Jan 2019 ET9000, SSD, Xtrend, crash |
|
|||
Sundtek USB Kabel tuner ET9000Started by KBDE, 23 Jan 2019 sundtek, cablescan, ET9000 |
|
|||
Geluid stopt bij afspelen MKV ET9000Started by jbnl, 24 Nov 2018 mkv, et9000, geluid |
|
|||
Xbox One USB tuner op de ET9000Started by jbnl, 4 Sep 2017 usb, xtrend, et9000, tuner |
|
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users