Jump to content


Photo

Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit


  • Please log in to reply
2062 replies to this topic

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #1501 1455

  • Senior Member
  • 407 posts

+12
Neutral

Posted 12 March 2019 - 13:00

is it possible to active and use numeric keypad in enigma2pc?

 

For what? What plugin requires this? I use LIRC and the numeric keys of the remote duplicate letters as in the original receiver.


GIT OpenPLi-PC_Python2

GIT OpenPLi-PC_Python3

 

 

 

 

 

 

 

 

 

 

 

 
 

 

 


Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #1502 momi133

  • Senior Member
  • 74 posts

0
Neutral

Posted 12 March 2019 - 13:15

 

is it possible to active and use numeric keypad in enigma2pc?

 

For what? What plugin requires this? I use LIRC and the numeric keys of the remote duplicate letters as in the original receiver.

 

 

I want to use numeric keypad of laptop keyboard for increasing speed. I don't have LIRC!

 

Does ANY LIRC work fine with enigma2pc?

 

notes in https://github.com/Raider05/enigma2pc:

2)
Some remote control keys are remapped to local PC keyboard

RED -> F1
GREEN -> F2
YELLOW -> F3
BLUE -> F4

VOL UP -> + (numeric pad) or +
VOL DOWN -> - (numeric pad) or -

NEXT CHANN. -> ARROW DOWN
PREV CHANN. -> ARROW UP
NEXT BOUQUET -> PAGE DOWN
PREV BOUQUET -> PAGE UP

EXIT -> ESC
MENU -> SPACE
INFO -> I or F5
OK -> ENTER

EPG -> E or F6
POWER -> F10
RECORD -> R
TV -> T
VIDEO -> V
AUDIO -> A
RADIO -> D
MUTE -> M
TIMESHIFT -> P

QUIT ENIGMA2 -> X
FULL SCREEN MODE -> F11

How we can change this keys? or remap ?


Edited by momi133, 12 March 2019 - 13:20.


Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #1503 1455

  • Senior Member
  • 407 posts

+12
Neutral

Posted 12 March 2019 - 16:27

Yes of course. You need to buy a suitable remote and make the simplest IR-receiver on the COM port (internal). Then run the LIRC installation script and configure the buttons of remote.

 

How we can change this keys? or remap ?

 

 

rcxlib.cpp

Of course, it will be necessary to recompile enigma2, but manually.


Edited by 1455, 12 March 2019 - 16:28.

GIT OpenPLi-PC_Python2

GIT OpenPLi-PC_Python3

 

 

 

 

 

 

 

 

 

 

 

 
 

 

 


Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #1504 1455

  • Senior Member
  • 407 posts

+12
Neutral

Posted 16 March 2019 - 18:32

If anyone has the opportunity to download the binary files of the teletext plugin from the receiver with Dream Multimedia firmware, then send me or give the link please. I'll try to decompile this plugin. As is known, its source is open only conditionally. Previously I read that this plugin doesn't use outdated tuxtxt.


GIT OpenPLi-PC_Python2

GIT OpenPLi-PC_Python3

 

 

 

 

 

 

 

 

 

 

 

 
 

 

 


Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #1505 juankrlos

  • New Member
  • 3 posts

0
Neutral

Posted 20 March 2019 - 13:50

this is the link
https://cloud.mail.r.../97G7/BPBnDtJxz
for install in ubuntu 18.04?
i need confirm correct link for my installation

regards

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #1506 1455

  • Senior Member
  • 407 posts

+12
Neutral

Posted 20 March 2019 - 17:48

this is the link
https://cloud.mail.r.../97G7/BPBnDtJxz
for install in ubuntu 18.04?
i need confirm correct link for my installation

regards

Yes. 


GIT OpenPLi-PC_Python2

GIT OpenPLi-PC_Python3

 

 

 

 

 

 

 

 

 

 

 

 
 

 

 


Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #1507 2Easy

  • Member
  • 7 posts

+1
Neutral

Posted 25 March 2019 - 05:36

I found the problem: There was an old automake package (with old aclocal) installed.

After I installed a newer one the compilation worked without problems!

Thanks everybody for helping!

Same here, it needs to install a newer one


Edited by 2Easy, 25 March 2019 - 05:36.


Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #1508 rachid-tvsat

  • Member
  • 11 posts

0
Neutral

Posted 30 April 2019 - 10:43

thank you all
Is there anyone help me install this system on Ubuntu 16.04

Intel Core i5 9500 3.0 Ghz + Nvidia GTX 1070 8 Gb

TBS 6522 Multi-standard Dual Tuner + Ubuntu 18.04.6 Lts x64


Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #1509 2free

  • Member
  • 19 posts

0
Neutral

Posted 2 June 2019 - 18:10

plaese

how can i run e2pc without dvb card



Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #1510 1455

  • Senior Member
  • 407 posts

+12
Neutral

Posted 3 June 2019 - 10:08

No difference. Run /usr/local/e2/bin/autostart.sh as root or install 'classicmenu-indicator' and see 'enigma2' icons in 'Audio & Video' menu.

Please use search in the forum.


GIT OpenPLi-PC_Python2

GIT OpenPLi-PC_Python3

 

 

 

 

 

 

 

 

 

 

 

 
 

 

 


Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #1511 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 31 August 2019 - 19:11

Hi. Building sucess, but when run enigma2 appear first screen with spinner and stop:

frank@Frank:/usr/local/e2/bin$ ./enigma2
PYTHONPATH: /usr/local/e2/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA_DEBUG_LVL=3
Display resolution 1920 1080
XINE-LIB version: 1.2.9-20190318hg14336+dirty
configfile  /usr/local/e2/share/enigma2/xine.conf
Available post plugins:  boxblur denoise3d enigma enigma_audio enigma_video eq eq2 expand fftgraph fftscope fill goom invert mosaico noise oscope pp stretch switch tdaudioanalyzer tvtime unsharp upmix upmix_mono vdr vdr_audio vdr_video volnorm
use vo_driver: vdpau
use ao_driver: alsa
vo_vdpau: vdpau API version : 1
vo_vdpau: vdpau implementation description : G3DVL VDPAU Driver Shared Library version 1.0
vo_vdpau: maximum output surface size is 16384x16384
vo_vdpau: hold a maximum of 10 video output surfaces for reuse
vo_vdpau: using 3 output surfaces of size 1920x1080 for display queue
vo_vdpau: this hardware doesn't support h264.
vo_vdpau: this hardware doesn't support vc1.
vo_vdpau: this hardware doesn't support mpeg1/2.
vo_vdpau: this hardware doesn't support mpeg4-part2.
video_out: can't raise nice priority by 2: Operation not permitted
audio_alsa_out : supported modes are 8bit 16bit 24bit 32bit mono stereo (4-channel not enabled in xine config) (4.1-channel not enabled in xine config) (5-channel not enabled in xine config) (5.1-channel not enabled in xine config) (a/52 and DTS pass-through not enabled in xine config)
video_decoder: can't raise nice priority by 1: Operation not permitted
xine: found input plugin  : file input plugin
failed to read 8 bytes at pos 84222
xine: found demuxer plugin: AVI/RIFF demux plugin
ffmpeg_video_dec: VAAPI Enabled disabled by driver.
ffmpeg_video_dec: direct rendering enabled
demux_avi: video and audio streams are ended
ffmpeg_video_dec: color matrix #5 [ITU-R 470 BG / SDTV]
static post plugins (from command line): enigma_video;enigma_audio;upmix_mono
    loaded plugins (type 1.0): enigma_video
    loaded plugins (type 2.0): enigma_audio upmix_mono
Enable re-wiring post plugins
        wiring enigma_video[out] -> [in]video_out
        wiring    stream
[out] -> [in]enigma_video        wiring upmix_mono[out] -> [in]audio_out
        wiring enigma_audio[out] -> [in]upmix_mono
        wiring     stream[out] -> [in]enigma_audiosetResolution 720 576
FULLSCREEN EVENT
Event Received!
XNextEvent 21
XNextEvent 22
XNextEvent 22
XNextEvent 19
XNextEvent 12
XNextEvent 22
XNextEvent 12
XNextEvent 12
XNextEvent 12
video_out_vdpau: b 0 c 128 s 128 h 0 [ITU-R 470 BG / SDTV]
Event Received!
Event Received!
Event Received!
Event Received!
Event Received!
Event Received!
Event Received!
I have XINE event ---  1
XINE_EVENT_UI_PLAYBACK_FINISHED
adapter1/demux0: reset stateadapter2/demux0: reset stateadapter0/demux0: reset stateadapter0/demux1: reset state[MAIN] executing main
WARNING: couldn't open profile file!
Traceback (most recent call last):
  File "/usr/local/e2/lib/enigma2/python/mytest.py", line 22, in <module>
    import Components.SetupDevices
ImportError: No module named Components.SetupDevices
[eDVBDB] couldn't save lame channel db!
Event Received!
Event Received!
[eTextPara] FONT 'Regular' MISSING!
[eTextPara] FONT 'Regular' MISSING!
Event Received!
Event Received!
Event Received!
frank@Frank:/usr/local/e2/bin$

Edited by frankviana, 31 August 2019 - 19:12.

Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #1512 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 31 August 2019 - 19:41

Now, another error after compile again option 2: libs:

 

Event Received!
I have XINE event ---  1
XINE_EVENT_UI_PLAYBACK_FINISHED
adapter1/demux0: reset stateadapter0/demux0: reset stateadapter0/demux1: reset state[MAIN] executing main
WARNING: couldn't open profile file!
Traceback (most recent call last):
  File "/usr/local/e2/lib/enigma2/python/mytest.py", line 26, in <module>
    from Screens import InfoBar
  File "/usr/local/e2/lib/enigma2/python/Screens/InfoBar.py", line 5, in <module>
    import Screens.MovieSelection
  File "/usr/local/e2/lib/enigma2/python/Screens/MovieSelection.py", line 1, in <module>
    from Screen import Screen
  File "/usr/local/e2/lib/enigma2/python/Screens/Screen.py", line 4, in <module>
    from Components.GUISkin import GUISkin
ImportError: No module named Components.GUISkin
[eDVBDB] couldn't save lame channel db!
Event Received!
[eTextPara] FONT 'Regular' MISSING!
[eTextPara] FONT 'Regular' MISSING!
Event Received!
Event Received!
 


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #1513 WanWizard

  • PLi® Core member
  • 70,562 posts

+1,815
Excellent

Posted 31 August 2019 - 20:27

Does /usr/local/e2/lib/enigma2/python/Components/GUISkin.pyo (or .py) exist?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #1514 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 31 August 2019 - 20:51

It’s long time ago that I used it. But in the past you had to execute it with root rights. It seems you start it without.
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #1515 mrvica

  • Senior Member
  • 1,261 posts

+86
Good

Posted 1 September 2019 - 07:15

If anyone has the opportunity to download the binary files of the teletext plugin from the receiver with Dream Multimedia firmware, then send me or give the link please. I'll try to decompile this plugin. As is known, its source is open only conditionally. Previously I read that this plugin doesn't use outdated tuxtxt.

you can fetch the images here, they are .tar.xz, you can easilly extract the plugin with 7zip

https://dreamboxupdate.com/

the plugin TeleTxt is in extensions, .py code is free but this would be the problem

from enigma import Teletext as TeletextInterface

that is in enigma2 binary (core) what is closed source, means impossible



Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #1516 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 2 September 2019 - 15:39

Does /usr/local/e2/lib/enigma2/python/Components/GUISkin.pyo (or .py) exist?

 

GUISkin.py

 

Now error when running with root permissions:

root@Frank:/usr/local/e2/bin# ./enigma2
PYTHONPATH: /usr/local/e2/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA_DEBUG_LVL=3
Display resolution 1920 1080
XINE-LIB version: 1.2.9-20190318hg14336+dirty
configfile  /usr/local/e2/share/enigma2/xine.conf
Available post plugins:  boxblur denoise3d enigma enigma_audio enigma_video eq eq2 expand fftgraph fftscope fill goom invert mosaico noise oscope pp stretch switch tdaudioanalyzer tvtime unsharp upmix upmix_mono vdr vdr_audio vdr_video volnorm
use vo_driver: auto
use ao_driver: auto
vo_vdpau: vdpau API version : 1
vo_vdpau: vdpau implementation description : G3DVL VDPAU Driver Shared Library version 1.0
vo_vdpau: maximum output surface size is 16384x16384
vo_vdpau: hold a maximum of 10 video output surfaces for reuse
vo_vdpau: using 3 output surfaces of size 1920x1080 for display queue
vo_vdpau: this hardware doesn't support h264.
vo_vdpau: this hardware doesn't support vc1.
vo_vdpau: this hardware doesn't support mpeg1/2.
vo_vdpau: this hardware doesn't support mpeg4-part2.
xine: found input plugin  : file input plugin
failed to read 8 bytes at pos 84222
xine: found demuxer plugin: AVI/RIFF demux plugin
ffmpeg_video_dec: VAAPI Enabled disabled by driver.
ffmpeg_video_dec: direct rendering enabled
demux_avi: video and audio streams are ended
ffmpeg_video_dec: color matrix #5 [ITU-R 470 BG / SDTV]
static post plugins (from command line): enigma_video;enigma_audio;upmix_mono
    loaded plugins (type 1.0): enigma_video
    loaded plugins (type 2.0): enigma_audio upmix_mono
Enable re-wiring post plugins
        wiring enigma_video[out] -> [in]video_out
        wiring    stream
[out] -> [in]enigma_video        wiring upmix_mono[out] -> [in]audio_out
        wiring enigma_audio[out] -> [in]upmix_mono
        wiring     stream[out] -> [in]enigma_audiosetResolution 720 576
FULLSCREEN EVENT
Event Received!
XNextEvent 21
XNextEvent 22
XNextEvent 22
XNextEvent 19
XNextEvent 12
XNextEvent 22
XNextEvent 12
XNextEvent 12
XNextEvent 12
video_out_vdpau: b 0 c 128 s 128 h 0 [ITU-R 470 BG / SDTV]
Event Received!
Event Received!
Event Received!
I have XINE event ---  1
XINE_EVENT_UI_PLAYBACK_FINISHED
adapter1/demux0: reset stateadapter1/demux1: reset stateadapter0/demux0: reset stateadapter0/demux1: reset state[MAIN] executing main
Event Received!
Event Received!
setResolution 1280 720
Event Received!
Event Received!
Traceback (most recent call last):
  File "/usr/local/e2/lib/enigma2/python/mytest.py", line 551, in <module>
    Components.UsageConfig.InitUsageConfig()
  File "/usr/local/e2/lib/enigma2/python/Components/UsageConfig.py", line 38, in InitUsageConfig
    choicelist.append((str(i), ngettext("%d pixel wide", "%d pixels wide", i) % i))
NameError: global name 'ngettext' is not defined
Unloading post plugins
Unload enigma_video failed: plugin enabled and in use
Unload enigma_audio failed: plugin enabled and in use
Unload upmix_mono failed: plugin enabled and in use
I have XINE event ---  7
xine_event_handler(): event->type: 7
ffmpeg_video_dec: used 1 DR1 frames.
video_out: max frames used: 1 of 22
video_out: early wakeups: 4 of 48
root@Frank:/usr/local/e2/bin#

 


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #1517 WanWizard

  • PLi® Core member
  • 70,562 posts

+1,815
Excellent

Posted 2 September 2019 - 17:58

Looks like you're missing the Python gettext library.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #1518 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 2 September 2019 - 18:18

Looks like you're missing the Python gettext library.

 

root@Frank:~# apt-get install gettext-base
Lendo listas de pacotes... Pronto
Construindo árvore de dependências       
Lendo informação de estado... Pronto
gettext-base is already the newest version (0.19.8.1-6ubuntu0.3).
0 pacotes atualizados, 0 pacotes novos instalados, 0 a serem removidos e 45 não atualizados.
root@Frank:~# apt-get install gettext
Lendo listas de pacotes... Pronto
Construindo árvore de dependências       
Lendo informação de estado... Pronto
gettext is already the newest version (0.19.8.1-6ubuntu0.3).
0 pacotes atualizados, 0 pacotes novos instalados, 0 a serem removidos e 45 não atualizados.
root@Frank:~#
 


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #1519 WanWizard

  • PLi® Core member
  • 70,562 posts

+1,815
Excellent

Posted 2 September 2019 - 18:32

That is gettext itself, not the python library?

 

I am not an Ubuntu user, so I don't know what the installation procedure is, or how it is called. With pip, it is https://pypi.org/pro...python-gettext/.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #1520 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 2 September 2019 - 19:35

That is gettext itself, not the python library?

 

I am not an Ubuntu user, so I don't know what the installation procedure is, or how it is called. With pip, it is https://pypi.org/pro...python-gettext/.

 

Now, I have first option to choose language, but after press ok, green screen:

 

After remove iptv player, too crash.

 

crash logs:

 

Attached File  crashlog.zip   680.42KB   1 downloads


Edited by frankviana, 2 September 2019 - 19:37.

Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)



2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users