2062 replies to this topic

[ptergrand]

thank you very much for the program

[jo20201]

new issue  the sound when change the channel gone ,and restart enigma2 more three times to work ??????????

Edited by jo20201, 23 May 2020 - 19:08.

[milano]

new issue  the sound when change the channel gone ,and restart enigma2 more three times to work ??????????

 

same issue here with ubuntu 20.04 ,, I think it got something with the alsa driver
but it's ok on 18.04

[1455]

same issue here with ubuntu 20.04

Please wait.

[jo20201]

new issue  the sound when change the channel gone ,and restart enigma2 more three times to work ??????????

i was fix this issue with remove sound driver and reinstall

 

Remove the ALSA packages.

1. sudo apt-get --purge remove linux-sound-base alsa-base alsa-utils
   

2. Reinstall the same packages.

   sudo apt-get install linux-sound-base alsa-base alsa-utils
   

 

my OS ubuntu 20.04

Edited by jo20201, 23 May 2020 - 21:57.

[jo20201]

 

new issue  the sound when change the channel gone ,and restart enigma2 more three times to work ??????????

i was fix this issue with remove sound driver and reinstall

 

Remove the ALSA packages.

1. sudo apt-get --purge remove linux-sound-base alsa-base alsa-utils
   

2. Reinstall the same packages.

   sudo apt-get install linux-sound-base alsa-base alsa-utils
   

 

my OS ubuntu 20.04

 

sorry the issue back again i don't know why

when change from free channel to scramble one and back again the sound gone  

[ptergrand]

video settings like this

[ptergrand]

video settings like this

Edited by ptergrand, 24 May 2020 - 07:12.

[ptergrand]

bunun gibi video ayarları

 

Attached Files

•  Screenshot_20200524_075703.png   299.65KB   4 downloads

[1455]

I have changed and updated something. For example, subtitles have become more stable. Perhaps this will help.

However, don't set “Sound mode = auto” in OSD (Xine settings). Looking for your audio configuration using the 'aplay -l' command and set them on the OSD.

[1455]

Suppose I installed libxine2 and xine-ui from the Ubuntu 20.04 repositories and want to play THIS file recorded from the satellite with the vaapi driver. The default is video.processing.ffmpeg_enable_vaapi: 1.
The frames twitches in e2pc, exactly as in xine-ui, using IGPU and vaapi. Why does VLC play this file normally and with hardware acceleration, but xine-ui not? How to get xine working properly?

I can’t fix it instead of xine developers.

[1455]

https://linuxreviews.../Intel_graphics
Especially, I liked the phrase: "The kernel driver for Intel integrated graphics has been a complete and utter mess since kernel 5.1. Avoid using 5.3.x and 5.4.x kernels if you are using Intel integrated graphics".

[1455]

Recently, there was a way to fix watching avc and hevc channels on integrated Intel graphics with HEVCMain10 hardware support.
What about nvidia graphics cards? Everything is simple here. Need a powerful 8 core processor. In the xine.conf settings, specify

video.processing.ffmpeg_thread_count: 8

In this case, the average CPU load will be about 80%. No other is given.

 

 

 

 

 

 

[ptergrand]

DreamOSat CamManager Plugin 

 

I have to wonder why DreamOSat CamManager Plugin and similar plugins do not show up in plugins.

[1455]

ptergrand, plugins for e2pc must be adapted.

[ptergrand]

ptergrand, plugins for e2pc must be adapted.

thank you for your information

[ptergrand]

• s (main) System name = Linux
• 2020/06/12 21:36:03 00000000 s (main) Host name = star-Vostro-3670
• 2020/06/12 21:36:03 00000000 s (main) Release = 5.3.0-59-generic
• 2020/06/12 21:36:03 00000000 s (main) Version = #53~18.04.1-Ubuntu SMP Thu Jun 4 14:58:26 UTC 2020
• 2020/06/12 21:36:03 00000000 s (main) Machine = x86_64
• 2020/06/12 21:36:03 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 5075
• 2020/06/12 21:36:03 00000000 s (emu) OSCam-Emu version 798
• 2020/06/12 21:36:03 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2020/06/12 21:36:03 00000000 s (main) signal handling initialized
• 2020/06/12 21:36:03 00000000 s (config) 2 provid's loaded
• 2020/06/12 21:36:03 00000000 s (config) 5 service-id's loaded in 0 ms
• 2020/06/12 21:36:03 00000000 s (reader) emulator [emu] creating thread for device emulator
• 2020/06/12 21:36:03 00000000 s (main) waiting for local card init
• 2020/06/12 21:36:03 083D39B9 r (emu) Stream key delayer initialized
• 2020/06/12 21:36:03 083D39B9 r (emu) Stream relay server initialized
• 2020/06/12 21:36:03 083D39B9 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
• 2020/06/12 21:36:03 00000000 (emu) INFO: FFDecsa parallel mode = 128
• 2020/06/12 21:36:03 6AB6DA55 h (webif) webif: decompressed 172713 bytes back into 429032 bytes
• 2020/06/12 21:36:03 6AB6DA55 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
• 2020/06/12 21:36:04 083D39B9 r (reader) emulator [emu] card detected
• 2020/06/12 21:36:05 083D39B9 r (reader) emulator [emu] found card system emu
• 2020/06/12 21:36:05 083D39B9 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
• 2020/06/12 21:36:05 083D39B9 r (emu) Key file not found in: /usr/local/etc
• 2020/06/12 21:36:05 083D39B9 r (emu) Reading key file: /var/keys/softcam.key
• 2020/06/12 21:36:05 083D39B9 r (emu) WARNING: non-hex value in SoftCam.Key at " 0000000C reated Time:
• 2020/06/12 21:36:05 083D39B9 r (emu) WARNING: non-hex value in SoftCam.Key at " 0000000C OMPEL: NOW
• 2020/06/12 21:36:05 083D39B9 r (emu) WARNING: non-hex value in SoftCam.Key at ' 000ADDED powervu other
• 2020/06/12 21:36:05 083D39B9 r (emu) WARNING: non-hex value in SoftCam.Key at ' 0000000D ISCOVERY NETWORK
• 2020/06/12 21:36:05 083D39B9 r (emu) WARNING: non-hex value in SoftCam.Key at " 0000000D VB-S2 /8PSK
• 2020/06/12 21:36:05 083D39B9 r (emu) WARNING: non-hex value in SoftCam.Key at ' 0000000F ox Sport
• 2020/06/12 21:36:05 083D39B9 r (emu) WARNING: non-hex value in SoftCam.Key at " 0000000F IGHT NETWORK
• 2020/06/12 21:36:05 083D39B9 r (emu) WARNING: non-hex value in SoftCam.Key at " 0000000B YU TV
• 2020/06/12 21:36:05 083D39B9 r (emu) WARNING: non-hex value in SoftCam.Key at ' 0000000F OX NETWORK
• 2020/06/12 21:36:05 083D39B9 r (emu) Total keys in memory: W:0 V:6 N:0 I:11 F:1 G:0 P:296 T:59 A:0
• 2020/06/12 21:36:06 00000000 s (main) init for all local cards done
• 2020/06/12 21:36:06 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
• 2020/06/12 21:36:06 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
• 2020/06/12 21:36:06 00000000 s (anticasc) anti cascading disabled
• 2020/06/12 21:36:06 2EE25271 c (client) plain dvbapi-client granted (root, au=off)
• 2020/06/12 21:36:06 2EE25271 c (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
• 2020/06/12 21:36:06 2EE25271 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)
• 2020/06/12 21:36:06 2EE25271 c (dvbapi) Detected /dev/dvb/adapter1/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)
• 2020/06/12 21:36:06 2EE25271 c (dvbapi) ERROR: ioctl(CA_GET_DESCR_INFO): Bad address
• 2020/06/12 21:36:49 2EE25271 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1010 ECM_PID: 0AC4 PROVID: 000000
• 2020/06/12 21:36:49 2EE25271 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0656 ECM_PID: 0A60 PROVID: 000000
• 2020/06/12 21:36:49 2EE25271 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 06F8 ECM_PID: 0F74 PROVID: 000000
• 2020/06/12 21:36:49 2EE25271 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 092B ECM_PID: 0E6D PROVID: 000000
• 2020/06/12 21:36:49 2EE25271 c (dvbapi) Demuxer 0 found 4 ECM pids and 4 STREAM pids in CA PMT
• 2020/06/12 21:36:49 2EE25271 c (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 0
• 2020/06/12 21:36:49 2EE25271 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 1010 PROVID 000000 ECMPID 0AC4 ANY CHID PMTPID 0B28 VPID 0B8C
• 2020/06/12 21:36:49 00000000 >> OSCam << cardserver log switched, version 1.20_svn, build r11581-798 (x86_64-linux-gnu)
• 2020/06/12 21:36:49 2EE25271 c (dvbapi) ERROR: ioctl(CA_SET_DESCR_MODE): Bad address

 

why am i getting this error  

[roxette]

 

Can someone verify that Wifi signal & Max bitrate values works?

Attached Files

•  wifi.png   22.7KB   1 downloads

Edited by roxette, 14 June 2020 - 17:32.

[ptergrand]

Does the program have channel blind scan

[1455]

2020/06/12 21:36:49 2EE25271 c (dvbapi) ERROR: ioctl(CA_SET_DESCR_MODE): Bad address

 

why am i getting this error

 

 

  Just ignore it. You will find with Google that this is a whim of oscam on different box types.

 

Edited by 1455, 15 June 2020 - 20:03.