2062 replies to this topic

[if99nrg]

@shumifan50

Seems to be a Lnb High/Low voltage settings, usualy is meet it when have Diseq bad config or hardware incompatibility version.
In my case is the same structure on DM500HD, Openpli.

@nobdy9
thx

[leopold75]

Hello there!
Please can You help? I trying install openpliPC project by nobody9 on my ubuntu 10.10
Video is 01:00.0 VGA compatible controller: nVidia Corporation G80 [GeForce 8800 GTX] (rev a2)
There no VDPAU support. After compilation I see logo only - no sound, no video.
Can someone help - how to start openpliPC without VDPAU support?
I have power CPU (model name : Intel® Core™2 Quad CPU Q6600 @ 2.40GHz ) and 4G RAM

DVB-S@ adapter configured fine

[ 3512.595128] dvb-usb: found a 'Technotrend TT Connect S2-3600' in warm state.
[ 3512.595930] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 3512.596245] DVB: registering new adapter (Technotrend TT Connect S2-3600)
[ 3512.599769] dvb-usb: MAC address: XX:XX:XX:XX:XX:XX
[ 3512.621268] DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)...
[ 3512.621958] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/input/input5
[ 3512.622040] dvb-usb: schedule remote query interval to 500 msecs.
[ 3512.622049] dvb-usb: Technotrend TT Connect S2-3600 successfully initialized and connected.

So HD must be fine. Please help me start from begin.
Thank You!

[Raider05]

@nobody9
I also like the 1455 crash when switching to a HD channel
this log.
SD works fine, but how strange is switching: there is sound,
then video, then pause for 3-5 seconds and then begins to show the channel.
In xine.conf buffers audio and video are very small values ​​have changed,
but the same result. May be due to the value:

audio.synchronization.slow_fast_audio:1

in xine.conf?
A patch for lirc imposed but not compile,
cTimeMs not defined in lib/base/condVar.h and lib/base/condVar.cpp described, please add openPli_enigma2.patch
Time in OpenPLI shows incorrect system time changes the UTC, not pribavlyaet in local area, for me, UTC +4

[Seal]

nobody9:

what you added and removed yesterday evening?

nobody9 pushed to master at nobody9/openpliPC about 9 hours ago
    3e9b74a
	    Revert "merg openpli"
    162ddc4
	    Revert "merg openpli"
    View comparison for these 2 commits »
nobody9 pushed to master at nobody9/openpliPC about 10 hours ago
    a90d7ab
	    merg openpli
    641d2f3
	    merg openpli
    View comparison for these 2 commits »

[nobody9]

i has merge yesterdays update from openpli git, git merg says all ok, but enigma don´t compile, So i must add the changes from openpli manualy to my git.
I revert the merges that the compile works.

nobody9:

what you added and removed yesterday evening?

nobody9 pushed to master at nobody9/openpliPC about 9 hours ago
	3e9b74a
		Revert "merg openpli"
	162ddc4
		Revert "merg openpli"
	View comparison for these 2 commits »
nobody9 pushed to master at nobody9/openpliPC about 10 hours ago
	a90d7ab
		merg openpli
	641d2f3
		merg openpli
	View comparison for these 2 commits »

[nobody9]

all with dropouts on HD channels have "NVIDIA VDPAU Driver Shared Library Version 290.10", with 270.xx it works.

the audio.synchronization.slow_fast_audio=1 helps the sync of audio, without this i get many dropouts.

@nobody9
I also like the 1455 crash when switching to a HD channel
this log.
SD works fine, but how strange is switching: there is sound,
then video, then pause for 3-5 seconds and then begins to show the channel.
In xine.conf buffers audio and video are very small values ​​have changed,
but the same result. May be due to the value:

audio.synchronization.slow_fast_audio:1

in xine.conf?
A patch for lirc imposed but not compile,
cTimeMs not defined in lib/base/condVar.h and lib/base/condVar.cpp described, please add openPli_enigma2.patch
Time in OpenPLI shows incorrect system time changes the UTC, not pribavlyaet in local area, for me, UTC +4

[Seal]

nobody9:

Changed NVIDIA driver:
[...]
NVRM: loading NVIDIA UNIX x86 Kernel Module 270.41.19 Mon May 16 23:31:36 PDT 2011
[...]

But channels from polsat doesnt work... with old xine-lib and coguar_enigma enigma2 works wirh new xine-lib and coguar enigma2 not

It looks like xine-lib problem... but with VDR works... strange...

Logs from starting Enigma2 with polsat hd

 e2.zip   6.25KB   7 downloads

[Seal]

Other bug that i found that some time - enigma2 starts but i see osd and pli logo and nothing more - no channel screen (e2.log_bad), and for good start e2.log_ok.

Attached logs in zip file.  e2-logs.zip   13.75KB   3 downloads

[1455]

please pack all files in one archive
thanks

sd, hd sample or both?
Just want to remind you that decompression ts-files from bz2 takes a more time.

[nobody9]

The log bad are some issus that we don´t discus in the here.
at moment i have ESP America HD(19000 Kbps Video) runing without any error the diffrenz i have installed the VDPAU driver 260.xx , Enigma2 has a cpu usage from 35 %.

Other bug that i found that some time - enigma2 starts but i see osd and pli logo and nothing more - no channel screen (e2.log_bad), and for good start e2.log_ok.

Attached logs in zip file.  e2-logs.zip   13.75KB   3 downloads

[Seal]

nobody9:

with your enigma2 compilation and with this xine lib all channels works! polsat hd too

http://www.speedysha...0~e2pc-0.tar.gz

[nobody9]

both, better then i wait for every file 45 seconds to start the download

please pack all files in one archive
thanks

sd, hd sample or both?
Just want to remind you that decompression ts-files from bz2 takes a more time.

[nobody9]

I will look that i import this version into git
thanks for the test

nobody9:

with your enigma2 compilation and with this xine lib all channels works! polsat hd too

http://www.speedysha...0~e2pc-0.tar.gz

[Seal]

from one hour testing i think that xine-lib.old is more stable... strange.

[1455]

both, better then i wait for every file 45 seconds to start the download

Which version is recommended, xine-lib.old or new?
I updated git-tree just now, but people write what has become worse.

[Seal]

Which version is recommended, xine-lib.old or new?
I updated git-tree just now, but people write what has become worse.

xine-lib.old play screen on polish polsat hd channel - new xine-lib not... so if you dont have channels that are not working you can use xine-lib new... old is for these what have troubles

[nobody9]

@1455,

The xine-lib.old is the version from Cougar without AAC_LATM support.
The xine-lib is the new version with AAC_LATM support and changed TS file handling.
On my system work both versions.

both, better then i wait for every file 45 seconds to start the download

Which version is recommended, xine-lib.old or new?
I updated git-tree just now, but people write what has become worse.

[Seal]

Where engima stores EPG info? After every enigma restart its need to cache again

[nobody9]

@Seal,
in /hdd

Where engima stores EPG info? After every enigma restart its need to cache again

@all
i tested xine-lib opengl support, enigma2 has a cpu usages of 120% on HD channels with many dropouts

[Seal]

@all
i tested xine-lib opengl support, enigma2 has a cpu usages of 120% on HD channels with many dropouts

On which processor? Maybe on newest processors i5/i7 will work fine if someone have computer wit stron processors