2062 replies to this topic

[nobody9]

News from today:

Ported the last changes from openpli-git from yesterday

Thanks to Pli to implement the streaming-server into enigma2.

streaming and recording works without any problems
you can test the streaming with VLC open Network

http://ip-of-openpliPC:8001/sRef
example of a sRef 1:0:1:7001:436:1:C00000:0:0:0:

Recording a channel and watching other channel on the same transponder also works.
Testet with SD- and HD-Channels

[shumifan50]

#nobody9 & ambrosa:
Thanks for a brilliant bit of work(and that does NOT mean small) so far - your efforts are truly appreciated

I have finally got to the bottom of the vtuner issue:
It needs the latest device drivers (2nd stage bootloader) for the dreambox - that explains the "operation not supported" errors. The DM800 was on SSBL 75 and that is too old. I updated with the latest OpenPli 2 using dreamup and this updated the bootloader to 84, which now works.

Great work again - this is a peach!!!!!!!!!

Now to make the card reader work

[Seal]

@SEAL:
This one
http://www.amazon.co...24417116&sr=1-1

i have the same

[attaros]

Hi,

I wanted to know if this software works only with VTUNER software or a real DVB-S2 card as TT-S3200 would work too ?
(i am not a Ubuntu user......nor expert..).

Thanks
attaros

Im successfully using with TBS QBOX S2 card - works very well.

@nobody @Seal

Hi! I need help on my TT-3200 with enigma2. Hope the following helps/makes sense.

using latest/greatest https://github.com/n...9/openpliPC.git
compiles/runs/does all configs
when I try to do any type of scan on a known good transponder I get OURSTATE: failed, fatal

NIM Socket 0:
Type: DVB-S2
Name: Budget-CI (I've tried saa7146 TT-3200)
Has_Outputs: no
Frontend_Device: 0

I am not doing step 9 below from old scripts as I don't think the current kernel needs dvbsoftwareca/s2-liplianin


9.) Build saa7146 kernel module:(cougar-enigma içinde)
cd dvbsoftwareca
make # You must have installed dvb-core (for example from s2-liplianin).
insmod dvbsoftwareca.ko # It will create ca0 and ca1 devices for adapter0

Hi,

Check with lsmod which of these modules you have loaded and eventually load missing ones.

insmod saa7146.ko
insmod dvb-core.ko
insmod stb0899.ko
insmod stb6100.ko
insmod lnbp21.ko
insmod ttpci-eeprom.ko

You can check result using dmesg.

Bye
attaros

P.S. i have a TT-3200 but am in holiday now for 3 weeks, i do not remeber more.....

Edited by attaros, 21 December 2011 - 10:42.

[bl4ck]

@nobody
New patch xine-lib_vaapi does not work?, I have the Intel HD i3.

[freesky]

Hi,

I wanted to know if this software works only with VTUNER software or a real DVB-S2 card as TT-S3200 would work too ?
(i am not a Ubuntu user......nor expert..).

Thanks
attaros

Im successfully using with TBS QBOX S2 card - works very well.

@nobody @Seal

Hi! I need help on my TT-3200 with enigma2. Hope the following helps/makes sense.

using latest/greatest https://github.com/n...9/openpliPC.git
compiles/runs/does all configs
when I try to do any type of scan on a known good transponder I get OURSTATE: failed, fatal

NIM Socket 0:
Type: DVB-S2
Name: Budget-CI (I've tried saa7146 TT-3200)
Has_Outputs: no
Frontend_Device: 0

I am not doing step 9 below from old scripts as I don't think the current kernel needs dvbsoftwareca/s2-liplianin


9.) Build saa7146 kernel module:(cougar-enigma içinde)
cd dvbsoftwareca
make # You must have installed dvb-core (for example from s2-liplianin).
insmod dvbsoftwareca.ko # It will create ca0 and ca1 devices for adapter0

Hi,

Check with lsmod which of these modules you have loaded and eventually load missing ones.

insmod saa7146.ko
insmod dvb-core.ko
insmod stb0899.ko
insmod stb6100.ko
insmod lnbp21.ko
insmod ttpci-eeprom.ko

You can check result using dmesg.

Bye
attaros

P.S. i have a TT-3200 but am in holiday now for 3 weeks, i do not remeber more.....

Thanks to nobody9 and attaros, lnbp21 & ttpci-eeprom were not loaded. The SD side works now. On to AMC 18 which is 8psk S2 H264.

[Seal]

nobody9:

any ideas what is difference between xine-lib.old and xine-lib? what i new some channels (i got you sample) dont works? It is possible to fix it in xine-lib?

[nobody9]

@seal,
have you tried the last xine-lib version from 18.12.2011, their are many thinks fixed.
After compile xine-lib recompile enigma2 too.

nobody9:

any ideas what is difference between xine-lib.old and xine-lib? what i new some channels (i got you sample) dont works? It is possible to fix it in xine-lib?

[Seal]

@seal,
have you tried the last xine-lib version from 18.12.2011, their are many thinks fixed.
After compile xine-lib recompile enigma2 too.

yes, tried today... not working

Other question - it is possible to run OpenWebIF plugin on PC Enigma? I copied plugin but i got error in loading... i copied plugin to the folder /usr/local/e2/lib/enigma2/python/Plugins/Extensios as OpenWEBIF

[nobody9]

it´s possible, you must install python-cheetah:
sudo apt-get install python-cheetah

@seal,
have you tried the last xine-lib version from 18.12.2011, their are many thinks fixed.
After compile xine-lib recompile enigma2 too.

yes, tried today... not working

Other question - it is possible to run OpenWebIF plugin on PC Enigma? I copied plugin but i got error in loading... i copied plugin to the folder /usr/local/e2/lib/enigma2/python/Plugins/Extensios as OpenWEBIF

[nobody9]

yes, tried today... not working

i have analyzed the sample.ts file from you. also VLC-Player don´t play the stream.
Stream Information

7 Video Streams H264

ts debug:   * es pid=801 type=27 fcc=h264
ts debug:   * es pid=901 type=27 fcc=h264
ts debug:   * es pid=4097 type=27 fcc=h264
ts debug:   * es pid=301 type=27 fcc=h264
ts debug:   * es pid=501 type=27 fcc=h264
ts debug:   * es pid=401 type=27 fcc=h264
ts debug:   * es pid=601 type=27 fcc=h264

5 Audio stream AC3

ts debug:   * es pid=910 type=6 fcc=a52
ts debug:   * es pid=911 type=6 fcc=a52
ts debug:   * es pid=4113 type=6 fcc=a52
ts debug:   * es pid=411 type=6 fcc=a52
ts debug:   * es pid=412 type=6 fcc=a52

7 Audio mpeg

ts debug:   * es pid=811 type=4 fcc=mpga
ts debug:   * es pid=812 type=4 fcc=mpga
ts debug:   * es pid=4112 type=4 fcc=mpga
ts debug:   * es pid=311 type=4 fcc=mpga
ts debug:   * es pid=514 type=4 fcc=mpga
ts debug:   * es pid=534 type=4 fcc=mpga
ts debug:   * es pid=614 type=4 fcc=mpga

2 Teletext

ts debug:   * es pid=3128 type=6 fcc=telx
ts debug:   * es pid=264 type=6 fcc=telx

1 subtitle

ts debug:   * es pid=7721 type=6 fcc=dvbs

i this normal or is the file you give me corrupted

[shumifan50]

For those who are interested, the attached is vtunerc(i686) and vtunerd.mipsel15(for DM7025) for DM7025 with latest Openpli 2 image from nightly builds.
Note it is all about versions

Attached Files

•  DM7025-vtuner.tar   110KB   26 downloads

[Seal]

with today compilation i have many in log when whating any channel:

poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)

[shumifan50]

libdvb++* is not available from git

[nobody9]

it´s working

git clone git://git.opendreambox.org/git/obi/libdvbsi++.git
Cloning into libdvbsi++...
remote: Counting objects: 1658, done.
remote: Compressing objects: 100% (512/512), done.
remote: Total 1658 (delta 1292), reused 1450 (delta 1128)
Receiving objects: 100% (1658/1658), 387.86 KiB, done.
Resolving deltas: 100% (1292/1292), done.

libdvb++* is not available from git

[shumifan50]

it turns out the problem is that I upgraded from Ubuntu 10.4 -> 10.10 -> 11.04 -> 11.10 and somewhere in the process debhelper package did not get updated to a version > 7. Manually updating the package solved the problem.

libdvb++* is not available from git

[jenus]

I have a issue with the dvbsoftwareca, for some reason it doesen't decode channels. I see it connecting to the server:


23:54:39.461 CCcam: cam[0] ecm even ok caid:0x963 id:0x0 pid:0x501 Unknown
23:54:47.328 CCcam: remote ecm -> 172.16.0.214:12000 0x963(0x000)
23:54:47.564 CCcam: remote ecm <- 172.16.0.214:12000 ok

And on enigma:


adapter0/demux0 idx 0: change to even key
adapter0/demux0 idx 0: even key not ready (500 ms)
adapter0/demux0 idx 0: not active. wait skipped


My adapter:


ls /dev/dvb/adapter0/
ca0 demux0 dvr0 frontend0 net0

Any clue what is wrong? The ECM doesen't seem to reach enigma for some reason. Diden't have any problems builing enigma and sd/hd FTA channels work fine.

[nobody9]

No support for this, to respect the rules of this forum.

I have a issue with the dvbsoftwareca

[Pa0l0ne]

Hi,

I wanted to know if this software works only with VTUNER software or a real DVB-S2 card as TT-S3200 would work too ?
(i am not a Ubuntu user......nor expert..).

Thanks
attaros

Im successfully using with TBS QBOX S2 card - works very well.

@nobody @Seal

Hi! I need help on my TT-3200 with enigma2. Hope the following helps/makes sense.

using latest/greatest https://github.com/n...9/openpliPC.git
compiles/runs/does all configs
when I try to do any type of scan on a known good transponder I get OURSTATE: failed, fatal

NIM Socket 0:
Type: DVB-S2
Name: Budget-CI (I've tried saa7146 TT-3200)
Has_Outputs: no
Frontend_Device: 0

I am not doing step 9 below from old scripts as I don't think the current kernel needs dvbsoftwareca/s2-liplianin


9.) Build saa7146 kernel module:(cougar-enigma içinde)
cd dvbsoftwareca
make # You must have installed dvb-core (for example from s2-liplianin).
insmod dvbsoftwareca.ko # It will create ca0 and ca1 devices for adapter0

Hi,

Check with lsmod which of these modules you have loaded and eventually load missing ones.

insmod saa7146.ko
insmod dvb-core.ko
insmod stb0899.ko
insmod stb6100.ko
insmod lnbp21.ko
insmod ttpci-eeprom.ko

You can check result using dmesg.

Bye
attaros

P.S. i have a TT-3200 but am in holiday now for 3 weeks, i do not remeber more.....

Thanks to nobody9 and attaros, lnbp21 & ttpci-eeprom were not loaded. The SD side works now. On to AMC 18 which is 8psk S2 H264.

Hello! i have TT-3200 too, but i have not idea how to load the kernel object listed in quoted message, and how exactly edit the NIM Socket with my Technotrend.

Is it correct?

NIM Socket 0:
Type: DVB-S2
Name: Budget-CI
Has_Outputs: no
Frontend_Device: 0

Please, i need very noobles help! (Compile libs and OpenPLI with my Ubuntu 11.10 went fine!)

[Seal]

Hello! i have TT-3200 too, but i have not idea how to load the kernel object listed in quoted message, and how exactly edit the NIM Socket with my Technotrend.

Is it correct?

NIM Socket 0:
Type: DVB-S2
Name: Budget-CI
Has_Outputs: no
Frontend_Device: 0

Please, i need very noobles help! (Compile libs and OpenPLI with my Ubuntu 11.10 went fine!)

Hi,

send us your dmesg output and do you have files in /dev/dvb/ ?