2062 replies to this topic

[bibic]

Thanks 1455. I changed. But now I want to receive some tv channels. My tbs card is ok; work with tvheadend and kaffeine. On enigma I not have any tunner. And on display I dont see meniu like enigma2.

 

Edited by bibic, 24 February 2017 - 12:54.

[arsi]

vaapi OSD freeze on stream stop/no signal:

 

http://server.arsi.s...ream_stop.patch

 

Tested on libxine 1.2.8 [NUC 5I5RYK]

 

Arsi

[arsi]

Unfortunately, in the xine-Lib 1.2.6 and 1.2.8 doesn't work timeshift. Press the yellow button and you will see.

From Python  is not called method _wrap_iTimeshiftServicePtr_startTimeshift [enigma_python.cpp] Its entry point for timeshift..

I'm not an python expert, but I'll try to look at it ..

[1455]

arsi, now I can't verify, but I don't understand what is the "BCM accel interface"?
That's what I see now (Тuxtxt):

root@Sat-flash:/usr/src/E2PC/TEST_TUXTXT/enigma2pc# ./e2bin
PYTHONPATH: /usr/local/e2/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
BCM accel interface not available - Неприменимый к данному устройству ioctl
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (9) gLCDDC
5120k video mem
 - double buffering available!
LCD FBIO_SET_MANUAL_BLIT: Неприменимый к данному устройству ioctl

If it works, then I will upload later. There is one trick: need to create a symbolic link /dev/fb1

About xine... Maybe make diff 1.2.5 -> 1.2.6 and return part of the code? Change version xine will not give us nothing. IMHO, we need to change the communication with xine.

 

bibic, look to the file "nim_sockets".

Edited by 1455, 25 February 2017 - 13:58.

[arsi]

arsi, now I can't verify, but I don't understand what is the "BCM accel interface"?
That's what I see now (Тuxtxt):

root@Sat-flash:/usr/src/E2PC/TEST_TUXTXT/enigma2pc# ./e2bin
PYTHONPATH: /usr/local/e2/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
BCM accel interface not available - Неприменимый к данному устройству ioctl
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (9) gLCDDC
5120k video mem
 - double buffering available!
LCD FBIO_SET_MANUAL_BLIT: Неприменимый к данному устройству ioctl

If it works, then I will upload later. There is one trick: need to create a symbolic link /dev/fb1

About xine... Maybe make diff 1.2.5 -> 1.2.6 and return part of the code? Change version xine will not give us nothing. IMHO, we need to change the communication with xine.

 

bibic, look to the file "nim_sockets".

I think Dreambox framebuffer has a different structure that videocard framebufer on pc..

The easy way is to rewrite framebuffer code to generate PNG and view it as here https://github.com/o...ter/orfteletext or use AleVT as backend..

 

My patch should  work  on 1.2.6, basically, it's one line of code.

I will use 1.2.8, better MPEG2 results and after that patch, channel switching is faster, same as on dreambox..

It remains only chopping sound.

Now I'm working on a functional version of openATV metrixHD skin..

[arsi]

vaapi OSD freeze on stream stop/no signal:

Cosmetic changes - All in one lock

http://server.arsi.s...m_stop_v2.patch

[Shadowman94]

1455, maybe can u make an git repo for whole code?

[arsi]

1455, maybe can u make an git repo for whole code?

You can.. I'm on github arsi-apli

 

Btw: metrixHD + Enhanced Movie Center is already working, now only produce patches..

 

Strange is that it does not work without I had  delete skin_default.xml, channelselector design has not changed..

[arsi]

And one more thing, in my opinion it would be reasonable to create bacport patch from latest openPLi version to e2PC, as I made libxine patch..

Next weekend I can try it..

[bibic]

Today I try enigma2pc from Raider05 git ( https://github.com/Raider05/enigma2pc )

When start enigma2 I have this error;

 

test@desktop:~/Downloads$ sudo /usr/local/e2/bin/enigma2.sh
PYTHONPATH: /usr/local/e2/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
BCM accel interface not available - Inappropriate ioctl for device
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (9) gLCDDC
lcd buffer 0x11aa540 8448 bytes, stride 132
+ (9) gXlibDC
Display resolution 1680 1050
XINE-LIB version: 1.2.6
configfile  /usr/local/e2/share/enigma2/xine.conf
Available post plugins:  fftgraph mosaico expand fill invert eq denoise3d boxblur eq2 unsharp pp noise upmix upmix_mono stretch volnorm tvtime switch goom vdr vdr_video vdr_audio enigma enigma_video enigma_audio oscope fftscope
use vo_driver: auto
use ao_driver: alsa
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
vo_vdpau: Can't create vdp device : No vdpau implementation.
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
vo_vdpau: Can't create vdp device : No vdpau implementation.
video_out_dxr3: Failed to open control device /dev/em8300-0 (No such file or directory)
video_out_dxr3: Failed to open control device /dev/em8300-0 (No such file or directory)
video_out_opengl: Testing for hardware accelerated direct rendering visual
video_out_opengl: setup of '2D_Tex_Fragprog'
video_out_opengl: extension GL_EXT_bgra: OK
video_out_opengl: extension GL_EXT_texture_object: OK
video_out_opengl: extension GL_ARB_fragment_program: OK
video_out_opengl: extension GL_ARB_pixel_buffer_object: OK
video_out_open_opengl_fragprog: b 0 c 128 s 128 [RGB]
audio_alsa_out : supported modes are 8bit 16bit 24bit 32bit mono stereo (4-channel not enabled in xine config) (4.1-channel not enabled in xine config) (5-channel not enabled in xine config) (5.1-channel not enabled in xine config) (a/52 and DTS pass-through not enabled in xine config)
xine: found input plugin  : file input plugin
ebml: invalid EBML ID size (0x0) at position 1
ebml: Invalid EBML length size (0x0) at position 2
ebml: invalid master element
demux_dts: unsupported DTS stream type, or not a DTS stream
demux_dts: unsupported DTS stream type, or not a DTS stream
xine: found demuxer plugin: Elementary MPEG stream demux plugin
video_out_opengl: setup of '2D_Tex_Fragprog'
video_out_open_opengl_fragprog: b 0 c 128 s 128 [RGB]
static post plugins (from command line): enigma_video;enigma_audio;upmix_mono
    loaded plugins (type 1.0): enigma_video
    loaded plugins (type 2.0): enigma_audio upmix_mono
Enable re-wiring post plugins
        wiring enigma_video[out] -> [in]video_out
        wiring    stream
[out] -> [in]enigma_video        wiring upmix_mono[out] -> [in]audio_out
        wiring enigma_audio[out] -> [in]upmix_mono
        wiring     stream[out] -> [in]enigma_audiosetResolution 720 576
I have XINE event ---  1
XINE_EVENT_UI_PLAYBACK_FINISHED
video_out_opengl: setup of '2D_Tex_Fragprog'
video_out_open_opengl_fragprog: b 0 c 128 s 128 [ITU-R 470 BG / SDTV]
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (20) misc options
+ (20) RC Input layer
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) DVB-CI UI
+ (21) Lirc RC Driver
Lirc: Connect to /dev/lircd error !!!
+ (21) Xlib RC Driver
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (34) caConnector
Cannot resolve family name of generic netlink socket
+ (35) CA handler
+ (35) CI Slots
scanning for common interfaces..
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 0 common interface slots
+ (36) Stream server
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVB
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryDVD
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 0 channels/transponders and 0 services
scanning for frontends..
opening frontend 0
XNextEvent 21
XNextEvent 22
XNextEvent 22
XNextEvent 19
XNextEvent 12
XNextEvent 22
XNextEvent 12
XNextEvent 12
XNextEvent 17
XNextEvent 22
close frontend 0
boxtype detection via /usr/local/e2/etc/stb/info not possible... use fallback via demux count!

found 1 adapter, 1 frontends(1 sim) and 2 demux, boxtype 0
Use valid Linux Time (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
[ePNG] couldn't open /usr/local/e2/share/enigma2/skin_default/spinner/wait8.png
found 7 spinner!

adapter0/demux0: reset stateadapter0/demux1: reset stateexecuting main
setIoPrio best-effort level 3 ok
/usr/local/e2/etc/stb/frontend/0/lnb_sense is 0

Scanning hardware info
Detected: e2pc (e2pc)
Reading satellites.xml
MATRIX
LNB
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr VTUNER, need rotorworkaround No, enabled Yes, DVB-S2 Yes
Traceback (most recent call last):
  File "/usr/local/e2/lib/enigma2/python/mytest.py", line 18, in <module>
    from Screens import InfoBar
  File "/usr/local/e2/lib/enigma2/python/Screens/InfoBar.py", line 5, in <module>
    import Screens.MovieSelection
  File "/usr/local/e2/lib/enigma2/python/Screens/MovieSelection.py", line 16, in <module>
    from Components.UsageConfig import preferredTimerPath
  File "/usr/local/e2/lib/enigma2/python/Components/UsageConfig.py", line 6, in <module>
    from Components.NimManager import nimmanager
  File "/usr/local/e2/lib/enigma2/python/Components/NimManager.py", line 1608, in <module>
    nimmanager = NimManager()
  File "/usr/local/e2/lib/enigma2/python/Components/NimManager.py", line 836, in __init__
    InitNimManager(self)    #init config stuff
  File "/usr/local/e2/lib/enigma2/python/Components/NimManager.py", line 1542, in InitNimManager
    nimmgr.sec = SecConfigure(nimmgr)
  File "/usr/local/e2/lib/enigma2/python/Components/NimManager.py", line 488, in __init__
    self.update()
  File "/usr/local/e2/lib/enigma2/python/Components/NimManager.py", line 157, in update
    types.remove("DVB-S")
ValueError: list.remove(x): x not in list
---- saving lame channel db
FLUSH
saved 0 channels and 0 services!
release cached channel (timer timeout)
set RTC to previous valid time
- (41) eServiceFactoryDVB
- (41) eServiceFactoryFS
- (41) eServiceFactoryMP3
- (41) eServiceFactoryM2TS
- (41) eServiceFactoryDVD
- (40) eServiceCenter
clear instance
- (36) Stream server
- (35) CA handler
- (35) CI Slots
- (34) caConnector
- (30) eActionMap
- (22) Hdmi CEC driver
- (21) Lirc RC Driver
send signal to non running thread
- (21) Xlib RC Driver
- (20) AVSwitch Driver
- (20) misc options
- (20) RC Input layer
- (20) UHF Modulator
- (20) DVB-CI UI
- (15) eWindowStyleManager
- (10) gRC
waiting for gRC thread shutdown
gRC thread has finished
- (9) Font Render Class
- (9) gLCDDC
- (9) gXlibDC
thread joined 0
Unloading post plugins
I have XINE event ---  7
xine_event_handler(): event->type: 7
-------
Segmentation fault (core dumped)
 

Any ideea?

 

 

My nim_sockets

 

cat /usr/local/e2/etc/tuxbox/nim_sockets
NIM Socket 0:
        Type: DVB-S2
        Name: TBS 8920 DVB-S/S2
        Has_Outputs: no
        Frontend_Device: 0
 

Thanks

Edited by bibic, 26 February 2017 - 14:06.

[1455]

Please test chopping sound and report.

 

I don't understand why some SD-channels have segmentation error on exit and stupid write stoped crash log. If on the same channel run through gdb, it is impossible to catch the error. She is hides.

[betacentauri]

Try valgrind.

[1455]

And finally, if you have ability, check the most difficult provider "Tricolor TV". The problem wasn't in the xine-lib.

[arsi]

And finally, if you have ability, check the most difficult provider "Tricolor TV". The problem wasn't in the xine-lib.

Excellent! Sound works without problems!!

[1455]

OK. The fact that the ratio of buffers number and buffer size in the ring buffer is crucial to synchronize. In addition, we don't know encoder's settings what used providers. They may be wrong.

[bibic]

@1455 - from few days I have an error when I try to run INSTALL_ALL.sh

 

........

Selecting previously unselected package libxine-e2pc.
(Reading database ... 265700 files and directories currently installed.)
Preparing to unpack .../libxine-e2pc_1.2.5-1_i386.deb ...
Unpacking libxine-e2pc (1.2.5-1) ...
dpkg: error processing archive /usr/src/enigma2pc/xine-lib-1.2.5/libxine-e2pc_1.2.5-1_i386.deb (--install):
 trying to overwrite '/usr/bin/xine-config', which is also in package libxine2-dev 1.2.6-1build1
dpkg-deb: error: subprocess paste was killed by signal (Broken pipe)
Errors were encountered while processing:
 /usr/src/enigma2pc/xine-lib-1.2.5/libxine-e2pc_1.2.5-1_i386.deb
/var/tmp/tmp.QrHDYwL5wf/dpkginstall.log (END)
 

And nothing.

[bibic]

When I try to install manual libxine-e2pc_1.2.5-1_i386.deb with software ubuntu center......

....

Reading database ... 95% (Reading database ... 100% (Reading database ... 265700 files and directories currently installed.)
Preparing to unpack .../libxine-e2pc_1.2.5-1_i386.deb ...
Unpacking libxine-e2pc (1.2.5-1) ...
dpkg: error processing archive /usr/src/enigma2pc/xine-lib-1.2.5/libxine-e2pc_1.2.5-1_i386.deb (--install):
 trying to overwrite '/usr/bin/xine-config', which is also in package libxine2-dev 1.2.6-1build1
dpkg-deb (subprocess): decompressing archive member: lzma write error: Broken pipe
dpkg-deb: error: subprocess <decompress> returned error exit status 2
dpkg-deb (subprocess): cannot copy archive member from '/usr/src/enigma2pc/xine-lib-1.2.5/libxine-e2pc_1.2.5-1_i386.deb' to decompressor pipe: failed to write (Broken pipe)
Errors were encountered while processing:
 /usr/src/enigma2pc/xine-lib-1.2.5/libxine-e2pc_1.2.5-1_i386.deb
 

[bibic]

Where find xine-lib-1.2_1.2.0_e2pc-0.tar.gz or libxine-dev_1.2.0_e2pc-0_i386.deb ? Old link is not available - http://www.speedysha...e2pc-0_i386.deb

 

Thanks.

[arsi]

Where find xine-lib-1.2_1.2.0_e2pc-0.tar.gz or libxine-dev_1.2.0_e2pc-0_i386.deb ? Old link is not available - http://www.speedysha...e2pc-0_i386.deb

 

Thanks.

 

download Enigma2pc-mod-1455

 

goto xine-lib-1.2.5

autogen.sh

./configure --disable-xinerama --prefix=/usr --enable-a52dec=internal --enable-dts=internal

make

sudo make install

[bibic]

Thanks.

 

When run enigma2 I have the same error;

 

.......

X11OSD: MMX OSD scaling active
load_plugins: failed to load audio output plugin <alsa>
xine: found input plugin  : file input plugin
failed to read 8 bytes at pos 84222
xine: found demuxer plugin: AVI/RIFF demux plugin
ffmpeg_video_dec: direct rendering enabled
[mjpeg @ 0xafe01b40] Changeing bps to 8
ffmpeg_video_dec: color matrix #5 [ITU-R 470 BG / SDTV]
demux_avi: video and audio streams are ended
video_out_xshm: b 0 c 128 s 128 [ITU-R 470 BG / SDTV]
static post plugins (from command line): enigma_video;enigma_audio;upmix_mono
    loaded plugins (type 1.0): enigma_video
Enable re-wiring post plugins
        wiring enigma_video[out] -> [in]video_out
        wiring    stream
[out] -> [in]enigma_videosetResolution 720 576
I have XINE event ---  1
XINE_EVENT_UI_PLAYBACK_FINISHED
/usr/local/e2/bin/enigma2: symbol lookup error: /usr/local/e2/bin/enigma2: undefined symbol: xine_osd_show_scaled