2062 replies to this topic

[Raider05]

I use wicardd (have't official card) and in the section [reader] add the option
"ecm_delay = 1000"

No problems when look coded channels and record contents
May be someone add to "metronom" support instead "nbc" and not need do then delay?

[eros23]

I have successfully installed the version of enigma2 on my "Ubuntu 12.04.3 LTE."

Everything is working correctly but I can not do with oscam.

 

the error that leads me to this is below.

I say already now that I was unable to install dvbsoftwareca!

 

My Kernel is: 3.8.0-29-generic

 

I have attached my hardware

 

 

 

ERROR REPORT:

 

0012:  4e 0f d5 0d 00 00

mask:  ff ff ff 3f 00 00

mode:  00 00 00 3e 00 00

adapter0/demux0 idx 0: change to even key

adapter0/demux0 idx 0: even key not ready (500 ms)

adapter0/demux0 idx 0: not active. wait skipped

Attached Files

•  lshw.log   18.44KB   10 downloads
•  Schermata del 2013-10-08 21:09:56.png   471.54KB   93 downloads

[Raider05]

I say already now that I was unable to install dvbsoftwareca!

Can't do compile  you the module dvbsoftwareca?

Without the module oscam or any emu will not work.

install libnl2 and libnl2-dev, other libnl remove from your system,

compile the module and in thw console:

 

modprobe dvbsoftwareca

 

Create symlinks for your demux0 and dvr0:

 

ln -s /dev/dvb/adapter0/demux0 /dev/dvb/adapter0/demux1

ln -s /dev/dvb/adapter0/dvr0 /dev/adapter0/dvb/dvr1

[eros23]

I say already now that I was unable to install dvbsoftwareca!

Can't do compile  you the module dvbsoftwareca?

Without the module oscam or any emu will not work.

install libnl2 and libnl2-dev, other libnl remove from your system,

compile the module and in thw console:

 

modprobe dvbsoftwareca

 

Create symlinks for your demux0 and dvr0:

 

ln -s /dev/dvb/adapter0/demux0 /dev/dvb/adapter0/demux1

ln -s /dev/dvb/adapter0/dvr0 /dev/adapter0/dvb/dvr1

hello

I tried to install your version that I have found in git.
While compiling the libraries xine-lib I get an error. I'll paste my log

Attached Files

•  build_log.log   251.31KB   15 downloads

[Raider05]

What use the package "libavcodec-dev"???

[eriche]

Hello

 

I hope you can help me.

When compiling OpenPLIPC with the methode from nobody9 I get under LUbuntu and Ubuntu 13.10 the following error

In file included from osd.c:30:0:
/usr/include/zlib.h:1511:24: note: expected 'gzFile' but argument is of type 'struct gzFile_s **'
 ZEXTERN int ZEXPORT    gzclose OF((gzFile file));
                        ^
osd.c: In function 'osd_free_object':
osd.c:1697:50: warning: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to dereference it? [-Wsizeof-pointer-memaccess]
     memset( this->event.object.overlay, 0, sizeof(this->event.object.overlay) );
                                                  ^
osd.c: In function '_x_osd_renderer_init':
osd.c:1898:46: warning: passing argument 4 of 'this->stream->xine->config->register_enum' from incompatible pointer type [enabled by default]
                                              10, update_text_palette, this);
                                              ^
osd.c:1898:46: note: expected 'char **' but argument is of type 'const char * const*'
make[2]: *** [libxine_la-osd.lo] Error 1
make[2]: Leaving directory `/home/erich/Public/OpenPLI/openpliPC/xine-lib/src/xine-engine'
make[1]: *** [../src/xine-engine/libxine.la] Error 2
make[1]: Leaving directory `/home/erich/Public/OpenPLI/openpliPC/xine-lib/misc'
make: *** [install-recursive] Error 1

An error occured while building xine-lib
erich@ubuntu:~/Public/OpenPLI/openpliPC$
 

I am not a pro in Linux but tryed my best and want to succeed to be finally able to compile a plugin

 

GreeT`s Erich

 

[radxnl]

try http://openpli.org/f...ndpost&p=375225

[eriche]

Hello radxnl

 

Can you explain me short what the patch scripts are doing?

Would like to understand it

why arnt the patches included in the scripts - I guess all people will have the same issus I had.

 

But after extracting  xinepatch and eptrlistpatch I have now the following error

 

 

tstools.cpp:625:106: warning: format ‘%lld’ expects argument of type ‘long long int’, but argument 4 has type ‘off_t {aka long int}’ [-Wformat=]
tstools.cpp:625:106: warning: format ‘%lld’ expects argument of type ‘long long int’, but argument 5 has type ‘off_t {aka long int}’ [-Wformat=]
  CXX      volume.o
  CXX      streamserver.o
  CXX      ca_connector.o
In file included from ca_connector.cpp:1:0:
../../lib/dvb/ca_connector.h:6:29: fatal error: netlink/netlink.h: No such file or directory
 #include <netlink/netlink.h>
                             ^
compilation terminated.
make[3]: *** [ca_connector.o] Error 1
make[3]: Leaving directory `/home/erich/Public/OpenPLI/openpliPC/enigma2/lib/dvb'
make[2]: *** [install-recursive] Error 1
make[2]: Leaving directory `/home/erich/Public/OpenPLI/openpliPC/enigma2/lib/dvb'
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory `/home/erich/Public/OpenPLI/openpliPC/enigma2/lib'
make: *** [install-recursive] Error 1

An error occured while building OpenPliPC
erich@ubuntu:~/Public/OpenPLI/openpliPC$
 

Please guide me what to do next

 

thanks Erich

 

[eriche]

maybe this output helps you to figure out whats wrong with my system

erich@ubuntu:~/Public/OpenPLI/openpliPC$ dpkg --get-selections  | grep libnl
libnl-3-200:amd64                install
libnl-genl-3-200:amd64                install
libnl-route-3-200:amd64                install
 

GreeTs Erich

 

[radxnl]

install libnl2 and libnl2-dev and try again

[eriche]

I don`t know how to install it

The Ubuntu 13.10 package Manager doesn`t give me the Chance to choose the libnl2 - it only gives me libnl3

 

Do I need extra sources - or how can I install it?

 

GreeT`s eRich

[radxnl]

sudo apt-get install libnl2 libnl2-dev

[eriche]

like I told you - the package is not available

I read in the internet, that it may be a problem of the include path that the compiler doesnt find the lib,...

erich@ubuntu:~/Public/OpenPLI/openpliPC$ sudo apt-get install libnl2 libnl2-dev
[sudo] password for erich:
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Package libnl2-dev is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Unable to locate package libnl2
E: Package 'libnl2-dev' has no installation candidate
erich@ubuntu:~/Public/OpenPLI/openpliPC$
 

Some people are speaking about "pkg-config" - but I could not use it for the libnl3.

 

How should I set the path variables that the compiler finds the libnl3 - or how do I install the libnl2.

Do you know a source I get it from?

 

GreeTs Erich

 

Edited by eriche, 31 October 2013 - 08:17.

[radxnl]

Ok install libnl3-dev than

You need one of the libnl....-dev for the missing header

[eriche]

Its not easy to reach the goal

I already installed yesterday the "dev" lib - but still had the same problems.

erich@ubuntu:~/Public/OpenPLI/openpliPC$ dpkg --get-selections  | grep libnl
libnl-3-200:amd64                install
libnl-3-dev                    install
libnl-genl-3-200:amd64                install
libnl-route-3-200:amd64                install
erich@ubuntu:~/Public/OpenPLI/openpliPC$
 

Is there a way to link the missing header file to a place where the compiler is looking for it?

 

Greets Erich

[eriche]

maybe this helps you telling me what to do

http://stackoverflow...includes-broken

 

Maybe I have to edit the build scripts to tell the compiler the path to the lib?

 

I also read

 

The problem is that in one include file from the libnl3 headers, it 
tries to include another header and simply cannot find it (because the 
libnl3 path prefix is missing).
 

Many people seem to have problems - but I didnt read a solution

Edited by eriche, 31 October 2013 - 09:38.

[hemant_5400z]

Hi Friends,

 

Trying this project but getting problems:

 

In file included from ca_connector.cpp:1:

../../lib/dvb/ca_connector.h:6:29: error: netlink/netlink.h: No such file or directory

../../lib/dvb/ca_connector.h:7:31: error: netlink/genl/genl.h: No such file or directory

../../lib/dvb/ca_connector.h:8:31: error: netlink/genl/ctrl.h: No such file or directory

In file included from ca_connector.cpp:1:

 

 

is there still any develment

 

also do i need the desktop version or can i stick with LTS

 

i currently run 10.4 LTS.

 

Hemant

[eriche]

the problem is, that the documentation is not OK
Everybody who starts from scratch will have this problems under Ubuntu.
When you read the last page (43) you will see that I had the same problem.

 

The user RADXNL posted 2 patches to fix this problem - but he never explained why this stuff doesn`t work out of the box.

So I don`t know if he wants to keep his knowledge for himself or doesn`t know too what this scripts are doing?

 

I still stuck unter Ubuntu 13 at the "Package libnl2-dev is not available" problem.

Hopefully you come further

Greets Erich

[betacentauri]

Hi together,

first problem is, that nobody9 (the guy who did the first development and opened the git) has disappeared. Only a few people have access to the used git. I'm one of them. That's the next problem. Sorry, I have currently no time to test and commit new things (perhaps in the future...). And I'm still working with Ubuntu 12.04.
So if somebody posts here a patch or sends it to me, I'll commit it in the git.

Regards,
Betacentauri

[msg10]

Maybe the answer to my question is still posed on one of the sites, but, how can I just install ipk-files. Just copying installed plugins from box into right directory would do, not tried, but think so. Otherwise, now you can just update the title of the thread to 13.04. Working at me.