Jump to content


Photo

Openpli update troubles topic

Algemeen

  • Please log in to reply
3101 replies to this topic

Re: Openpli update troubles topic #381 amigo

  • Senior Member
  • 1,315 posts

+13
Neutral

Posted 25 January 2011 - 12:52

Ik draai hier Magic-EHD en heb geen probleem ondervonden.


Jij hebt toch geen DM8000?

VU+ Ultimo 4K - 78 Triax met triple Quad 


Re: Openpli update troubles topic #382 SatScan

  • Senior Member
  • 68 posts

-3
Neutral

Posted 25 January 2011 - 13:10


Ik draai hier Magic-EHD en heb geen probleem ondervonden.



Jij hebt toch geen DM8000?



Ik heb een vu+ duo, jij hebt met de dm8000 hetzelfde probleem.

Scherm blijft zwart, ik heb verder geen melding.
Als ik een log kan vinden mbt probleem zal ik die posten, helaas moet ik zo gaan werken... dus een werkende box is een must anders wordt het overnachten in het tuinhuisje...

Grtz,

Re: Openpli update troubles topic #383 SatScan

  • Senior Member
  • 68 posts

-3
Neutral

Posted 25 January 2011 - 13:27

Hoi,

Helaas geen log kunnen vinden.

Na USB flash (versie 25/01/11) alleen settinglijst van henk en Magic EHD skin erin, reboot en de box blijft zwart...

Drukken toetsen AB geen resultaat.
Als er anders manier is om erachter te komen wat het probleem kan zijn laat het me weten dan doe ik dat morgenvroeg.

VU+ Duo

Grtz,

Re: Openpli update troubles topic #384 VU+NL

  • Senior Member
  • 6,424 posts

+12
Neutral

Posted 25 January 2011 - 13:38

Het koste even moeite om een crashlog te forceren, maar ik heb de schurk gevonden:
In Magic-EHD staat in de skin.xml een fout: op regel 7432 staat "yellow"; dat moet worden vervangen door "foregroundColor="yellow".

Sorry .......
VU+ DUO/UNO/Digiality 85cm multifocus-4 X twin-Inverto-LNB's/Triax 88 USALS/Logitech Harmony 300, 555, 600, 900 en 1100

Re: Openpli update troubles topic #385 VU+NL

  • Senior Member
  • 6,424 posts

+12
Neutral

Posted 25 January 2011 - 16:37

Ik had er zelf geen last van, omdat ik direct na de update, nog voordat de box herstart werd, een verse skin-xml erin had gezet. Die staat overigens morgen (als alles goed gaat) online.
En hier ist'ie ook (dus Magic-EHD):

Attached Files


VU+ DUO/UNO/Digiality 85cm multifocus-4 X twin-Inverto-LNB's/Triax 88 USALS/Logitech Harmony 300, 555, 600, 900 en 1100

Re: Openpli update troubles topic #386 littlesat

  • PLi® Core member
  • 57,084 posts

+698
Excellent

Posted 25 January 2011 - 16:39

Misschien even een stoplicht op geel zetten?

Re: Openpli update troubles topic #387 ni_hao

  • Senior Member
  • 846 posts

+5
Neutral

Posted 25 January 2011 - 17:35

Op dm8000 hier geen enkel probleem; image is verder goed zoals VU+ NL al aangaf is het dus een skin probleem.

Re: Openpli update troubles topic #388 VU+NL

  • Senior Member
  • 6,424 posts

+12
Neutral

Posted 25 January 2011 - 17:50

.. image is verder goed zoals VU+ NL al aangaf is het dus een skin probleem.

Wisten we toch, inclusief de oplossing......
VU+ DUO/UNO/Digiality 85cm multifocus-4 X twin-Inverto-LNB's/Triax 88 USALS/Logitech Harmony 300, 555, 600, 900 en 1100

Re: Openpli update troubles topic #389 SatScan

  • Senior Member
  • 68 posts

-3
Neutral

Posted 26 January 2011 - 01:44

Hoi,

Je bijlage in mapje gezet en yep het werkt weer!

Tnx topper!

Grtz,

Ik had er zelf geen last van, omdat ik direct na de update, nog voordat de box herstart werd, een verse skin-xml erin had gezet. Die staat overigens morgen (als alles goed gaat) online.
En hier ist'ie ook (dus Magic-EHD):



Re: Openpli update troubles topic #390 VU+NL

  • Senior Member
  • 6,424 posts

+12
Neutral

Posted 26 January 2011 - 07:56

Het verkeerslicht mag weer groen worden: alles gaat weer goed.
VU+ DUO/UNO/Digiality 85cm multifocus-4 X twin-Inverto-LNB's/Triax 88 USALS/Logitech Harmony 300, 555, 600, 900 en 1100

Re: Openpli update troubles topic #391 Loui (PD1LOI)

  • Senior Member
  • 4,597 posts

+146
Excellent

Posted 27 January 2011 - 13:35

Ik draai nu met de laatste OpenPli 2.0 maar als ik nStreamPlayer 0.3 installeer en wil gebruiken Crasht deze voledig.

Hier de Crashlog.
<?xml version="1.0" encoding="utf-8"?>
<opendreambox>
<enigma2>
<crashdate>Wed Jan 26 21:38:09 2011</crashdate>
<compiledate>Jan 26 2011</compiledate>
<contactemail>crashlog@dream-multimedia-tv.de</contactemail>
<!-- Please email this crashlog to above address -->
<skin>Magic-EHD/skin.xml</skin>
<sourcedate>Jan 26 2011</sourcedate>
<branch>(no branch)</branch>
<rev></rev>
<version></version>
</enigma2>
<image>
<dreamboxmodel>dm8000</dreamboxmodel>
<kernelcmdline>root=/dev/mtdblock3 rootfstype=jffs2 rw console=null</kernelcmdline>
<imageversion>
<!-- No such file or directory -->
</imageversion>
<imageissue>
<![CDATA[
OpenEmbedded Linux %h


openpli 2.0 %h

]]>
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<![CDATA[
loading bouquet... /etc/enigma2/userbouquet.sport.tv
35 entries in Bouquet userbouquet.sport.tv
loading bouquet... /etc/enigma2/userbouquet.kids.tv
76 entries in Bouquet userbouquet.kids.tv
loading bouquet... /etc/enigma2/userbouquet.news.tv
31 entries in Bouquet userbouquet.news.tv
loading bouquet... /etc/enigma2/userbouquet.orf.tv
15 entries in Bouquet userbouquet.orf.tv
loading bouquet... /etc/enigma2/userbouquet.music.tv
106 entries in Bouquet userbouquet.music.tv
loading bouquet... /etc/enigma2/userbouquet.arabic.tv
51 entries in Bouquet userbouquet.arabic.tv
loading bouquet... /etc/enigma2/userbouquet.turkish.tv
15 entries in Bouquet userbouquet.turkish.tv
loading bouquet... /etc/enigma2/userbouquet.russian.tv
27 entries in Bouquet userbouquet.russian.tv
loading bouquet... /etc/enigma2/userbouquet.asian.tv
29 entries in Bouquet userbouquet.asian.tv
loading bouquet... /etc/enigma2/userbouquet.eastern-europe.tv
48 entries in Bouquet userbouquet.eastern-europe.tv
loading bouquet... /etc/enigma2/userbouquet.religion.tv
37 entries in Bouquet userbouquet.religion.tv
loading bouquet... /etc/enigma2/userbouquet.allsats.tv
4 entries in Bouquet userbouquet.allsats.tv
loading bouquet... /etc/enigma2/userbouquet.favourites.tv
0 entries in Bouquet userbouquet.favourites.tv
35 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2/bouquets.radio
loading bouquet... /etc/enigma2/userbouquet.dbe00.radio
51 entries in Bouquet userbouquet.dbe00.radio
loading bouquet... /etc/enigma2/userbouquet.dbe01.radio
2 entries in Bouquet userbouquet.dbe01.radio
loading bouquet... /etc/enigma2/userbouquet.dbe02.radio
7 entries in Bouquet userbouquet.dbe02.radio
loading bouquet... /etc/enigma2/userbouquet.dbe03.radio
10 entries in Bouquet userbouquet.dbe03.radio
loading bouquet... /etc/enigma2/userbouquet.dbe04.radio
63 entries in Bouquet userbouquet.dbe04.radio
loading bouquet... /etc/enigma2/userbouquet.dbe06.radio
29 entries in Bouquet userbouquet.dbe06.radio
loading bouquet... /etc/enigma2/userbouquet.dbe07.radio
27 entries in Bouquet userbouquet.dbe07.radio
loading bouquet... /etc/enigma2/userbouquet.dbe08.radio
0 entries in Bouquet userbouquet.dbe08.radio
loading bouquet... /etc/enigma2/userbouquet.dbe09.radio
0 entries in Bouquet userbouquet.dbe09.radio
loading bouquet... /etc/enigma2/userbouquet.dbe05.radio
15 entries in Bouquet userbouquet.dbe05.radio
loading bouquet... /etc/enigma2/userbouquet.dbe0b.radio
20 entries in Bouquet userbouquet.dbe0b.radio
loading bouquet... /etc/enigma2/userbouquet.favourites.radio
0 entries in Bouquet userbouquet.favourites.radio
12 entries in Bouquet bouquets.radio
[eDVBLocalTimeHandler] enable sync local time with transponder time!
/usr/lib/python2.6/site-packages/twisted/internet/_sslverify.py:5: DeprecationWarning: the md5 module is deprecated; use hashlib instead
add dreampackage scanner plugin
added
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
- double buffering available!
9184kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/hdi.ttf...OK (Crs)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
--> setting scaler_sharpness to: 0000000D
couldn't open /proc/stb/misc/12V_output
[SETTING] getFlushSize= 0
[SETTING] getDemuxSize= 1540096
[ePopen] command: ip -o addr
[ePopen] command: ip -o addr
setLCDBrightness 25
setLCDBrightness 255
Activating keymap: Keyboard English
[ePopen] command: loadkmap < /usr/share/keymaps/eng.kmap
Activating language Nederlands
language set to nl_NL
/usr/lib/python2.6/site-packages/twisted/python/filepath.py:12: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
[FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/nStreamPlayer/MyriadPro-Regular.otf...OK (RegularIPTV)
[WebInterface] set language to nl
[WebInterface] set language to nl
[WebInterface] fallback to default translation for Webinterface
[AudioSync] set language to nl
[AudioSync] set language to nl
getModeList for port DVI-PC
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI-PC
getModeList for port DVI
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
setMode - port: DVI mode: 1080i rate: multi
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[SPLITSCEEN] resetting
starting hotplug handler
It's now Wed Jan 26 21:36:42 2011
[timer.py] next activation: 1296074302 (in 99136 ms)
[TIMER] record time changed, start prepare is now: Thu Jan 27 17:06:40 2011
[Timer] Record <RecordTimer.RecordTimerEntry object at 0x17a1c50>
It's now Wed Jan 26 21:36:42 2011
next real activation is Thu Jan 27 17:06:40 2011
[timer.py] next activation: 1296074302 (in 99107 ms)
It's now Wed Jan 26 21:36:42 2011
[timer.py] next activation: 1296074302 (in 99081 ms)
[SPLITSCEEN] resetting
[FanControl2] Starting up
[FanControl2] ATA(WDC WD1600AAJS-0) /dev/sda Mode:auto
[FanControl2] HDD Temperature not readable
[FanControl2] HDD supports Temp reading without Spinup
[FanControl2] Generic(USB CF Reader) /dev/sdc Mode:auto
[FanControl2] HDD Temperature not readable
[FanControl2] HDD not supports Temp reading without Spinup -> Disabled
[FanControl2] HDD Temp 0C
[FanControl2] HDD Temp 0C
[SKIN] Parsing embedded skin
[AutomaticVolumeAdjustment] Starting AutomaticVolumeAdjustment...
[AutomaticVolumeAdjustmentConfig] Loading config file...
[AutomaticVolumeAdjustmentConfig] Loaded 0 entries from config file...
[AutomaticVolumeAdjustment] initialize config values...
cannot open /proc/stb/audio/j1_mute(No such file or directory)
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[EPGC] time updated.. start EPG Mainloop
before: 1
after: 1
not showing fine-tuning wizard, config variable doesn't exist
showtestcard is false
[SKIN] Parsing embedded skin
setValue 100
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
[Trashcan] gotRecordEvent None None
RemovePopup, id = ZapError
[EPGC] 22047 events read from /hdd/epg.dat
[EPGC] 1380207 bytes for cache used
main thread is non-idle! display spinner!
playing 1:0:19:5212:C99:3:EB0000:0:0:0:
accel 8704 bytes
accel memstat: used=0 kB, free 9184 kB, s 0 kB
accel memory: 0
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 0c99:0003
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 12187000 Pol 0 SR 27500000 INV 2 FEC 4 orbpos 235 system 1 modulation 1 pilot 2, rolloff 0
tuning to 1587 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:5212:C99:3:EB0000:0:0:0:
allocate demux
[SEC] set static current limiting
set sequence pos 3
set sequence pos 4
[SEC] setVoltage 2
[SEC] sleep 200ms
child has terminated
pipes closed
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
child has terminated
pipes closed
[ePopen] command: route -n | grep ath0
poll: unhandled POLLERR/HUP/NVAL for fd 32(16)
child has terminated
pipes closed
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 37(17)
poll: unhandled POLLERR/HUP/NVAL for fd 40(16)
poll: unhandled POLLERR/HUP/NVAL for fd 41(16)
poll: unhandled POLLERR/HUP/NVAL for fd 43(17)
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
child has terminated
pipes closed
192.168
169.254
0.0.0.0
child has terminated
pipes closed
nameservers: [[192, 168, 1, 254]]
read configured interface: {'lo': {'dhcp': False}, 'ath0': {'dhcp': True}, 'eth0': {'dhcp': False}}
self.ifaces after loading: {'ath0': {'preup': False, 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0], 'postdown': False}, 'eth0': {'preup': False, 'ip': [192, 168, 1, 8], 'up': True, 'mac': '00:09:34:1c:82:34', 'dhcp': False, 'bcast': [192, 168, 1, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 254], 'postdown': False}}
[Toplevel.importExternalModules] Could NOT import external module: AutoTimer
[Toplevel.importExternalModules] Exception Caught
No module named AutoTimer.AutoTimerResource
[Toplevel.importExternalModules] Could NOT import external module: EPGRefresh
[Toplevel.importExternalModules] Exception Caught
No module named EPGRefresh.EPGRefreshResource
[Toplevel.importExternalModules] Imported external module: Example
[Webinterface] started on 0.0.0.0:80 auth=True ssl=False
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[WebInterface.unregisterBonjourService] No module named Bonjour.Bonjour
poll: unhandled POLLERR/HUP/NVAL for fd 41(16)
poll: unhandled POLLERR/HUP/NVAL for fd 42(16)
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038ff
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1, inversion off, m_tuning 2
(0)fe event: status 1f, inversion off, m_tuning 3
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1992738 running
no version filtering
0014: 70 00 00 00 00 00
mask: fc 00 00 00 00 00
mode: 00 00 00 00 00 00
[eEPGCache] channel 0x1992738 running
stop release channel timer
[EPGC] next update in 2 sec
[ePopen] command: ping -c 1 82.149.226.170
[ePopen] command: ping -c 1 193.99.144.85
[ePopen] command: ping -c 1 209.85.135.103
[ePopen] command: ping -c 1 82.149.226.170
[ePopen] command: ping -c 1 193.99.144.85
[ePopen] command: ping -c 1 209.85.135.103
[ePopen] command: ping -c 1 82.149.226.170
[ePopen] command: ping -c 1 193.99.144.85
[ePopen] command: ping -c 1 209.85.135.103
no version filtering
0012: 4e 52 12 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
ok ... now we start!!
no version filtering
0000: 00 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
eventNewProgramInfo 0 0
have 1 video stream(s) (0200), and 1 audio stream(s) (0064), and the pcr pid is 0200, and the text pid is 0020
allocate demux
disable teletext subtitles
decoder state: play, vpid=512, apid=100
DMX_SET_PES_FILTER(0x200) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x64) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x200) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x20) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
not pauseable.
[ePopen] command: ping -c 1 82.149.226.170
[ePopen] command: ping -c 1 193.99.144.85
[ePopen] command: ping -c 1 209.85.135.103
[AutomaticVolumeAdjustment] service changed
child has terminated
pipes closed
child has terminated
pipes closed
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 46(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 49(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 52(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 55(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 58(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 61(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 64(16)
poll: unhandled POLLERR/HUP/NVAL for fd 67(16)
+ 1/1 TID 00
done!
no version filtering
0a96: 02 52 12 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
doing version filtering
0000: 00 00 00 05 00 00
mask: ff 00 00 3f 00 00
mode: 00 00 00 3e 00 00
poll: unhandled POLLERR/HUP/NVAL for fd 70(16)
[SEC] set dynamic current limiting
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 84(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 87(16)
+ 1/1 TID 02
done!
eventNewProgramInfo 0 0
have 1 video stream(s) (0200), and 1 audio stream(s) (0064), and the pcr pid is 0200, and the text pid is 0020
decoder state: play, vpid=512, apid=100
[eDVBCAService] new service 1:0:19:5212:C99:3:EB0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:5212:C99:3:EB0000:0:0:0:
[eDVBCIInterfaces] gotPMT
demux 0 mask 01 prevhash 00000000
doing version filtering
0a96: 02 52 12 2b 00 00
mask: ff ff ff 3f 00 00
mode: 00 00 00 3e 00 00
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 90(16)
[WebInterface.plugin.isAuthenticated] Streaming auth is disabled bypassing authcheck because host is '127.0.0.1'
-+ 1/2 TID 4e
sdt update done!
[EPGC] start caching events(1296074212)
++ 2/2 TID 4e
done!
doing version filtering
0012: 4e 52 12 35 00 00
mask: ff ff ff 3f 00 00
mode: 00 00 00 3e 00 00
action -> InfobarMenuActions mainMenu
loading mainmenu XML...
TimerEdit TimerEditList
PluginBrowser PluginBrowser
valign must be either top, center or bottom!
[FanControl2] Fan Reset
[FanControl2] Vlt:255 Pwm:255 Fan:4pin - BoxOn HDDon
[FanControl2] actueelRPM:2130 doelRPM:2150 Temp:43.0
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] abort non avail mhw reading
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
action -> OkCancelActions ok
okbuttonClick
[FanControl2] Vlt:255 Pwm:255 Fan:4pin - BoxOn HDDon
[FanControl2] actueelRPM:3360 doelRPM:2150 Temp:43.0
[EPGC] nownext finished(1296074227)
[TVCharts] Status Update ...
[FanControl2] Vlt:255 Pwm:250 Fan:4pin - BoxOn HDDon
[FanControl2] actueelRPM:3360 doelRPM:2150 Temp:43.0
[FanControl2] Vlt:255 Pwm:245 Fan:4pin - BoxOn HDDon
[FanControl2] actueelRPM:3330 doelRPM:2150 Temp:43.0
[FanControl2] Vlt:255 Pwm:240 Fan:4pin - BoxOn HDDon
[FanControl2] actueelRPM:3270 doelRPM:2150 Temp:43.0
[FanControl2] Vlt:255 Pwm:235 Fan:4pin - BoxOn HDDon
[FanControl2] actueelRPM:3240 doelRPM:2150 Temp:43.0
[EPGC] 1380330 bytes for cache used
[FanControl2] Vlt:255 Pwm:230 Fan:4pin - BoxOn HDDon
[FanControl2] actueelRPM:3240 doelRPM:2150 Temp:43.0
[FanControl2] Vlt:255 Pwm:225 Fan:4pin - BoxOn HDDon
[FanControl2] actueelRPM:3240 doelRPM:2150 Temp:43.0
action -> WizardActions ok
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
File "/usr/lib/enigma2/python/Screens/PluginBrowser.py", line 103, in save
File "/usr/lib/enigma2/python/Screens/PluginBrowser.py", line 107, in run
File "/usr/lib/enigma2/python/Plugins/Extensions/nStreamPlayer/plugin.py", line 43, in Start_iptv_palyer
STREAMS.get_list()
File "/usr/lib/enigma2/python/Plugins/Extensions/nStreamPlayer/streams.py", line 92, in get_list
group_name.encode('utf-8'),
UnicodeDecodeError: 'ascii' codec can't decode byte 0xd0 in position 0: ordinal not in range(128)
(PyObject_CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap instance at 0x190ecd8>>,('WizardActions', 'ok')) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
</enigma2crashlog>
</crashlogs>
</opendreambox>

Re: Openpli update troubles topic #392 ReneW

  • Senior Member
  • 160 posts

0
Neutral

Posted 27 January 2011 - 16:43

Misschien handig te vermelden voor anderen ook. Nadat je vandaag hebt geupdate moet je je Softcam/CI opnieuw instellen. Bij mij bleef het zwart totdat ik elders hier ook las dat de CCCam opnieuw geinstalleerd was.

Re: Openpli update troubles topic #393 littlesat

  • PLi® Core member
  • 57,084 posts

+698
Excellent

Posted 27 January 2011 - 16:51

Ik vermoed dat je xml config file waar de streams in staan niet helemaal goed is...

Re: Openpli update troubles topic #394 ReneW

  • Senior Member
  • 160 posts

0
Neutral

Posted 27 January 2011 - 17:40

ik heb helemaal geen veranderingen doorgevoerd in welke config file ook, ik zag alleen wel dat er voor de softcam niets meer ingesteld stond en nadat ik daar CCcam weer ingezet had, dat het weer normaal werkte

Re: Openpli update troubles topic #395 VU+NL

  • Senior Member
  • 6,424 posts

+12
Neutral

Posted 27 January 2011 - 17:44

Hier precies zo (met alleen een lokaal kaartje en geen enkele .cfg): na de online update (en de bijbehorende reboot) zwart beeld, opnieuw opstarten (zowel van CCCam als van de box) hielp niet. Het deïnstalleren van CCcam, reboot, CCCam wederom installeren gaf (heel snel) beeld als vanouds.
VU+ DUO/UNO/Digiality 85cm multifocus-4 X twin-Inverto-LNB's/Triax 88 USALS/Logitech Harmony 300, 555, 600, 900 en 1100

Re: Openpli update troubles topic #396 metoo

  • Senior Member
  • 1,573 posts

+33
Good

Posted 27 January 2011 - 18:21

ik moest met de 800 alleen de softcam weer selecteren/activeren dat was voldoende

ET10000 C C C C/T  2TB HDD ET7000 + ET6000 dvb-S  OpenPli Triax 88 multifeed quad LNBs VU Uno4K SE C+2TB HDD Mutant HD60


Re: Openpli update troubles topic #397 ste3lo

  • Senior Member
  • 62 posts

0
Neutral

Posted 27 January 2011 - 18:36

Op de VU+ Duo staat geen selecteren/activeren functie

Re: Openpli update troubles topic #398 Satkieker

  • Senior Member
  • 198 posts

0
Neutral

Posted 27 January 2011 - 23:35

Op de VU+ Duo staat geen selecteren/activeren functie

Dat zit ook wel op de VU DUO softcam activeren.

1: Druk op menu
2: Dan instellingen
3: Dan softcam/CI
4: Dan softcam setup
5: Dan Select softcam zoek daar de met pijl naast de OK toets de softcam tussen dan op OK
6: Dan restart softcam

~ VU+ DUO - 4K ~ Open pli® 7 ~ HUMAX 5100 ~ Kabelbox ~ TRIAX 78 ~ Astra (19,2) Astra (23,5)


Re: Openpli update troubles topic #399 ste3lo

  • Senior Member
  • 62 posts

0
Neutral

Posted 28 January 2011 - 06:36

Op de VU+ Duo staat geen selecteren/activeren functie


Dat zit ook wel op de VU DUO softcam activeren.

1: Druk op menu
2: Dan instellingen
3: Dan softcam/CI
4: Dan softcam setup
5: Dan Select softcam zoek daar de met pijl naast de OK toets de softcam tussen dan op OK
6: Dan restart softcam



Ok dankje :)

Re: Openpli update troubles topic #400 Dream1975

  • Senior Member
  • 1,634 posts

+14
Neutral

Posted 28 January 2011 - 08:51

Ik gebruik fancontrol 2 om mijn fan in de 8000 aan te sturen. Als ik nu op de blauwe knop druk zie ik de fancontrol 2 monitor er 2 keer tussen staan. Deinstalleer ik hem en kijk ik in de plugin downloads dan zie ik de fancontrol 2 er 2x tussen staan. Bij installeren van één van de 2 komt de dubbele entrie in het blauwe knopmenu weer terug (dus het lijkt dat als je er één selecteerd hij beide meeneemt).

Fancontrol doet het wel gewoon dus is niet ernstig, maar denk ik zet het even hier neer opdat dit (cosmetisch) opgelost kan worden /images/smiley/wink.gif

Mutant HD2400, OpenPLi nightly, 2x DVB-C & 2x DVB-S

Mutant HD51, OpenPLi nightly, 1x DVB-C & 1x DVB-S

Wavefrontier T55 (Astra 1,2,3 en HB)

Smartcards Ziggo (Irdeto) and CDS (Seca) on Oscam

 




Also tagged with one or more of these keywords: Algemeen

5 user(s) are reading this topic

0 members, 4 guests, 0 anonymous users


    Bing (1)