Posted 30 November 2020 - 09:37
for me not work... (hdd and usb)
(zgemma h9 combo, openpli 20201116 slot1, backupsuite git512+952edc-r0.0)
Related to https://github.com/E...77838d3dbe9d7c4 ?
@WanWizard any idea?
not work!
What's the result of
cat /proc/stb/info/boxtypefor you?
For me is:
root@h9:~# cat /proc/stb/info/boxtype
H9 Combo
Posted 30 November 2020 - 14:03
for me not work... (hdd and usb)
(zgemma h9 combo, openpli 20201116 slot1, backupsuite git512+952edc-r0.0)
Related to https://github.com/E...77838d3dbe9d7c4 ?
@WanWizard any idea?
not work!
What's the result of
cat /proc/stb/info/boxtypefor you?
For me is:
root@h9:~# cat /proc/stb/info/boxtype
H9 Combo
Thanks a lot, now I know what's the problem.
@WanWizard
Just take a look, Zgemma added space too! Not just uppercase also space!
Open Vision sources: https://github.com/OpenVisionE2
Posted 30 November 2020 - 14:27
happy to contribute
Edited by ferra1, 30 November 2020 - 14:29.
Posted 30 November 2020 - 14:59
Just take a look, Zgemma added space too! Not just uppercase also space!
I wonder what they'll come up with next...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 30 November 2020 - 15:25
root@h9combo:~# cat /proc/stb/info/boxtype
H9 Combo
What is the problem?
Posted 30 November 2020 - 15:31
The problem is that is the last few driver updates, they've changed from "h9combo" to "H9Combo" to "H9 Combo", and this value is used by the software to determine on which box it runs.
The standard is 1 word (so no spaces) and lowercase. A rule they broke, and with that they broke all software.
If you have 8.0-RC installed, please:
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 30 November 2020 - 16:01
happy to contribute
I hope https://github.com/O...fa27e2785650ea4 fix the problem for you so @WanWizard needs to push the new version on the feeds.
The one and the only reason I'm still helping with this matter is the great attitude of WanWizard.
He has a really great personality.
Open Vision sources: https://github.com/OpenVisionE2
Posted 30 November 2020 - 16:04
The problem is that is the last few driver updates, they've changed from "h9combo" to "H9Combo" to "H9 Combo", and this value is used by the software to determine on which box it runs.
The standard is 1 word (so no spaces) and lowercase. A rule they broke, and with that they broke all software.
If you have 8.0-RC installed, please:
- check the help on the box: does it show the correct remote, and if you walk through the items, does it point to the correct keys on the remote?
- On the web interface, does it show the correct box and info on the boxinfo page? If you open the full remote, does it show the correct remote?
I think Open WebIF problem is fixed now: https://github.com/E...77838d3dbe9d7c4
Open Vision sources: https://github.com/OpenVisionE2
Posted 30 November 2020 - 16:20
If you have 8.0-RC installed, please:
- check the help on the box: does it show the correct remote, and if you walk through the items, does it point to the correct keys on the remote?
- On the web interface, does it show the correct box and info on the boxinfo page? If you open the full remote, does it show the correct remote?
I have 7.3
Posted 30 November 2020 - 16:37
The problem is that is the last few driver updates, they've changed from "h9combo" to "H9Combo" to "H9 Combo", and this value is used by the software to determine on which box it runs.
The standard is 1 word (so no spaces) and lowercase. A rule they broke, and with that they broke all software.
If you have 8.0-RC installed, please:
- check the help on the box: does it show the correct remote, and if you walk through the items, does it point to the correct keys on the remote?
- On the web interface, does it show the correct box and info on the boxinfo page? If you open the full remote, does it show the correct remote?
I think Open WebIF problem is fixed now: https://github.com/E...77838d3dbe9d7c4
But this fix isn't good as there may be "i55 se" later or any other ...
Spaces should be omitted permanently with a replace and go like before.
Open Vision sources: https://github.com/OpenVisionE2
Posted 30 November 2020 - 16:42
The problem is that is the last few driver updates, they've changed from "h9combo" to "H9Combo" to "H9 Combo", and this value is used by the software to determine on which box it runs.
The standard is 1 word (so no spaces) and lowercase. A rule they broke, and with that they broke all software.
Have they been informed of this?
Posted 30 November 2020 - 16:53
We've mentioned it and the answer was the boxtype should reflect the model name. Or something to that effect... 
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 3 December 2020 - 22:17
Can somebody confirm if "duo4kse" from vu+ is supported by backupsuite?
Posted 3 December 2020 - 22:19
From the looks of it, not (yet): https://github.com/O.../commits/master
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 4 December 2020 - 13:45
From the looks of it, not (yet): https://github.com/O.../commits/master
Is the modification of the supported boxlist already on the roadmap?
Posted 4 December 2020 - 16:17
No idea, it's a third party application, you'll have to discuss that with the author, "Persian Prince".
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 6 December 2020 - 20:45
No idea, it's a third party application, you'll have to discuss that with the author, "Persian Prince".
I will check it my friend, if you know Vu+ please ask them to send us at least one sample (any 4K model but duo4kse would be better because we have kernel probem with it also and our images won't boot on it) as nobody in our team has Vu+ so it's a blindspot for us.
We have team members in europe.
Edited by Persian Prince, 6 December 2020 - 20:52.
Open Vision sources: https://github.com/OpenVisionE2
Posted 6 December 2020 - 20:55
I would love to but I don't think they'll respond kindly to such a request... 
The Duo 4K SE has the same kernel as the Ultimo 4K, not as the Duo 4K, so many you go wrong there?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 6 December 2020 - 22:33
I would love to but I don't think they'll respond kindly to such a request...
The Duo 4K SE has the same kernel as the Ultimo 4K, not as the Duo 4K, so many you go wrong there?
Their loss as we simply don't care, when users want something we have no idea.
This is our defconfig for ultimo4k which boots fine: https://github.com/O...imo4k/defconfig
This is our defconfig for duo4kse which won't boot: https://github.com/O...o4kse/defconfig
Any idea?
Open Vision sources: https://github.com/OpenVisionE2
Posted 6 December 2020 - 22:54
I'm not home right now, so can't do much. How does that compare to what we have, as our 8.0-rc image works fine.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
0 members, 10 guests, 0 anonymous users
