369 replies to this topic

[Dimitrij]

/etc/init.d/halt
Why bootlogo removed at shutdown?

if test -e /usr/share/switchoff.mvi
then
showiframe /usr/share/switchoff.mvi
fi

[pieterg]

only the 800 needs it (all other boxes shut themselves down) and since we're not supporting the 800 in 3.0, this was a good chance to get rid off all switchoff.mvi stuff

[darko-88]

Hello

I flashed my dm8000 by latest openpli30 beta and I have problem because EPG data is saved on hdd, how change it to usb? I think that in System mamagement shoud be storage device options where we can mount storage device and set EPG saves but there is no it. Where can I find file responsible for place where is saving EPG data?

Greetings
Darko

[metoo]

place those 2 in etc/enigma2/settings

config.misc.epgcache_filename=/media/usb/epg.dat
config.misc.epgcachepath=/media/usb/

[gregoire]

Great, I have dome the change to have the epg stored on my cf :-)

[Hump]

I finally migrated to OpenPLi 3.0. Everything works like a charm. I think it's the the right time for all users to do the same.

Big thanks goes to the OpenPLi Team for the excellent work!

[gregoire]

place  those 2 in etc/enigma2/settings

config.misc.epgcache_filename=/media/usb/epg.dat
config.misc.epgcachepath=/media/usb/

I have that at the end of /etc/enigma2/settingsconfig.misc.epgcache_filename=/media/cf/epg.datconfig.misc.epgcachepath=/media/cf/I had rebooted the box, the epg seems to be on /media/cf/epg.dat (the date of the file is from two days ago even if xmltvimport claims to have imported events this morning) ?My "problem" is that it takes time to change channel as it wake up my hard disc : is there anything else I could check in order to not have my disc waken up unless I reccord/play a reccording ?Thanks for this tremendous image !!!

[metoo]

picons on your hdd?

epg is always in memory, only writen to hdd, cf, usb by shutdown, and read back into memory with startup

[alsat1]

Did plugin cooltv guide is possible to install from feed on pli 3.0?

[Taykun345]

yes

[alsat1]

thanks.

[littlesat]

Did plugin cooltv guide is possible to install from feed on pli 3.0?

Dit you try our own standard GraphMultiEPG with our standard skin?

[gregoire]

picons on your hdd?

epg is always in memory, only writen to hdd, cf, usb by shutdown, and read back into memory with startup

Good to know :-)So I looked for the picons setup, but I wasn't able to find anything (grep in etc).Could you help me find out where to set picons dir (or even better just disable it as I don't understant what use it could serve) ?

opkg list_installed|grep -i pico

shows nothing installed.

[MiLo]

Picons work automatic, it'll use whatever is available. So check if you actually have picons on your disk, rename or remove the directory if you don't want to use them.

[gregoire]

Thanks for the info, I had a picon dir on my HD from an old install, I delete it and I will see how this goes :-)

Thank you again very much !!!

[Dimitrij]

Double mount...
/etc/fstab

rootfs			   /					auto	   defaults			  1  1
proc				 /proc				proc	   defaults			  0  0
devpts			   /dev/pts			 devpts	 mode=0620,gid=5	   0  0
usbfs				/proc/bus/usb		usbfs	  defaults			  0  0
tmpfs				/var/volatile		tmpfs	  defaults			  0  0
#UUID=45c1828e-bc38-4698-9c12-e6f93fb0f244  /media/usb-hdd auto	   defaults			  0  0 #Trancend 500 gig
UUID=87f42066-c5e1-4526-87d2-c63ffa0f04ba /media/hdd auto defaults 0  0
UUID=889AA67D9AA66800 /media/usb auto defaults 0  0

blkid

root@et9x00:~# blkid
/dev/sdb1: UUID="889AA67D9AA66800" TYPE="ntfs"
/dev/sda1: UUID="87f42066-c5e1-4526-87d2-c63ffa0f04ba" TYPE="ext3"

df -h

root@et9x00:~# df -h
Filesystem				Size	  Used Available Use% Mounted on
ubi0:rootfs			 105.1M	 72.3M	 32.7M  69% /
devtmpfs				142.2M	  4.0K	142.2M   0% /dev
tmpfs					64.0K		 0	 64.0K   0% /media
/dev/sda1			   596.2G	244.5G	351.7G  41% /media/sda1
/dev/sdb1				 7.4G	172.4M	  7.2G   2% /media/sdb1
tmpfs				   142.4M	248.0K	142.1M   0% /var/volatile
/dev/sda1			   596.2G	244.5G	351.7G  41% /media/hdd
/dev/sdb1				 7.4G	172.4M	  7.2G   2% /media/usb

mount

root@et9x00:~# mount
rootfs on / type rootfs (rw)
ubi0:rootfs on / type ubifs (rw,relatime)
devtmpfs on /dev type devtmpfs (rw,relatime,size=145660k,nr_inodes=36415,mode=755)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
tmpfs on /media type tmpfs (rw,relatime,size=64k)
/dev/sda1 on /media/sda1 type ext4 (rw,relatime,data=ordered)
/dev/sdb1 on /media/sdb1 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)
usbfs on /proc/bus/usb type usbfs (rw,relatime)
tmpfs on /var/volatile type tmpfs (rw,relatime)
/dev/sda1 on /media/hdd type ext4 (rw,relatime,data=ordered)
/dev/sdb1 on /media/usb type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)

Edited by Dima73, 29 July 2012 - 08:50.

[alsat1]

Did plugin cooltv guide is possible to install from feed on pli 3.0?

Dit you try our own standard GraphMultiEPG with our standard skin?

Standard MultiEpg is ok on pli,but I to long using cooltvguide Anyway I know its work on 3.0 the same as on 2.1 but Iam still staiyng with 2.1,when will have more time will migrate to 3.0 for permament and make it run the same like on 2.1 now for me(all is smashing )I need to know which renderers are the same on 3.0 like was on 2.1 for some skin.Already I make I nice little mod of LT6-HD skin by neku which is work for me very good(using gbox).





If I will know which renderers are the same on 3.0 like on 2.1 will change to 3.0 and make the same mod of this skin.Yesterday I tested 3.0 and is ok,its work on usb with barryallen which 2.1 not.But already I dont have time to tweak image like I done that on 2.1 for months
Regards.

[littlesat]

The standard renderers available in openPli3.0 are the same... In fact regards E2 there is no difference between 2.1 and 3.0.
However it might be that compiled renderers without sources included in skins (Grrrmmmbl) could not work due to the newer python in 3.0....
But you still can change a skin to our opensource PLi renderers (see examples in our standard Pli-HD skin) and possible when you miss something open code could be added.

[gregoire]

I found a "bug" with 3.0 :

/usr/bin/newcs 
/usr/bin/newcs: error while loading shared libraries: libcrypto.so.0.9.7: cannot open shared object file: No such file or directory

which is "workaroundfixed" by :

cd /lib/
ln -s libcrypto.so.0.9.8 libcrypto.so.0.9.7

and then :

/usr/bin/newcs 
This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 11:56:53
Reading Config file from /var/tuxbox/config/newcs.xml
Cannot open config file... quitting

which is "workaroundfixed" with :

cd /var/
ln -s /etc/tuxbox

[indrek70]

Installed today the latest version of 3.0 into my 7020HD. First was problem with MgCamd - I saw the connection to the card server, but no picture. The I changed in MgCamd conf file the automatic box choose 00 to 06 Dreambox .... During of this work I had a small problem with my DCC-e2 v 1.5, no telnet connection (telnet login incorrect), only ftp was ok. Now I lost also ftp connection. I think it happens after I made over menu software upgrade.