369 replies to this topic

[acarus1175]

just a suggestion of what drivers??

[lolly]

Setpasswd error

it change the password but a login is not possible.

[pieterg]

Setpasswd error

it change the password but a login is not possible.

are you using the latest build?

I've just tested this, login with telnet, root, no password.
passwd
1234
(repeat)
exit

login with telnet, root, 1234

Works fine here?

[lolly]

@ the moment have i the build OpenPLi-3.0-beta-vuultimo-20120531_usb.zip

I test tommorow the latest build

Edit: with no password locks the login over telnet fine.

Edited by lolly, 1 June 2012 - 20:04.

[pieterg]

there is a more recent build online at the moment

[robertut]

There is no 3.2 kernel for the DM800 because it is running much slower than with 2.6.18

Lame excuse. Running "slower" is of little importance, the CPU load rarely exceeds 1% anyway. "Slower" is way better than "not at all".

Exactly...

Not quite... Try a simple scenario like this with a DM800:
- USB DVB-T tuner module installed
- record a HD channel from USB DVB-T tuner on the internal Sata disk
- watch another HD channel from Satellite tuner
The OSD menu GUI becomes unresponsive, often freezes totally (you can't change a channel anymore) because CPU goes 99%.

The exactly same setup (same USB tuner + same OpenPLi 2.1 image) with NAS mounted instead of internal disk uses CPU only about 10-20% in the same scenario. You don't even feel anything on Enigma GUI, and you can even enable PiP meanwhile...

I'm glad I got rid of the old DM800 and got for the same money (+saved 10EUR) an ET6000. Not clone...

[littlesat]

As far I know DVB-USB is not implemented in 3.0 yet... this is work-in-progress.

How did you install those drivers?

Edited by littlesat, 2 June 2012 - 09:18.

[robertut]

I am using them in 2.1. But the discussion was about hardware capabilities of the old DM800, which can't even run 3.0 anyway...

[littlesat]

This is a 3.0 thread.... so you were off tipic here....

Edited by littlesat, 2 June 2012 - 11:33.

[boutchous]

I test your new version 3.0 and it's working fine here on VU+ Uno
Only a problem with my usb , with ftp program i can see /media/usb but my VU don't use it , i have picon and crossepg but the VU seems ignore
It's strange because when i make fullbackup with plugin from pedro it's working perfect and the VU can use the same stick
Yesterday when i flash your img i have initialise my stick and crossepg and picon work perfect , the problem appairs after reboot it seems

Thanks for your work PLI team

[metrik]

I've just installed open-pli 3.0 on my DM8000. First of all I want to thank the whole developing team!
I have one problem... I can't find how to set the wlan, I don't find the option to search the available wifi network...

Thank you again!

claude

The wireless lan its ok in this image OpenPLi-3.0-beta-dm7020hd-20120602 ?
The problem are solved or i need more time?
I really want this image on my dm7020hd but need to have wlan.

[emer]

We have OE 2.0 from DMM for 800HD (but no new kernel) , but OpenPLi is still 2.1 for this box - in future can we expect OpenPLi beta higher than 2,1 (with old kernel) ?

[littlesat]

As far I know wlan should be fixed in the latest OE3.0

[Pr2]

Hi,

Here is some bugs I found on OpenPli 3.0, on Xtrend ET-9x00.

Bug 1: Unable to install enigma2-plugin-extensions-et-webbrowser

root@et9x00:/usr/script# opkg install enigma2-plugin-extensions-et-webbrowser
Installing enigma2-plugin-extensions-et-webbrowser (1.5.3-r0) to root...
Downloading http://downloads.pli...x00/3rd-party/e
nigma2-plugin-extensions-et-webbrowser_1.5.3-r0_et9x00.ipk.
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for enigm
a2-plugin-extensions-et-webbrowser:
* gst-plugin-rtmp * gst-plugin-mms * gst-plugin-asf *
* opkg_install_cmd: Cannot install package enigma2-plugin-extensions-et-webbrow
ser.
root@et9x00:/usr/script#

When I search for gst-plugin in opkg list, I found some but they have bad or ugly in there names, so I don't try to install them.

Bug 2: error message at telnet login prompt with strange symbol input.

openpli 3.0 et9x00

et9x00 login: /^H^H^H
login: loginprompt.c:164: login_prompt: Assertion `wlen == (int) len -1' failed.

I miss type my login and then use backspace (^H) then press enter, I receive this error message and telnet session is aborted.

Bug 3: OpenWebif grabscreen doesn't work.

Go to OpenWebif then chose: Box Control - Grab Screenshot.

[mamisnyou]

openpli 3.0

i tried, this morning thr released openpli 3.0 of today:
- it's more working, thane these of last days.
same bugs fixed , lake uninstalling plug we have access to them.
, also time zoneis fixed
, the list of plug start to be full......
- same thing stay not fixed, lake starting with forma 4.3 in stead of 19/16 forma of the starting picture (flowers and logo of openpli)
, weather; no access to the menu to edit cities, but it stope working since the strting op new kernel of op2.1;
we can use foresa weather for 10 days.
, same plugs are impossible to install; for exemple; tspanel, dreamexplorer.....etc
, the skin glass 16 v 6.10 (witch the most complete skin) can be installed, but after ;it deseapper the list of the plug,
to retrive the list of the plug you have to choose open hd skin.

Please, administrator or openpli team, I ask you to try to develop one soft that includ these plugs; foresa, dreamexplorer glass 16 v6.10,
cccam 221 and 230, cccam prio maker cccam info, ccoltvguide, backupsuite10 tspanel, vlc, permanentclok, ecm info,
automaticvolume adjustment.
If you do that, you can realize that's the perfect soft at all.
thinks from me ,mamisnyou from morocco, and from all the user of openpli a rond the word.

[littlesat]

For the glass skin you have to contact the maker of the class skin. It seems they adapted to closed source E2 from DMM because the plugins are not vissable this is likely verfied. In addition a lot of plugins need to be adapted.

In addition please note 3.0 is in Alpha stage... but thanks for testing it....

[christophecvr]

On the dm8000 , Still spontanioussely freezes . No action is required, The channels stays playing well. It's just a freeze From control screen. Gues you can call it shell.

The only way to unfreeze (apart from hard reset ) . Is to start a telnet session it immediatelly unfreezes even before you login, Or just starting an ftp session with for example gftp.

Now I dropped on this ipv6 problem. A couple of years ago this ipv6 also caused freezes on a debian lenny pc solution was to disable it. This in despit the fact thet what frooze at first did not seemed to be related to the network.

http://openpli.org/f...disabling-ipv6/

I'm just giving it a try now . I removed the kernel-module-ipv6 with opkg remove --force-depends.
Rebooted.

Will let know If, .. How weird it should be did or did not solved the freeze problem.

I added the dmesg after freeze problem, But it does not say much.

Attached Files

•  freezedm8000.txt   8.42KB   10 downloads

[littlesat]

Seems the DMM drivers for the DM8000 are not IPV6 compatible....

[pieterg]

I don't think it is related to ipv6.

[blzr]

seems it is dmm drivers issue indeed,
it has been reported here and there:
http://openpli.org/f...post__p__280145
and from your dmesg log:

[11737.278000] rave record buffer detected
[12812.074000] bcm4506: signal_strength -215.39dbm
[20968.933000] rave record buffer overflow detected
[20979.880000] bcm4506: signal_strength -211.63dbm
[21812.461000] bcm4506: signal_strength -210.93dbm
[22017.599000] rave record buffer overflow detected
[22112.413000] bcm4506: signal_strength -205.18dbm
[25411.856000] bcm4506: signal_strength -211.04dbm
[26912.561000] bcm4506: signal_strength -214.91dbm
[27512.078000] bcm4506: signal_strength -208.70dbm
[29312.587000] bcm4506: signal_strength -209.20dbm
[31112.306000] bcm4506: signal_strength -211.10dbm
[32340.583000] rave record buffer overflow detected
[32342.018000] bcm4506: signal_strength -217.32dbm
[37748.443000] rave record buffer overflow detected
[37768.584000] bcm4506: signal_strength -210.25dbm
[38911.993000] bcm4506: signal_strength -213.71dbm
[41098.944000] rave record buffer overflow detected
[41101.455000] bcm4506: signal_strength -207.79dbm

does not look like the ipv6 problem /?/