Jump to content


Photo

OpenPLi 3.0: from alpha to beta status....


  • Please log in to reply
282 replies to this topic

Re: OpenPLi 3.0: from alpha to beta status.... #41 littlesat

  • PLi® Core member
  • 57,081 posts

+698
Excellent

Posted 26 September 2012 - 07:07

As usually it is installed as soon you install a softcam via our feeds.... That's how it is made.... But why do you need a custom cam?

Edited by littlesat, 26 September 2012 - 07:07.

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: OpenPLi 3.0: from alpha to beta status.... #42 Pr2

  • PLi® Contributor
  • 6,166 posts

+261
Excellent

Posted 26 September 2012 - 09:36

Hi,

Severals reasons:
- I use softcam that are not in your feeds
- I switch between softcams to do testing.
- I backup my softcams (a simple .tgz file containing all the files) then install the new image and then I restore the softcam.

I was really thinking that since Softcam Setup is in the menu of Openpli by default it doesn't require any external feeds .ipk to work.
I agree that most end-users are simply downloading the softcam from the feeds (many are lost when they need to install a softcam manually), so most users doesn't have this problem, but I am still convinced that softcam-setup should be active in the default build. This doesn't harm anything in the Openpli image if it is there and this will be consistent with the Openpli menu. :)

NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: OpenPLi 3.0: from alpha to beta status.... #43 littlesat

  • PLi® Core member
  • 57,081 posts

+698
Excellent

Posted 26 September 2012 - 09:57

If you install it manually then you can also use opkg to install the extra required packages... The standard is no softcam that is why it should not be there by default. there isn't even a /etc/init.d/softcam to start there.

Edited by littlesat, 26 September 2012 - 09:58.

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: OpenPLi 3.0: from alpha to beta status.... #44 greatred

  • Senior Member
  • 268 posts

+2
Neutral

Posted 26 September 2012 - 11:59

Is it only my setup or is the option mentioned in this commit completely missing in Menu -> System -> Settings ?
Worth mentioning is that applying the "echo "hold" /proc/stb/video/zapmode" command is working fine.

I`m running the most recent OpenPLi 3.0 for VU Uno.

Re: OpenPLi 3.0: from alpha to beta status.... #45 Pr2

  • PLi® Contributor
  • 6,166 posts

+261
Excellent

Posted 26 September 2012 - 12:19

... The standard is no softcam that is why it should not be there ...


I totally agree with you than in standard image Menu: Softcam / Common Interface
Should only display: Common Interface
And not: Common Interface and Softcam Setup...

The fact that menu: Softcam Setup... is there is not standard, so it should not be there. You need to be coherent with your standard.

NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: OpenPLi 3.0: from alpha to beta status.... #46 blzr

  • PLi® Core member
  • 2,270 posts

+118
Excellent

Posted 26 September 2012 - 17:45

Is it only my setup or is the option mentioned in this commitcompletely missing in Menu -> System -> Settings ?
Worth mentioning is that applying the "echo "hold" /proc/stb/video/zapmode" command is working fine.

I`m running the most recent OpenPLi 3.0 for VU Uno.

hmm, are you sure?
AFAIK in vu+ it's /proc/stb/video/zapping_mode
and this little diferrence makes this menu entry unavailable in customize menu on vu boxes...
True sarcasm doesn't need green font...

Re: OpenPLi 3.0: from alpha to beta status.... #47 MiLo

  • PLi® Core member
  • 14,055 posts

+298
Excellent

Posted 26 September 2012 - 17:53

OK, then question is, why the package: softcam-support is not installed by default in the image (the one that creates the K50softcam and S50softcam).


It is automatically installed when you install the "Custom" softcam, which - as I wrote before - was intended especially for what you are doing.

Since in the GUI the menu is already there, I was expecting to have it properly working out-of-the-box.


That's what I wanted, but approached from the other side: The option should not be there unless you ask for it.

The softcam selection plugin was not intended to be installed by default, because the menu item isn't useful for 99% of the users who only use a single softcam. But there were too many people unable to find their so beloved menu item when it had to be installed manually, that it finally got installed by default.
Real musicians never die - they just decompose

Re: OpenPLi 3.0: from alpha to beta status.... #48 greatred

  • Senior Member
  • 268 posts

+2
Neutral

Posted 26 September 2012 - 19:26


Is it only my setup or is the option mentioned in this commitcompletely missing in Menu -> System -> Settings ?
Worth mentioning is that applying the "echo "hold" /proc/stb/video/zapmode" command is working fine.

I`m running the most recent OpenPLi 3.0 for VU Uno.

hmm, are you sure?
AFAIK in vu+ it's /proc/stb/video/zapping_mode
and this little diferrence makes this menu entry unavailable in customize menu on vu boxes...


@blzr it is "zapping_mode" indeed - I was typing while being away from the box.
But the core of the problem remains: the option is not available under Menu -> Setup -> System Settings -> Other Settings.

Attached File  screenshot.jpg   59.32KB   116 downloads

I expected to find this configuration setting like shown in this screenshot

Attached File  screenshot (1).jpg   90.4KB   117 downloads

Re: OpenPLi 3.0: from alpha to beta status.... #49 Frogman

  • Senior Member
  • 389 posts

+68
Good

Posted 26 September 2012 - 19:40

... sorry, mistaken post

Edited by Frogman, 26 September 2012 - 19:43.

Most problems can be solved simply by a closer look.

Re: OpenPLi 3.0: from alpha to beta status.... #50 greatred

  • Senior Member
  • 268 posts

+2
Neutral

Posted 26 September 2012 - 19:45

I`m running the most recent OpenPLi 3.0 for VU Uno.


OK maybe I was not precise enough - recent means updated regulary...
Why should I run an outdated software and check the development on GIT???

@blzr @Frogman: could you please confirm that this option is available for you?

Re: OpenPLi 3.0: from alpha to beta status.... #51 blzr

  • PLi® Core member
  • 2,270 posts

+118
Excellent

Posted 26 September 2012 - 20:09

well, I know what did you mean...
//and no, this option is not present on my vuduo as well ;)
and just like I wrote it's because of this different vu's naming, setup it through menu entry is not available...
SystemInfo["ZapMode"] = os.path.exists("/proc/stb/video/zapmode")

so, either vuplus will change it (extremely doubtful),
or PLi will patch e2 for vu (they should be used to it, but, again?... :P)
or you still will be able to change it manually or using third party zappingmodeselection plugin
True sarcasm doesn't need green font...

Re: OpenPLi 3.0: from alpha to beta status.... #52 greatred

  • Senior Member
  • 268 posts

+2
Neutral

Posted 26 September 2012 - 22:55

many thanks blzr for clarifying this :unsure:

Re: OpenPLi 3.0: from alpha to beta status.... #53 Dimitrij

  • PLi® Core member
  • 10,276 posts

+347
Excellent

Posted 1 October 2012 - 11:08

http://openpli.git.s...210b2098e7d63d7

GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K


Re: OpenPLi 3.0: from alpha to beta status.... #54 littlesat

  • PLi® Core member
  • 57,081 posts

+698
Excellent

Posted 1 October 2012 - 11:12

EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
action -> EPGSelectActions red
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
File "/usr/lib/enigma2/python/Screens/EpgSelection.py", line 190, in zapTo
File "/usr/lib/enigma2/python/Screens/EpgSelection.py", line 199, in zapSelectedService
TypeError: zapToService() got an unexpected keyword argument 'preview'

Mmmm... does it take zapToService from InfobarGenerics instead of channelselection there????

But in InfoBarGenerics there are to ZapToService-s.....????

Edited by littlesat, 1 October 2012 - 11:18.

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: OpenPLi 3.0: from alpha to beta status.... #55 Dimitrij

  • PLi® Core member
  • 10,276 posts

+347
Excellent

Posted 1 October 2012 - 11:17

This log handed Russian-speaking users, after today's update.

Exit from multiEPG, channel where there is no EPG

Edited by Dima73, 1 October 2012 - 11:20.

GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K


Re: OpenPLi 3.0: from alpha to beta status.... #56 maigais

  • Senior Member
  • 431 posts

+4
Neutral

Posted 1 October 2012 - 16:58

OpenPLi-2.1-beta-dm800 the green and crashlog

File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
res = self.actions[action]()
File "/usr/lib/enigma2/python/Screens/EpgSelection.py", line 131, in closeScreen
self.zapFunc(None, zapback = True)
TypeError: zapToService() got an unexpected keyword argument 'zapback'

Attached Files


BlackHole-3.1.0F_DM800 ,Tuner + ALINK DTU & Digital USB DVB-T HDTV TV Tuner Recorder Receiver , HDD TOSHIBA MK2552GSX 250gb,usb 16gb,skins Glamour_X-Infinity mod


Re: OpenPLi 3.0: from alpha to beta status.... #57 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 1 October 2012 - 17:58

http://openpli.git.s...df8dd993fe659fa

Re: OpenPLi 3.0: from alpha to beta status.... #58 Dimitrij

  • PLi® Core member
  • 10,276 posts

+347
Excellent

Posted 1 October 2012 - 18:27

http://openpli.git.s...df8dd993fe659fa

Sorri
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
  File "/usr/lib/enigma2/python/Screens/EpgSelection.py", line 131, in closeScreen
TypeError: selectAndStartService() got an unexpected keyword argument 'zapback'

GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K


Re: OpenPLi 3.0: from alpha to beta status.... #59 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 1 October 2012 - 18:37

retry http://openpli.git.s...df8dd993fe659fa

Re: OpenPLi 3.0: from alpha to beta status.... #60 littlesat

  • PLi® Core member
  • 57,081 posts

+698
Excellent

Posted 1 October 2012 - 18:41

I think this does not solve it....

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W



1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users