282 replies to this topic

[gulipin]

Is it possible to have picons on OLED?

[pedro06]

Ok installed 3.0, almost everything works, but major think doesnt. Downloaded Mgcamd from plugins menu. Pasted newcamd.list to keys folder. I got timings to server, but black screen, any solution? What should i change in Mgcamd's setup to make it work on 3.0

take a look at mg_cfg - i suppose boxtype is set to automatic in your config (06 required)

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 10 stapi/openbox
# 11 enigma/ipbox
# 12 octagon
B: { 06 }

edit: opkg install libcrypto-compat (if no libcrypto.so.0.9.7 available in /usr/lib dir)

I have flashed my box to the 3.3.2 and I also have problem with mgcamd too.... I can't make it to work :-( I downloaded the mgdcam 1.35a form the plugins menu. I have also tried it with tspanel but it wont work either....
I have re flashed it many times with dif version the "3" pli... nothing help. Flashing it with other image it works perfectly.... :-( I have not used the previous version of open pli this is the first one and I like it so much.
My box is an DM500HD.

Pedro

[pedro06]

Ok installed 3.0, almost everything works, but major think doesnt. Downloaded Mgcamd from plugins menu. Pasted newcamd.list to keys folder. I got timings to server, but black screen, any solution? What should i change in Mgcamd's setup to make it work on 3.0

take a look at mg_cfg - i suppose boxtype is set to automatic in your config (06 required)

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 10 stapi/openbox
# 11 enigma/ipbox
# 12 octagon
B: { 06 }

edit: opkg install libcrypto-compat (if no libcrypto.so.0.9.7 available in /usr/lib dir)

I have flashed my box to the 3.3.2 and I also have problem with mgcamd too.... I can't make it to work :-( I downloaded the mgdcam 1.35a form the plugins menu. I have also tried it with tspanel but it wont work either....
I have re flashed it many times with dif version the "3" pli... nothing help. Flashing it with other image it works perfectly.... :-( I have not used the previous version of open pli this is the first one and I like it so much.
My box is an DM500HD.

Pedro

Sorry mixed abit about version ;-) OpenPLi 3.0 beta is the version I have flashed..... The "3.3.2" is another image that I did not like too much...

Edited by pedro06, 17 January 2013 - 23:46.

[pedro06]

Ok installed 3.0, almost everything works, but major think doesnt. Downloaded Mgcamd from plugins menu. Pasted newcamd.list to keys folder. I got timings to server, but black screen, any solution? What should i change in Mgcamd's setup to make it work on 3.0

take a look at mg_cfg - i suppose boxtype is set to automatic in your config (06 required)

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 10 stapi/openbox
# 11 enigma/ipbox
# 12 octagon
B: { 06 }

edit: opkg install libcrypto-compat (if no libcrypto.so.0.9.7 available in /usr/lib dir)

I have flashed my box to the 3.3.2 and I also have problem with mgcamd too.... I can't make it to work :-( I downloaded the mgdcam 1.35a form the plugins menu. I have also tried it with tspanel but it wont work either....
I have re flashed it many times with dif version the "3" pli... nothing help. Flashing it with other image it works perfectly.... :-( I have not used the previous version of open pli this is the first one and I like it so much.
My box is an DM500HD.

Pedro

Sorry mixed abit about version ;-) OpenPLi 3.0 beta is the version I have flashed..... The "3.3.2" is another image that I did not like too much...

Problem fixed..... don't know actually what was the problem..... I re-flashed teh image again and it works nicely now.

[tomek]

Fresh Pli 3.0 on vu solo.
There is no ecm info at the bottom of the skin.
Also no CA info at the top (all CA systems remains yellow)

Problem also occurs with default pli hd skin.

Edited by tomek, 29 January 2013 - 01:08.

[veskop]

Fresh Pli 3.0 on vu solo.
There is no ecm info at the bottom of the skin.
Also no CA info at the top (all CA systems remains yellow)

Problem also occurs with default pli hd skin.

No problem here...image is up to date (29.01)

[Bernado]

GetEcmInfo for mgcamd is broken since 20th Jan. (partial rewrite)

Reason: different calculation concering responsetime needed for mgcamd compared to cccam - there is no ECM: in ECM.info file done by mgcamd, just 'timevalue' msec (take a look at mgcamd section)

[BuGless]

GetEcmInfo for mgcamd is broken since 20th Jan. (partial rewrite)

Reason: different calculation concering responsetime needed for mgcamd compared to cccam - there is no ECM: in ECM.info file done by mgcamd, just 'timevalue' msec (take a look at mgcamd section)

You lost me a bit in that explanation here. As far as I can see, the code just added functionality.
Or do you mean that mgcamd just writes a single line into the ecm.info file with no field definition, just a plain time value?

[littlesat]

Post an ecm.info from mgcamd here...

[Bernado]

...
You lost me a bit in that explanation here. As far as I can see, the code just added functionality.
Or do you mean that mgcamd just writes a single line into the ecm.info file with no field definition, just a plain time value?

exactly, code for it is still there but due to adding 'getEcmData' got ignored atm

ecm.info:

system: Viaccess
caid: 0x0500
pid: 0x02d9
prov: 040810
cw0: 56 56 56 56 56 56 56 56
cw1: 56 56 56 56 56 56 56 56
Signature OK
source: net (newcamd at 192.168.256.256:25656)
356 msec -- Wed Jan 30 17:26:17 2013


btw. please change time = " ?" to time = " " - in emumode mgcamd creates just an empty ecm.info

Edited by Bernado, 30 January 2013 - 17:33.

[BuGless]

exactly, code for it is still there but due to adding 'getEcmData' got ignored atm

Ok, problem found and fixed. Testing it now, it will probably be committed after the weekend.

[tr45h]

Today I started migrating from OpenPLi 2.1 to OpenPLi 3.0. The main reason is that I hope to get more functionality in 'Dreamote' (IPAD app) in combination with newest version of OpenWebif. Concrete I want to be able to control AutoTimer and EPGRefresh plugins from Ipad/dreamote.

Thanks to plugin 'AutoBackup' migrating if the most settings was no problem. I even did not need a satelitte scan. However I have problems with provided mgcamd version. Currently I get no picture when running encrypted channels.. According to logs decuryption is fine but no picture. I will now downgrade to OpenPLi 2.1 to have picture bacl (circumvent family problems :-)... After above fix is online I will reflash 3.0 and try again (assuming my "no picture problem) has something to do with what reported ba Bernado and fixed by BluGless)

[BuGless]

exactly, code for it is still there but due to adding 'getEcmData' got ignored atm

Ok, problem found and fixed. Testing it now, it will probably be committed after the weekend.

The fix is in there. Please verify if it works.

[tr45h]

Reflashed 3.0 - still no picture but I found the solution: AutoBackup does not migrate contents of usr/keys --> some settings wrong in mg_cfg due to standard config
(e.g. "box type" autodetection does not work it should be set to to 06)

[adri]

Reflashed 3.0 - still no picture but I found the solution: AutoBackup does not migrate contents of usr/keys --> some settings wrong in mg_cfg due to standard config
(e.g. "box type" autodetection does not work it should be set to to 06)

You can add /usr/keys to /etc/backup.cfg.
By default AutoBackup doesn't backup any keys etc.
You can add extra files or directories, one per line.

[tomek]

exactly, code for it is still there but due to adding 'getEcmData' got ignored atm

Ok, problem found and fixed. Testing it now, it will probably be committed after the weekend.

The fix is in there. Please verify if it works.

for me still no ecm/ca info.
mgcamd 1.35 and img updated today.

[tr45h]

@adri thanks for this hint!

[BuGless]

for me still no ecm/ca info.
mgcamd 1.35 and img updated today.

Strange. I'll try and install mgcamd myself to see what happens.

[vaicekas]

for me still no ecm/ca info.
mgcamd 1.35 and img updated today.

Strange. I'll try and install mgcamd myself to see what happens.

I can confirm, there is no ecm info line.
Receiver Xtrend ET ​​6500, OpenPli 3.0 latest, pli-HD skin, mgcamd 135a.

Edited by vaicekas, 5 February 2013 - 10:40.

[Henksat]

I can confirm, there is no ecm info line.

Maybe it`s disabled in expert settings? See your menu to confirm.