16 replies to this topic

[Dascon]

Hello,

Today I wanted to add another timer on my ET9000. It was not possible due to another timer was set at the same time. Both tuners are working correctly, while one recording is active, I can watch all other stations.

I have noticed that behaviour on PLI 3.0 updated on Nov 7, after updating today to the current version of PLI 3.0, same behaviour.

With PLI 2.1 everything worked correctly, 6 recordings at the same time were no problem.

Does someone know how to fix this bug?

Regards,
Dascon

[littlesat]

Here in a Dutch thread the same issue: http://openpli.org/f...timer-conflict/

[Stefan_Salewski]

Here in a Dutch thread the same issue: http://openpli.org/f...timer-conflict/

Similar problems with two VU+ DUO boxes, one updated yesterday, one today. OpenPLI 3.0.
Recording of two overlapping recordings of the same channel (RTL) was not possible -- which should work even with only one tuner. (I have two tuners available, working fine with OpenPli 3.0 before.) The problem occurs also with different channes, but for some combinations it seems to work with no conflicts.

[hemertje]

try to update in a hour

[pieterg]

no, there is no fix for this issue yet

[Stefan_Salewski]

no, there is no fix for this issue yet

Some more details for Vu+ DUO, OpenPLI 3.0:
Currently I am recording ZDF-HD, and I can watch BR-alpha (non HD) on german Astra 19.2. But I can not record BR-apha -- conficting timer is reported. So problem seems to be not related to Tuners itself.

[littlesat]

no, there is no fix for this issue yet

So everyone has to be a bit patient....

[sjlouis]

I had a problem slightly different. I wanted to do 3 records in the same time, it was not the first time, and when I wanted to see them, there were a lot of blocking and when I jumped over the blocked image, I can see there was a lot of time elapsed : I wanted to jump with the numeric key for 7 seconds and in fact, there was a lot of minutes and if the length of the record was good, it continued a lot on the following broadcast. I have to delete all the records .

Thank you.

[littlesat]

I suggest that not correctly recorded recordings is not the subject here.... The subject here is that you cannot plan them....

[sjlouis]

Ok, thank you.

[blzr]

no, there is no fix for this issue yet

hmm, strange thing, yesterday I had this 'only one recording at time possible' issue too,
and today it has mysteriously gone /?/ (even before performing the update...)
no idea what have I done in the meantime, performed full reboot maybe?

Attached Files

•  screenshot.jpg   98.74KB   24 downloads

[pieterg]

weird, I did not really find any cause for this problem, and did not fix anything obviously related.
However, if you say so, it must have been an (unexpected) sideeffect of one of the issues which got fixed yesterday.

[blzr]

just to clarify, I encountered this issue yesterday (and then today it's gone /without (!) an update/) on vuduo...
since there's no feedback from et9xx0 users here, I am not sure if it's fixed for their boxes too /?/

[Davidr3]

I can confirm that it isn't fixed for ET9000. Tried a reboot, no luck. Upgraded, no luck and a reboot after upgrade, still no luck.

[atilaks]

Funny, issue is really gone if I try to add timers for dvb-s channels,

It is however still present if I try to add overlapping timers for a dvb-c channel.

Same thing if I add two timers for two dvb-c channels even though I do have two dvb-c usb tuners

[atilaks]

sorry, I forgot to mention I have vuduo

[pieterg]

fix has been applied, new build is being produced